APLAY(1)                     General Commands Manual                    APLAY(1)

       arecord, aplay - command-line sound recorder and player for ALSA
       soundcard driver

       arecord [flags] [filename]
       aplay [flags] [filename [filename]] ...

       arecord is a command-line soundfile recorder for the ALSA soundcard
       driver. It supports several file formats and multiple soundcards with
       multiple devices. If recording with interleaved mode samples the file is
       automatically split before the 2GB filesize.

       aplay is much the same, only it plays instead of recording. For supported
       soundfile formats, the sampling rate, bit depth, and so forth can be
       automatically determined from the soundfile header.

       If filename is not specified, the standard output or input is used. The
       aplay utility accepts multiple filenames.

       -h, --help
              Help: show syntax.

              Print current version.

       -l, --list-devices
              List all soundcards and digital audio devices

       -L, --list-pcms
              List all PCMs defined

       -D, --device=NAME
              Select PCM by name

       -q --quiet
              Quiet mode. Suppress messages (not sound :))

       -t, --file-type TYPE
              File type (voc, wav, raw or au).  If this parameter is omitted the
              WAVE format is used.

       -c, --channels=#
              The number of channels.  The default is one channel.  Valid values
              are 1 through 32.

       -f --format=FORMAT
              Sample format
              Recognized sample formats are: S8 U8 S16_LE S16_BE U16_LE U16_BE
              S24_LE S24_BE U24_LE U24_BE S32_LE S32_BE U32_LE U32_BE FLOAT_LE
              S24_3BE U24_3LE U24_3BE S20_3LE S20_3BE U20_3LE U20_3BE S18_3LE
              S18_3BE U18_3LE
              Some of these may not be available on selected hardware
              The available format shortcuts are:
              -f cd (16 bit little endian, 44100, stereo) [-f S16_LE -c2 -r44100]
              -f cdr (16 bit big endian, 44100, stereo) [-f S16_BE -c2 -r44100]
              -f dat (16 bit little endian, 48000, stereo) [-f S16_LE -c2 -r48000]
              If no format is given U8 is used.

       -r, --rate=#<Hz>
              Sampling rate in Hertz. The default rate is 8000 Hertz.  If the
              value specified is less than 300, it is taken as the rate in
              kilohertz.  Valid values are 2000 through 192000 Hertz.

       -d, --duration=#
              Interrupt after # seconds.  A value of zero means infinity.  The
              default is zero, so if this option is omitted then the
              record/playback process will run until it is killed.  Either '-d'
              or '-s' option is available exclusively.

       -s, --samples=#
              Interrupt after transmission of # PCM frames.  A value of zero
              means infinity.  The default is zero, so if this options is
              omitted then the record/playback process will run until it is
              killed.  Either '-d' or '-s' option is available exclusively.

       -M, --mmap
              Use memory-mapped (mmap) I/O mode for the audio stream.  If this
              option is not set, the read/write I/O mode will be used.

       -N, --nonblock
              Open the audio device in non-blocking mode. If the device is busy
              the program will exit immediately.  If this option is not set the
              program will block until the audio device is available again.

       -F, --period-time=#
              Distance between interrupts is # microseconds.  If no period time
              and no period size is given then a quarter of the buffer time is

       -B, --buffer-time=#
              Buffer duration is # microseconds If no buffer time and no buffer
              size is given then the maximal allowed buffer time but not more
              than 500ms is set.

              Distance between interrupts is # frames If no period size and no
              period time is given then a quarter of the buffer size is set.

              Buffer duration is # frames If no buffer time and no buffer size
              is given then the maximal allowed buffer time but not more than
              500ms is set.

       -A, --avail-min=#
              Min available space for wakeup is # microseconds

       -R, --start-delay=#
              Delay for automatic PCM start is # microseconds (relative to
              buffer size if <= 0)

       -T, --stop-delay=#
              Delay for automatic PCM stop is # microseconds from xrun

       -v, --verbose
              Show PCM structure and setup.  This option is accumulative.  The
              VU meter is displayed when this is given twice or three times.

       -V, --vumeter=TYPE
              Specifies the VU-meter type, either stereo or mono.  The stereo
              VU-meter is available only for 2-channel stereo samples with
              interleaved format.

       -I, --separate-channels
              One file for each channel.  This option disables max-file-time and
              use-strftime, and ignores SIGUSR1.  The stereo VU meter is not
              available with separate channels.

       -P     Playback.  This is the default if the program is invoked by typing

       -C     Record.  This is the default if the program is invoked by typing

       -i, --interactive
              Allow interactive operation via stdin.  Currently only
              pause/resume via space or enter key is implemented.

       -m, --chmap=ch1,ch2,...
              Give the channel map to override or follow.  Pass channel position
              strings like FL, FR, etc.

              If a device supports the override of the channel map, aplay tries
              to pass the given channel map.  If it doesn't support the channel
              map override but still it provides the channel map information,
              aplay tries to rearrange the channel order in the buffer to match
              with the returned channel map from the device.

              Disable automatic rate resample.

              Disable automatic channel conversions.

              Disable automatic format conversions.

              Disable software volume control (softvol).

              Test ring buffer position.

              Test coefficient for ring buffer position; default is 8.
              Expression for validation is: coef * (buffer_size / 2).  Minimum
              value is 1.

              Do not wait for the ring buffer ‐ eats the whole CPU.

              While recording, when the output file has been accumulating sound
              for this long, close it and open a new output file.  Default is
              the maximum size supported by the file format: 2 GiB for WAV
              files.  This option has no effect if  --separate-channels is

       --process-id-file <file name>
              aplay writes its process ID here, so other programs can send
              signals to it.

              When recording, interpret %-codes in the file name parameter using
              the strftime facility whenever the output file is opened.  The
              important strftime codes are: %Y is the year, %m month, %d day of
              the month, %H hour, %M minute and %S second.  In addition, %v is
              the file number, starting at 1.  When this option is specified,
              intermediate directories for the output file are created
              automatically.  This option has no effect if --separate-channels
              is specified.

              Dump hw_params of the device preconfigured status to stderr. The
              dump lists capabilities of the selected device such as supported
              formats, sampling rates, numbers of channels, period and buffer
              bytes/sizes/times.  For raw device hw:X this option basically
              lists hardware capabilities of the soundcard.

              Disables recovery attempts when errors (e.g. xrun) are
              encountered; the aplay process instead aborts immediately.

       When recording, SIGINT, SIGTERM and SIGABRT will close the output file
       and exit.  SIGUSR1 will close the output file, open a new one, and
       continue recording.  However, SIGUSR1 does not work with

       aplay -c 1 -t raw -r 22050 -f mu_law foobar
              will play the raw file "foobar" as a 22050-Hz, mono, 8-bit, Mu-Law
              .au file.

       arecord -d 10 -f cd -t wav -D copy foobar.wav
              will record foobar.wav as a 10-second, CD-quality wave file, using
              the PCM "copy" (which might be defined in the user's .asoundrc
              file as:
              pcm.copy {
                type plug
                slave {
                  pcm hw
                route_policy copy

       arecord -t wav --max-file-time 30 mon.wav
              Record from the default audio source in monaural, 8,000 samples
              per second, 8 bits per sample.  Start a new file every 30 seconds.
              File names are mon-nn.wav, where nn increases from 01.  The file
              after mon-99.wav is mon-100.wav.

       arecord -f cd -t wav --max-file-time 3600 --use-strftime
              Record in stereo from the default audio source.  Create a new file
              every hour.  The files are placed in directories based on their
              start dates and have names which include their start times and
              file numbers.

        alsamixer(1), amixer(1)

       Note that .aiff files are not currently supported.

       arecord and aplay are by Jaroslav Kysela <perex@perex.cz> This document
       is by Paul Winkler <zarmzarm@erols.com>.  Updated for Alsa 0.9 by James
       Tappin <james@xena.uklinux.net>

                                 1 January 2010                         APLAY(1)