envy24control

envy24control(1)                                                envy24control(1)



NAME
       envy24control - GUI control tool for Envy24 (ice1712) based soundcards,
       under ALSA.


SYNOPSIS
       envy24control [-c card-number] [-D control-name] [-o 0-num DACs max 8]
       [-i 0-num ADCs max 8] [-p 0-8] [-s 0-2] [-f <profiles file name>] [-v]
       [<profile number>|<profile name>] [-m midi-channel] [-M] [-w
       window-width] [-t 0-9]


DESCRIPTION
       envy24control allows control of the digital mixer, channel gains and
       other hardware settings for sound cards based on the ice1712 chipset
       (Midiman Delta series, Terratec EWS and EWX series). It also displays a
       level meter for each input and output channel.


INVOKING
       envy24control [-c card-number] [-D control-name] [-o 0-num DACs max 8]
       [-i 0-num ADCs max 8] [-p 0-8] [-s 0-2] [-f <profiles file name>] [-v]
       [<profile number>|<profile name>] [-m midi-channel] [-M] [-w
       window-width] [-t 0-9]

       If no control-name is given, then the first sound card is used.


   Options
       -c card-number
              Use the card specified by card-number rather than the first card.
              This is equivalent with -Dhw:n option where n is the card number.

       -D control-name
              Use the card specified by control-name rather than the first card,
              normally this will be of the form hw:n where n is the sound card
              number (zero-based). This is only needed if you have more than one
              Envy24-based card or if your Envy24 card is not configured as the
              first card in your ALSA driver setup.

       -o outputs
              Limit number of analog line outputs to display.  Default is the
              number of DACs in the driver specification. Maximum is 8.  The
              number of analog output lines can only be reduced from the
              available number of output lines.

       -i inputs
              Limit number of analog line inputs to display.  Default is the
              number of ADCs in the driver specification. Maximum is 8.  The
              number of analog input lines can only be reduced from the
              available number of input lines.

       -p pcm outputs
              Limit number of PCM outputs to display.  Default is 8.

       -s spdif inputs/outputs
              Limit number of SPDIF inputs/outputs to display.  Default is 2.

       -f name and path of the profiles file name.
              From/to this file will envy24control read/write the alsactl
              settings.  If is not given DEFAULT_PROFILERC or for restore if
              DEFAULT_PROFILERC doesn't exists SYS_PROFILERC will be used.

       -v view spdif playback channels in the mixer.
              It is not possible to manage something (muting, volume levels).
              It is only to view the levelmeters.  Default is no view of spdif
              playback channels in the mixer.

       -m midi-channel
              Use MIDI controller values to control the Faders in the mixer
              view.  The application will react to controllers on channel
              midi-channel and send controllers on this channel when the user
              moves the GUI sliders.

       -M     Use an enhanced mapping from midi controller values to db sliders.

       -w window-width
              Specify the initial width of the envy24control window.  Using
              window-width in the range 0-20 specifies approx number of mixer
              channels visible.  Values >20 are interpreted as screen pixels.

       -t tall-equal mixer heights
              Using -t 1 enlarges the channel mixers to the same height as the
              digital mixer.  With values >1 the height of all mixers is
              increased in stages.  -t 0 is the default, set for minimum window
              height.

SEE ALSO
        alsamixer(1), amixer(1), gamix(1)


AUTHOR
       envy24control is  by Jaroslav Kysela <perex@perex.cz> This document is by
       James Tappin <james@xena.uklinux.net>.  Updated by Dirk Kalis
       <dirk.kalis@t-online.de>.  Options-w and -t added Alan Horstmann
       <gineera@aspect135.co.uk>



                                  30 July 2005                  envy24control(1)