complex_blas_level2(3) LAPACK complex_blas_level2(3) NAME complex_blas_level2 SYNOPSISFunctionssubroutinecgbmv(TRANS, M,N, KL, KU, ALPHA, A,LDA, X, INCX, BETA, Y, INCY)CGBMVsubroutinecgemv(TRANS, M,N, ALPHA, A,LDA, X, INCX, BETA, Y, INCY)CGEMVsubroutinecgerc(M,N, ALPHA, X, INCX, Y, INCY, A,LDA)CGERCsubroutinecgeru(M,N, ALPHA, X, INCX, Y, INCY, A,LDA)CGERUsubroutinechbmv(UPLO,N, K, ALPHA, A,LDA, X, INCX, BETA, Y, INCY)CHBMVsubroutinechemv(UPLO,N, ALPHA, A,LDA, X, INCX, BETA, Y, INCY)CHEMVsubroutinecher(UPLO,N, ALPHA, X, INCX, A,LDA)CHERsubroutinecher2(UPLO,N, ALPHA, X, INCX, Y, INCY, A,LDA)CHER2subroutinechpmv(UPLO,N, ALPHA, AP, X, INCX, BETA, Y, INCY)CHPMVsubroutinechpr(UPLO,N, ALPHA, X, INCX, AP)CHPRsubroutinechpr2(UPLO,N, ALPHA, X, INCX, Y, INCY, AP)CHPR2subroutinectbmv(UPLO, TRANS, DIAG,N, K, A,LDA, X, INCX)CTBMVsubroutinectbsv(UPLO, TRANS, DIAG,N, K, A,LDA, X, INCX)CTBSVsubroutinectpmv(UPLO, TRANS, DIAG,N, AP, X, INCX)CTPMVsubroutinectpsv(UPLO, TRANS, DIAG,N, AP, X, INCX)CTPSVsubroutinectrmv(UPLO, TRANS, DIAG,N, A,LDA, X, INCX)CTRMVsubroutinectrsv(UPLO, TRANS, DIAG,N, A,LDA, X, INCX)CTRSVDetailed Description This is the group of complex LEVEL 2 BLAS routines. Function Documentationsubroutine cgbmv (character TRANS, integer M, integer N, integer KL,integer KU, complex ALPHA, complex, dimension(lda,*) A, integer LDA,complex, dimension(*) X, integer INCX, complex BETA, complex,dimension(*) Y, integer INCY)CGBMVPurpose:CGBMV performs one of the matrix-vector operations y := alpha*A*x + beta*y, or y := alpha*A**T*x + beta*y, or y := alpha*A**H*x + beta*y, where alpha and beta are scalars, x and y are vectors and A is an m by n band matrix, with kl sub-diagonals and ku super-diagonals.ParametersTRANSTRANS is CHARACTER*1 On entry, TRANS specifies the operation to be performed as follows: TRANS = 'N' or 'n' y := alpha*A*x + beta*y. TRANS = 'T' or 't' y := alpha*A**T*x + beta*y. TRANS = 'C' or 'c' y := alpha*A**H*x + beta*y.MM is INTEGER On entry, M specifies the number of rows of the matrix A. M must be at least zero.NN is INTEGER On entry, N specifies the number of columns of the matrix A. N must be at least zero.KLKL is INTEGER On entry, KL specifies the number of sub-diagonals of the matrix A. KL must satisfy 0 .le. KL.KUKU is INTEGER On entry, KU specifies the number of super-diagonals of the matrix A. KU must satisfy 0 .le. KU.ALPHAALPHA is COMPLEX On entry, ALPHA specifies the scalar alpha.AA is COMPLEX array, dimension ( LDA, N ) Before entry, the leading ( kl + ku + 1 ) by n part of the array A must contain the matrix of coefficients, supplied column by column, with the leading diagonal of the matrix in row ( ku + 1 ) of the array, the first super-diagonal starting at position 2 in row ku, the first sub-diagonal starting at position 1 in row ( ku + 2 ), and so on. Elements in the array A that do not correspond to elements in the band matrix (such as the top left ku by ku triangle) are not referenced. The following program segment will transfer a band matrix from conventional full matrix storage to band storage: DO 20, J = 1, N K = KU + 1 - J DO 10, I = MAX( 1, J - KU ), MIN( M, J + KL ) A( K + I, J ) = matrix( I, J ) 10 CONTINUE 20 CONTINUELDALDA is INTEGER On entry, LDA specifies the first dimension of A as declared in the calling (sub) program. LDA must be at least ( kl + ku + 1 ).XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ) when TRANS = 'N' or 'n' and at least ( 1 + ( m - 1 )*abs( INCX ) ) otherwise. Before entry, the incremented array X must contain the vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.BETABETA is COMPLEX On entry, BETA specifies the scalar beta. When BETA is supplied as zero then Y need not be set on input.YY is COMPLEX array, dimension at least ( 1 + ( m - 1 )*abs( INCY ) ) when TRANS = 'N' or 'n' and at least ( 1 + ( n - 1 )*abs( INCY ) ) otherwise. Before entry, the incremented array Y must contain the vector y. On exit, Y is overwritten by the updated vector y.INCYINCY is INTEGER On entry, INCY specifies the increment for the elements of Y. INCY must not be zero.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. The vector and matrix arguments are not referenced when N = 0, or M = 0 -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 188 of file cgbmv.f.subroutine cgemv (character TRANS, integer M, integer N, complex ALPHA,complex, dimension(lda,*) A, integer LDA, complex, dimension(*) X,integer INCX, complex BETA, complex, dimension(*) Y, integer INCY)CGEMVPurpose:CGEMV performs one of the matrix-vector operations y := alpha*A*x + beta*y, or y := alpha*A**T*x + beta*y, or y := alpha*A**H*x + beta*y, where alpha and beta are scalars, x and y are vectors and A is an m by n matrix.ParametersTRANSTRANS is CHARACTER*1 On entry, TRANS specifies the operation to be performed as follows: TRANS = 'N' or 'n' y := alpha*A*x + beta*y. TRANS = 'T' or 't' y := alpha*A**T*x + beta*y. TRANS = 'C' or 'c' y := alpha*A**H*x + beta*y.MM is INTEGER On entry, M specifies the number of rows of the matrix A. M must be at least zero.NN is INTEGER On entry, N specifies the number of columns of the matrix A. N must be at least zero.ALPHAALPHA is COMPLEX On entry, ALPHA specifies the scalar alpha.AA is COMPLEX array, dimension ( LDA, N ) Before entry, the leading m by n part of the array A must contain the matrix of coefficients.LDALDA is INTEGER On entry, LDA specifies the first dimension of A as declared in the calling (sub) program. LDA must be at least max( 1, m ).XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ) when TRANS = 'N' or 'n' and at least ( 1 + ( m - 1 )*abs( INCX ) ) otherwise. Before entry, the incremented array X must contain the vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.BETABETA is COMPLEX On entry, BETA specifies the scalar beta. When BETA is supplied as zero then Y need not be set on input.YY is COMPLEX array, dimension at least ( 1 + ( m - 1 )*abs( INCY ) ) when TRANS = 'N' or 'n' and at least ( 1 + ( n - 1 )*abs( INCY ) ) otherwise. Before entry with BETA non-zero, the incremented array Y must contain the vector y. On exit, Y is overwritten by the updated vector y.INCYINCY is INTEGER On entry, INCY specifies the increment for the elements of Y. INCY must not be zero.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. The vector and matrix arguments are not referenced when N = 0, or M = 0 -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 159 of file cgemv.f.subroutine cgerc (integer M, integer N, complex ALPHA, complex,dimension(*) X, integer INCX, complex, dimension(*) Y, integer INCY,complex, dimension(lda,*) A, integer LDA)CGERCPurpose:CGERC performs the rank 1 operation A := alpha*x*y**H + A, where alpha is a scalar, x is an m element vector, y is an n element vector and A is an m by n matrix.ParametersMM is INTEGER On entry, M specifies the number of rows of the matrix A. M must be at least zero.NN is INTEGER On entry, N specifies the number of columns of the matrix A. N must be at least zero.ALPHAALPHA is COMPLEX On entry, ALPHA specifies the scalar alpha.XX is COMPLEX array, dimension at least ( 1 + ( m - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the m element vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.YY is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCY ) ). Before entry, the incremented array Y must contain the n element vector y.INCYINCY is INTEGER On entry, INCY specifies the increment for the elements of Y. INCY must not be zero.AA is COMPLEX array, dimension ( LDA, N ) Before entry, the leading m by n part of the array A must contain the matrix of coefficients. On exit, A is overwritten by the updated matrix.LDALDA is INTEGER On entry, LDA specifies the first dimension of A as declared in the calling (sub) program. LDA must be at least max( 1, m ).AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 131 of file cgerc.f.subroutine cgeru (integer M, integer N, complex ALPHA, complex,dimension(*) X, integer INCX, complex, dimension(*) Y, integer INCY,complex, dimension(lda,*) A, integer LDA)CGERUPurpose:CGERU performs the rank 1 operation A := alpha*x*y**T + A, where alpha is a scalar, x is an m element vector, y is an n element vector and A is an m by n matrix.ParametersMM is INTEGER On entry, M specifies the number of rows of the matrix A. M must be at least zero.NN is INTEGER On entry, N specifies the number of columns of the matrix A. N must be at least zero.ALPHAALPHA is COMPLEX On entry, ALPHA specifies the scalar alpha.XX is COMPLEX array, dimension at least ( 1 + ( m - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the m element vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.YY is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCY ) ). Before entry, the incremented array Y must contain the n element vector y.INCYINCY is INTEGER On entry, INCY specifies the increment for the elements of Y. INCY must not be zero.AA is COMPLEX array, dimension ( LDA, N ) Before entry, the leading m by n part of the array A must contain the matrix of coefficients. On exit, A is overwritten by the updated matrix.LDALDA is INTEGER On entry, LDA specifies the first dimension of A as declared in the calling (sub) program. LDA must be at least max( 1, m ).AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 131 of file cgeru.f.subroutine chbmv (character UPLO, integer N, integer K, complex ALPHA,complex, dimension(lda,*) A, integer LDA, complex, dimension(*) X,integer INCX, complex BETA, complex, dimension(*) Y, integer INCY)CHBMVPurpose:CHBMV performs the matrix-vector operation y := alpha*A*x + beta*y, where alpha and beta are scalars, x and y are n element vectors and A is an n by n hermitian band matrix, with k super-diagonals.ParametersUPLOUPLO is CHARACTER*1 On entry, UPLO specifies whether the upper or lower triangular part of the band matrix A is being supplied as follows: UPLO = 'U' or 'u' The upper triangular part of A is being supplied. UPLO = 'L' or 'l' The lower triangular part of A is being supplied.NN is INTEGER On entry, N specifies the order of the matrix A. N must be at least zero.KK is INTEGER On entry, K specifies the number of super-diagonals of the matrix A. K must satisfy 0 .le. K.ALPHAALPHA is COMPLEX On entry, ALPHA specifies the scalar alpha.AA is COMPLEX array, dimension ( LDA, N ) Before entry with UPLO = 'U' or 'u', the leading ( k + 1 ) by n part of the array A must contain the upper triangular band part of the hermitian matrix, supplied column by column, with the leading diagonal of the matrix in row ( k + 1 ) of the array, the first super-diagonal starting at position 2 in row k, and so on. The top left k by k triangle of the array A is not referenced. The following program segment will transfer the upper triangular part of a hermitian band matrix from conventional full matrix storage to band storage: DO 20, J = 1, N M = K + 1 - J DO 10, I = MAX( 1, J - K ), J A( M + I, J ) = matrix( I, J ) 10 CONTINUE 20 CONTINUE Before entry with UPLO = 'L' or 'l', the leading ( k + 1 ) by n part of the array A must contain the lower triangular band part of the hermitian matrix, supplied column by column, with the leading diagonal of the matrix in row 1 of the array, the first sub-diagonal starting at position 1 in row 2, and so on. The bottom right k by k triangle of the array A is not referenced. The following program segment will transfer the lower triangular part of a hermitian band matrix from conventional full matrix storage to band storage: DO 20, J = 1, N M = 1 - J DO 10, I = J, MIN( N, J + K ) A( M + I, J ) = matrix( I, J ) 10 CONTINUE 20 CONTINUE Note that the imaginary parts of the diagonal elements need not be set and are assumed to be zero.LDALDA is INTEGER On entry, LDA specifies the first dimension of A as declared in the calling (sub) program. LDA must be at least ( k + 1 ).XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.BETABETA is COMPLEX On entry, BETA specifies the scalar beta.YY is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCY ) ). Before entry, the incremented array Y must contain the vector y. On exit, Y is overwritten by the updated vector y.INCYINCY is INTEGER On entry, INCY specifies the increment for the elements of Y. INCY must not be zero.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. The vector and matrix arguments are not referenced when N = 0, or M = 0 -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 188 of file chbmv.f.subroutine chemv (character UPLO, integer N, complex ALPHA, complex,dimension(lda,*) A, integer LDA, complex, dimension(*) X, integer INCX,complex BETA, complex, dimension(*) Y, integer INCY)CHEMVPurpose:CHEMV performs the matrix-vector operation y := alpha*A*x + beta*y, where alpha and beta are scalars, x and y are n element vectors and A is an n by n hermitian matrix.ParametersUPLOUPLO is CHARACTER*1 On entry, UPLO specifies whether the upper or lower triangular part of the array A is to be referenced as follows: UPLO = 'U' or 'u' Only the upper triangular part of A is to be referenced. UPLO = 'L' or 'l' Only the lower triangular part of A is to be referenced.NN is INTEGER On entry, N specifies the order of the matrix A. N must be at least zero.ALPHAALPHA is COMPLEX On entry, ALPHA specifies the scalar alpha.AA is COMPLEX array, dimension ( LDA, N ) Before entry with UPLO = 'U' or 'u', the leading n by n upper triangular part of the array A must contain the upper triangular part of the hermitian matrix and the strictly lower triangular part of A is not referenced. Before entry with UPLO = 'L' or 'l', the leading n by n lower triangular part of the array A must contain the lower triangular part of the hermitian matrix and the strictly upper triangular part of A is not referenced. Note that the imaginary parts of the diagonal elements need not be set and are assumed to be zero.LDALDA is INTEGER On entry, LDA specifies the first dimension of A as declared in the calling (sub) program. LDA must be at least max( 1, n ).XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the n element vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.BETABETA is COMPLEX On entry, BETA specifies the scalar beta. When BETA is supplied as zero then Y need not be set on input.YY is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCY ) ). Before entry, the incremented array Y must contain the n element vector y. On exit, Y is overwritten by the updated vector y.INCYINCY is INTEGER On entry, INCY specifies the increment for the elements of Y. INCY must not be zero.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. The vector and matrix arguments are not referenced when N = 0, or M = 0 -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 155 of file chemv.f.subroutine cher (character UPLO, integer N, real ALPHA, complex,dimension(*) X, integer INCX, complex, dimension(lda,*) A, integer LDA)CHERPurpose:CHER performs the hermitian rank 1 operation A := alpha*x*x**H + A, where alpha is a real scalar, x is an n element vector and A is an n by n hermitian matrix.ParametersUPLOUPLO is CHARACTER*1 On entry, UPLO specifies whether the upper or lower triangular part of the array A is to be referenced as follows: UPLO = 'U' or 'u' Only the upper triangular part of A is to be referenced. UPLO = 'L' or 'l' Only the lower triangular part of A is to be referenced.NN is INTEGER On entry, N specifies the order of the matrix A. N must be at least zero.ALPHAALPHA is REAL On entry, ALPHA specifies the scalar alpha.XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the n element vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.AA is COMPLEX array, dimension ( LDA, N ) Before entry with UPLO = 'U' or 'u', the leading n by n upper triangular part of the array A must contain the upper triangular part of the hermitian matrix and the strictly lower triangular part of A is not referenced. On exit, the upper triangular part of the array A is overwritten by the upper triangular part of the updated matrix. Before entry with UPLO = 'L' or 'l', the leading n by n lower triangular part of the array A must contain the lower triangular part of the hermitian matrix and the strictly upper triangular part of A is not referenced. On exit, the lower triangular part of the array A is overwritten by the lower triangular part of the updated matrix. Note that the imaginary parts of the diagonal elements need not be set, they are assumed to be zero, and on exit they are set to zero.LDALDA is INTEGER On entry, LDA specifies the first dimension of A as declared in the calling (sub) program. LDA must be at least max( 1, n ).AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 136 of file cher.f.subroutine cher2 (character UPLO, integer N, complex ALPHA, complex,dimension(*) X, integer INCX, complex, dimension(*) Y, integer INCY,complex, dimension(lda,*) A, integer LDA)CHER2Purpose:CHER2 performs the hermitian rank 2 operation A := alpha*x*y**H + conjg( alpha )*y*x**H + A, where alpha is a scalar, x and y are n element vectors and A is an n by n hermitian matrix.ParametersUPLOUPLO is CHARACTER*1 On entry, UPLO specifies whether the upper or lower triangular part of the array A is to be referenced as follows: UPLO = 'U' or 'u' Only the upper triangular part of A is to be referenced. UPLO = 'L' or 'l' Only the lower triangular part of A is to be referenced.NN is INTEGER On entry, N specifies the order of the matrix A. N must be at least zero.ALPHAALPHA is COMPLEX On entry, ALPHA specifies the scalar alpha.XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the n element vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.YY is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCY ) ). Before entry, the incremented array Y must contain the n element vector y.INCYINCY is INTEGER On entry, INCY specifies the increment for the elements of Y. INCY must not be zero.AA is COMPLEX array, dimension ( LDA, N ) Before entry with UPLO = 'U' or 'u', the leading n by n upper triangular part of the array A must contain the upper triangular part of the hermitian matrix and the strictly lower triangular part of A is not referenced. On exit, the upper triangular part of the array A is overwritten by the upper triangular part of the updated matrix. Before entry with UPLO = 'L' or 'l', the leading n by n lower triangular part of the array A must contain the lower triangular part of the hermitian matrix and the strictly upper triangular part of A is not referenced. On exit, the lower triangular part of the array A is overwritten by the lower triangular part of the updated matrix. Note that the imaginary parts of the diagonal elements need not be set, they are assumed to be zero, and on exit they are set to zero.LDALDA is INTEGER On entry, LDA specifies the first dimension of A as declared in the calling (sub) program. LDA must be at least max( 1, n ).AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 151 of file cher2.f.subroutine chpmv (character UPLO, integer N, complex ALPHA, complex,dimension(*) AP, complex, dimension(*) X, integer INCX, complex BETA,complex, dimension(*) Y, integer INCY)CHPMVPurpose:CHPMV performs the matrix-vector operation y := alpha*A*x + beta*y, where alpha and beta are scalars, x and y are n element vectors and A is an n by n hermitian matrix, supplied in packed form.ParametersUPLOUPLO is CHARACTER*1 On entry, UPLO specifies whether the upper or lower triangular part of the matrix A is supplied in the packed array AP as follows: UPLO = 'U' or 'u' The upper triangular part of A is supplied in AP. UPLO = 'L' or 'l' The lower triangular part of A is supplied in AP.NN is INTEGER On entry, N specifies the order of the matrix A. N must be at least zero.ALPHAALPHA is COMPLEX On entry, ALPHA specifies the scalar alpha.APAP is COMPLEX array, dimension at least ( ( n*( n + 1 ) )/2 ). Before entry with UPLO = 'U' or 'u', the array AP must contain the upper triangular part of the hermitian matrix packed sequentially, column by column, so that AP( 1 ) contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 1, 2 ) and a( 2, 2 ) respectively, and so on. Before entry with UPLO = 'L' or 'l', the array AP must contain the lower triangular part of the hermitian matrix packed sequentially, column by column, so that AP( 1 ) contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 2, 1 ) and a( 3, 1 ) respectively, and so on. Note that the imaginary parts of the diagonal elements need not be set and are assumed to be zero.XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the n element vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.BETABETA is COMPLEX On entry, BETA specifies the scalar beta. When BETA is supplied as zero then Y need not be set on input.YY is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCY ) ). Before entry, the incremented array Y must contain the n element vector y. On exit, Y is overwritten by the updated vector y.INCYINCY is INTEGER On entry, INCY specifies the increment for the elements of Y. INCY must not be zero.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. The vector and matrix arguments are not referenced when N = 0, or M = 0 -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 150 of file chpmv.f.subroutine chpr (character UPLO, integer N, real ALPHA, complex,dimension(*) X, integer INCX, complex, dimension(*) AP)CHPRPurpose:CHPR performs the hermitian rank 1 operation A := alpha*x*x**H + A, where alpha is a real scalar, x is an n element vector and A is an n by n hermitian matrix, supplied in packed form.ParametersUPLOUPLO is CHARACTER*1 On entry, UPLO specifies whether the upper or lower triangular part of the matrix A is supplied in the packed array AP as follows: UPLO = 'U' or 'u' The upper triangular part of A is supplied in AP. UPLO = 'L' or 'l' The lower triangular part of A is supplied in AP.NN is INTEGER On entry, N specifies the order of the matrix A. N must be at least zero.ALPHAALPHA is REAL On entry, ALPHA specifies the scalar alpha.XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the n element vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.APAP is COMPLEX array, dimension at least ( ( n*( n + 1 ) )/2 ). Before entry with UPLO = 'U' or 'u', the array AP must contain the upper triangular part of the hermitian matrix packed sequentially, column by column, so that AP( 1 ) contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 1, 2 ) and a( 2, 2 ) respectively, and so on. On exit, the array AP is overwritten by the upper triangular part of the updated matrix. Before entry with UPLO = 'L' or 'l', the array AP must contain the lower triangular part of the hermitian matrix packed sequentially, column by column, so that AP( 1 ) contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 2, 1 ) and a( 3, 1 ) respectively, and so on. On exit, the array AP is overwritten by the lower triangular part of the updated matrix. Note that the imaginary parts of the diagonal elements need not be set, they are assumed to be zero, and on exit they are set to zero.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 131 of file chpr.f.subroutine chpr2 (character UPLO, integer N, complex ALPHA, complex,dimension(*) X, integer INCX, complex, dimension(*) Y, integer INCY,complex, dimension(*) AP)CHPR2Purpose:CHPR2 performs the hermitian rank 2 operation A := alpha*x*y**H + conjg( alpha )*y*x**H + A, where alpha is a scalar, x and y are n element vectors and A is an n by n hermitian matrix, supplied in packed form.ParametersUPLOUPLO is CHARACTER*1 On entry, UPLO specifies whether the upper or lower triangular part of the matrix A is supplied in the packed array AP as follows: UPLO = 'U' or 'u' The upper triangular part of A is supplied in AP. UPLO = 'L' or 'l' The lower triangular part of A is supplied in AP.NN is INTEGER On entry, N specifies the order of the matrix A. N must be at least zero.ALPHAALPHA is COMPLEX On entry, ALPHA specifies the scalar alpha.XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the n element vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.YY is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCY ) ). Before entry, the incremented array Y must contain the n element vector y.INCYINCY is INTEGER On entry, INCY specifies the increment for the elements of Y. INCY must not be zero.APAP is COMPLEX array, dimension at least ( ( n*( n + 1 ) )/2 ). Before entry with UPLO = 'U' or 'u', the array AP must contain the upper triangular part of the hermitian matrix packed sequentially, column by column, so that AP( 1 ) contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 1, 2 ) and a( 2, 2 ) respectively, and so on. On exit, the array AP is overwritten by the upper triangular part of the updated matrix. Before entry with UPLO = 'L' or 'l', the array AP must contain the lower triangular part of the hermitian matrix packed sequentially, column by column, so that AP( 1 ) contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 2, 1 ) and a( 3, 1 ) respectively, and so on. On exit, the array AP is overwritten by the lower triangular part of the updated matrix. Note that the imaginary parts of the diagonal elements need not be set, they are assumed to be zero, and on exit they are set to zero.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 146 of file chpr2.f.subroutine ctbmv (character UPLO, character TRANS, character DIAG, integerN, integer K, complex, dimension(lda,*) A, integer LDA, complex,dimension(*) X, integer INCX)CTBMVPurpose:CTBMV performs one of the matrix-vector operations x := A*x, or x := A**T*x, or x := A**H*x, where x is an n element vector and A is an n by n unit, or non-unit, upper or lower triangular band matrix, with ( k + 1 ) diagonals.ParametersUPLOUPLO is CHARACTER*1 On entry, UPLO specifies whether the matrix is an upper or lower triangular matrix as follows: UPLO = 'U' or 'u' A is an upper triangular matrix. UPLO = 'L' or 'l' A is a lower triangular matrix.TRANSTRANS is CHARACTER*1 On entry, TRANS specifies the operation to be performed as follows: TRANS = 'N' or 'n' x := A*x. TRANS = 'T' or 't' x := A**T*x. TRANS = 'C' or 'c' x := A**H*x.DIAGDIAG is CHARACTER*1 On entry, DIAG specifies whether or not A is unit triangular as follows: DIAG = 'U' or 'u' A is assumed to be unit triangular. DIAG = 'N' or 'n' A is not assumed to be unit triangular.NN is INTEGER On entry, N specifies the order of the matrix A. N must be at least zero.KK is INTEGER On entry with UPLO = 'U' or 'u', K specifies the number of super-diagonals of the matrix A. On entry with UPLO = 'L' or 'l', K specifies the number of sub-diagonals of the matrix A. K must satisfy 0 .le. K.AA is COMPLEX array, dimension ( LDA, N ). Before entry with UPLO = 'U' or 'u', the leading ( k + 1 ) by n part of the array A must contain the upper triangular band part of the matrix of coefficients, supplied column by column, with the leading diagonal of the matrix in row ( k + 1 ) of the array, the first super-diagonal starting at position 2 in row k, and so on. The top left k by k triangle of the array A is not referenced. The following program segment will transfer an upper triangular band matrix from conventional full matrix storage to band storage: DO 20, J = 1, N M = K + 1 - J DO 10, I = MAX( 1, J - K ), J A( M + I, J ) = matrix( I, J ) 10 CONTINUE 20 CONTINUE Before entry with UPLO = 'L' or 'l', the leading ( k + 1 ) by n part of the array A must contain the lower triangular band part of the matrix of coefficients, supplied column by column, with the leading diagonal of the matrix in row 1 of the array, the first sub-diagonal starting at position 1 in row 2, and so on. The bottom right k by k triangle of the array A is not referenced. The following program segment will transfer a lower triangular band matrix from conventional full matrix storage to band storage: DO 20, J = 1, N M = 1 - J DO 10, I = J, MIN( N, J + K ) A( M + I, J ) = matrix( I, J ) 10 CONTINUE 20 CONTINUE Note that when DIAG = 'U' or 'u' the elements of the array A corresponding to the diagonal elements of the matrix are not referenced, but are assumed to be unity.LDALDA is INTEGER On entry, LDA specifies the first dimension of A as declared in the calling (sub) program. LDA must be at least ( k + 1 ).XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the n element vector x. On exit, X is overwritten with the transformed vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. The vector and matrix arguments are not referenced when N = 0, or M = 0 -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 187 of file ctbmv.f.subroutine ctbsv (character UPLO, character TRANS, character DIAG, integerN, integer K, complex, dimension(lda,*) A, integer LDA, complex,dimension(*) X, integer INCX)CTBSVPurpose:CTBSV solves one of the systems of equations A*x = b, or A**T*x = b, or A**H*x = b, where b and x are n element vectors and A is an n by n unit, or non-unit, upper or lower triangular band matrix, with ( k + 1 ) diagonals. No test for singularity or near-singularity is included in this routine. Such tests must be performed before calling this routine.ParametersUPLOUPLO is CHARACTER*1 On entry, UPLO specifies whether the matrix is an upper or lower triangular matrix as follows: UPLO = 'U' or 'u' A is an upper triangular matrix. UPLO = 'L' or 'l' A is a lower triangular matrix.TRANSTRANS is CHARACTER*1 On entry, TRANS specifies the equations to be solved as follows: TRANS = 'N' or 'n' A*x = b. TRANS = 'T' or 't' A**T*x = b. TRANS = 'C' or 'c' A**H*x = b.DIAGDIAG is CHARACTER*1 On entry, DIAG specifies whether or not A is unit triangular as follows: DIAG = 'U' or 'u' A is assumed to be unit triangular. DIAG = 'N' or 'n' A is not assumed to be unit triangular.NN is INTEGER On entry, N specifies the order of the matrix A. N must be at least zero.KK is INTEGER On entry with UPLO = 'U' or 'u', K specifies the number of super-diagonals of the matrix A. On entry with UPLO = 'L' or 'l', K specifies the number of sub-diagonals of the matrix A. K must satisfy 0 .le. K.AA is COMPLEX array, dimension ( LDA, N ) Before entry with UPLO = 'U' or 'u', the leading ( k + 1 ) by n part of the array A must contain the upper triangular band part of the matrix of coefficients, supplied column by column, with the leading diagonal of the matrix in row ( k + 1 ) of the array, the first super-diagonal starting at position 2 in row k, and so on. The top left k by k triangle of the array A is not referenced. The following program segment will transfer an upper triangular band matrix from conventional full matrix storage to band storage: DO 20, J = 1, N M = K + 1 - J DO 10, I = MAX( 1, J - K ), J A( M + I, J ) = matrix( I, J ) 10 CONTINUE 20 CONTINUE Before entry with UPLO = 'L' or 'l', the leading ( k + 1 ) by n part of the array A must contain the lower triangular band part of the matrix of coefficients, supplied column by column, with the leading diagonal of the matrix in row 1 of the array, the first sub-diagonal starting at position 1 in row 2, and so on. The bottom right k by k triangle of the array A is not referenced. The following program segment will transfer a lower triangular band matrix from conventional full matrix storage to band storage: DO 20, J = 1, N M = 1 - J DO 10, I = J, MIN( N, J + K ) A( M + I, J ) = matrix( I, J ) 10 CONTINUE 20 CONTINUE Note that when DIAG = 'U' or 'u' the elements of the array A corresponding to the diagonal elements of the matrix are not referenced, but are assumed to be unity.LDALDA is INTEGER On entry, LDA specifies the first dimension of A as declared in the calling (sub) program. LDA must be at least ( k + 1 ).XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the n element right-hand side vector b. On exit, X is overwritten with the solution vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 190 of file ctbsv.f.subroutine ctpmv (character UPLO, character TRANS, character DIAG, integerN, complex, dimension(*) AP, complex, dimension(*) X, integer INCX)CTPMVPurpose:CTPMV performs one of the matrix-vector operations x := A*x, or x := A**T*x, or x := A**H*x, where x is an n element vector and A is an n by n unit, or non-unit, upper or lower triangular matrix, supplied in packed form.ParametersUPLOUPLO is CHARACTER*1 On entry, UPLO specifies whether the matrix is an upper or lower triangular matrix as follows: UPLO = 'U' or 'u' A is an upper triangular matrix. UPLO = 'L' or 'l' A is a lower triangular matrix.TRANSTRANS is CHARACTER*1 On entry, TRANS specifies the operation to be performed as follows: TRANS = 'N' or 'n' x := A*x. TRANS = 'T' or 't' x := A**T*x. TRANS = 'C' or 'c' x := A**H*x.DIAGDIAG is CHARACTER*1 On entry, DIAG specifies whether or not A is unit triangular as follows: DIAG = 'U' or 'u' A is assumed to be unit triangular. DIAG = 'N' or 'n' A is not assumed to be unit triangular.NN is INTEGER On entry, N specifies the order of the matrix A. N must be at least zero.APAP is COMPLEX array, dimension at least ( ( n*( n + 1 ) )/2 ). Before entry with UPLO = 'U' or 'u', the array AP must contain the upper triangular matrix packed sequentially, column by column, so that AP( 1 ) contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 1, 2 ) and a( 2, 2 ) respectively, and so on. Before entry with UPLO = 'L' or 'l', the array AP must contain the lower triangular matrix packed sequentially, column by column, so that AP( 1 ) contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 2, 1 ) and a( 3, 1 ) respectively, and so on. Note that when DIAG = 'U' or 'u', the diagonal elements of A are not referenced, but are assumed to be unity.XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the n element vector x. On exit, X is overwritten with the transformed vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. The vector and matrix arguments are not referenced when N = 0, or M = 0 -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 143 of file ctpmv.f.subroutine ctpsv (character UPLO, character TRANS, character DIAG, integerN, complex, dimension(*) AP, complex, dimension(*) X, integer INCX)CTPSVPurpose:CTPSV solves one of the systems of equations A*x = b, or A**T*x = b, or A**H*x = b, where b and x are n element vectors and A is an n by n unit, or non-unit, upper or lower triangular matrix, supplied in packed form. No test for singularity or near-singularity is included in this routine. Such tests must be performed before calling this routine.ParametersUPLOUPLO is CHARACTER*1 On entry, UPLO specifies whether the matrix is an upper or lower triangular matrix as follows: UPLO = 'U' or 'u' A is an upper triangular matrix. UPLO = 'L' or 'l' A is a lower triangular matrix.TRANSTRANS is CHARACTER*1 On entry, TRANS specifies the equations to be solved as follows: TRANS = 'N' or 'n' A*x = b. TRANS = 'T' or 't' A**T*x = b. TRANS = 'C' or 'c' A**H*x = b.DIAGDIAG is CHARACTER*1 On entry, DIAG specifies whether or not A is unit triangular as follows: DIAG = 'U' or 'u' A is assumed to be unit triangular. DIAG = 'N' or 'n' A is not assumed to be unit triangular.NN is INTEGER On entry, N specifies the order of the matrix A. N must be at least zero.APAP is COMPLEX array, dimension at least ( ( n*( n + 1 ) )/2 ). Before entry with UPLO = 'U' or 'u', the array AP must contain the upper triangular matrix packed sequentially, column by column, so that AP( 1 ) contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 1, 2 ) and a( 2, 2 ) respectively, and so on. Before entry with UPLO = 'L' or 'l', the array AP must contain the lower triangular matrix packed sequentially, column by column, so that AP( 1 ) contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 2, 1 ) and a( 3, 1 ) respectively, and so on. Note that when DIAG = 'U' or 'u', the diagonal elements of A are not referenced, but are assumed to be unity.XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the n element right-hand side vector b. On exit, X is overwritten with the solution vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 145 of file ctpsv.f.subroutine ctrmv (character UPLO, character TRANS, character DIAG, integerN, complex, dimension(lda,*) A, integer LDA, complex, dimension(*) X,integer INCX)CTRMVPurpose:CTRMV performs one of the matrix-vector operations x := A*x, or x := A**T*x, or x := A**H*x, where x is an n element vector and A is an n by n unit, or non-unit, upper or lower triangular matrix.ParametersUPLOUPLO is CHARACTER*1 On entry, UPLO specifies whether the matrix is an upper or lower triangular matrix as follows: UPLO = 'U' or 'u' A is an upper triangular matrix. UPLO = 'L' or 'l' A is a lower triangular matrix.TRANSTRANS is CHARACTER*1 On entry, TRANS specifies the operation to be performed as follows: TRANS = 'N' or 'n' x := A*x. TRANS = 'T' or 't' x := A**T*x. TRANS = 'C' or 'c' x := A**H*x.DIAGDIAG is CHARACTER*1 On entry, DIAG specifies whether or not A is unit triangular as follows: DIAG = 'U' or 'u' A is assumed to be unit triangular. DIAG = 'N' or 'n' A is not assumed to be unit triangular.NN is INTEGER On entry, N specifies the order of the matrix A. N must be at least zero.AA is COMPLEX array, dimension ( LDA, N ). Before entry with UPLO = 'U' or 'u', the leading n by n upper triangular part of the array A must contain the upper triangular matrix and the strictly lower triangular part of A is not referenced. Before entry with UPLO = 'L' or 'l', the leading n by n lower triangular part of the array A must contain the lower triangular matrix and the strictly upper triangular part of A is not referenced. Note that when DIAG = 'U' or 'u', the diagonal elements of A are not referenced either, but are assumed to be unity.LDALDA is INTEGER On entry, LDA specifies the first dimension of A as declared in the calling (sub) program. LDA must be at least max( 1, n ).XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the n element vector x. On exit, X is overwritten with the transformed vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. The vector and matrix arguments are not referenced when N = 0, or M = 0 -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 148 of file ctrmv.f.subroutine ctrsv (character UPLO, character TRANS, character DIAG, integerN, complex, dimension(lda,*) A, integer LDA, complex, dimension(*) X,integer INCX)CTRSVPurpose:CTRSV solves one of the systems of equations A*x = b, or A**T*x = b, or A**H*x = b, where b and x are n element vectors and A is an n by n unit, or non-unit, upper or lower triangular matrix. No test for singularity or near-singularity is included in this routine. Such tests must be performed before calling this routine.ParametersUPLOUPLO is CHARACTER*1 On entry, UPLO specifies whether the matrix is an upper or lower triangular matrix as follows: UPLO = 'U' or 'u' A is an upper triangular matrix. UPLO = 'L' or 'l' A is a lower triangular matrix.TRANSTRANS is CHARACTER*1 On entry, TRANS specifies the equations to be solved as follows: TRANS = 'N' or 'n' A*x = b. TRANS = 'T' or 't' A**T*x = b. TRANS = 'C' or 'c' A**H*x = b.DIAGDIAG is CHARACTER*1 On entry, DIAG specifies whether or not A is unit triangular as follows: DIAG = 'U' or 'u' A is assumed to be unit triangular. DIAG = 'N' or 'n' A is not assumed to be unit triangular.NN is INTEGER On entry, N specifies the order of the matrix A. N must be at least zero.AA is COMPLEX array, dimension ( LDA, N ) Before entry with UPLO = 'U' or 'u', the leading n by n upper triangular part of the array A must contain the upper triangular matrix and the strictly lower triangular part of A is not referenced. Before entry with UPLO = 'L' or 'l', the leading n by n lower triangular part of the array A must contain the lower triangular matrix and the strictly upper triangular part of A is not referenced. Note that when DIAG = 'U' or 'u', the diagonal elements of A are not referenced either, but are assumed to be unity.LDALDA is INTEGER On entry, LDA specifies the first dimension of A as declared in the calling (sub) program. LDA must be at least max( 1, n ).XX is COMPLEX array, dimension at least ( 1 + ( n - 1 )*abs( INCX ) ). Before entry, the incremented array X must contain the n element right-hand side vector b. On exit, X is overwritten with the solution vector x.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016Further Details:Level 2 Blas routine. -- Written on 22-October-1986. Jack Dongarra, Argonne National Lab. Jeremy Du Croz, Nag Central Office. Sven Hammarling, Nag Central Office. Richard Hanson, Sandia National Labs. Definition at line 150 of file ctrsv.f. Author Generated automatically by Doxygen for LAPACK from the source code. Version 3.9.0 Sat May 16 2020 complex_blas_level2(3)