aeibu

aegis -Integrate_Begin_Undo(General Commands Manaegis -Integrate_Begin_Undo(1)



NAME
        aegis integrate begin undo - reverse the aeib command

SYNOPSIS
        aegis -Integrate_Begin_Undo [ option...  ]
        aegis -Integrate_Begin_Undo -List [ option...  ]
        aegis -Integrate_Begin_Undo -Help

DESCRIPTION
        The aegis -Integrate_Begin_Undo command is used to reverse the actions
        of the 'aegis -Integrate_Begin' command.

        Successful execution of this command will move the change from the
        being integrated state to the awaiting integration state.  The
        integration directory will be deleted.  The change will cease to be
        assigned to the current user.
             ┌─────────┐
            ├┤awaiting │
            integration│
             └────┬────┘
         integrate│integrate
         begin    ┬begin
         undo┌────┴────┐
             │ being   │
             integrated│
             └─────────┘

        In the unlikely event that an integrator has wandered away and left an
        integration incomplete (say, went on holidays and won't be back for
        two weeks), project administrators are also able to use this command.

   Notification
        On successful completion of this command, the integration_begin_undo_‐
        command field of the project config file is run, if set.  See
        aepconf(5) for more information.

OPTIONS
        The following options are understood:

        -Change number
                This option may be used to specify a particular change within
                a project.  See aegis(1) for a complete description of this
                option.

        -Help
                This option may be used to obtain more information about how
                to use the aegis program.

        -Keep
                This option may be used to retain files and/or directories
                usually deleted or replaced by the command.  Defaults to the
                user's delete_file_preference if not specified, see aeuconf(5)
                for more information.

        -No_Keep
                This option may be used to ensure that the files and/or
                directories are deleted or replaced by the command.  Defaults
                to the user's delete_file_preference if not specified, see
                aeuconf(5) for more information.

        -List
                This option may be used to obtain a list of suitable subjects
                for this command.  The list may be more general than expected.

        -Project name
                This option may be used to select the project of interest.
                When no -Project option is specified, the AEGIS_PROJECT
                environment variable is consulted.  If that does not exist,
                the user's $HOME/.aegisrc file is examined for a default
                project field (see aeuconf(5) for more information).  If that
                does not exist, when the user is only working on changes
                within a single project, the project name defaults to that
                project.  Otherwise, it is an error.

        -REAson text
                This option may be used to attach a comment to the change
                history generated by this command.  You will need to use
                quotes to insulate the spaces from the shell.

        -TERse
                This option may be used to cause listings to produce the bare
                minimum of information.  It is usually useful for shell
                scripts.

        -Verbose
                This option may be used to cause aegis to produce more output.
                By default aegis only produces output on errors.  When used
                with the -List option this option causes column headings to be
                added.

        -Wait   This option may be used to require Aegis commands to wait for
                access locks, if they cannot be obtained immediately.
                Defaults to the user's lock_wait_preference if not specified,
                see aeuconf(5) for more information.

        -No_Wait
                This option may be used to require Aegis commands to emit a
                fatal error if access locks cannot be obtained immediately.
                Defaults to the user's lock_wait_preference if not specified,
                see aeuconf(5) for more information.

        See also aegis(1) for options common to all aegis commands.

        All options may be abbreviated; the abbreviation is documented as the
        upper case letters, all lower case letters and underscores (_) are
        optional.  You must use consecutive sequences of optional letters.

        All options are case insensitive, you may type them in upper case or
        lower case or a combination of both, case is not important.

        For example: the arguments “-project”, “-PROJ” and “-p” are all
        interpreted to mean the -Project option.  The argument “-prj” will not
        be understood, because consecutive optional characters were not
        supplied.

        Options and other command line arguments may be mixed arbitrarily on
        the command line, after the function selectors.

        The GNU long option names are understood.  Since all option names for
        aegis are long, this means ignoring the extra leading '-'.  The
        “--option=value” convention is also understood.

RECOMMENDED ALIAS
        The recommended alias for this command is
        csh%    alias aeibu 'aegis -ibu \!* -v'
        sh$     aeibu(){aegis -ibu "$@" -v}

ERRORS
        It is an error if the change is not in the being_integrated state.
        It is an error if the change is not assigned to the current user and
        the current user is not a project administrator.

EXIT STATUS
        The aegis command will exit with a status of 1 on any error.  The
        aegis command will only exit with a status of 0 if there are no
        errors.

ENVIRONMENT VARIABLES
        See aegis(1) for a list of environment variables which may affect this
        command.  See aepconf(5) for the project configuration file's
        project_specific field for how to set environment variables for all
        commands executed by Aegis.

SEE ALSO
        aeib(1) begin integration of a change

        aeuconf(5)
                user configuration file format

COPYRIGHT
        aegis version 4.25.D510
        Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
        2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
        2011, 2012 Peter Miller

        The aegis program comes with ABSOLUTELY NO WARRANTY; for details use
        the 'aegis -VERSion License' command.  This is free software and you
        are welcome to redistribute it under certain conditions; for details
        use the 'aegis -VERSion License' command.

AUTHOR
        Peter Miller   E‐Mail:   pmiller@opensource.org.au
        /\/\*             WWW:   http://miller.emu.id.au/pmiller/



Reference Manual                     Aegis      aegis -Integrate_Begin_Undo(1)