fpit

FPIT(4)                     Kernel Interfaces Manual                     FPIT(4)



NAME
       fpit - Fujitsu Stylistic input driver

SYNOPSIS
       Section "InputDevice"
         Identifier "idevname"
         Driver "fpit"
         Option "Device"   "devpath"
         ...
       EndSection

DESCRIPTION
       fpit is an Xorg input driver for Fujitsu Stylistic Tablet PCs.

       The fpit driver functions as a pointer input device, and may be used as
       the X server's core pointer.

SUPPORTED HARDWARE
       This driver supports the touchscreen of the Stylistic LT and (with
       special options) of the Stylistic 500, 1000, 1200, 2300, and 3400.
       Modern FinePoint MP800 devices will also work with this driver.

       Under Linux the Fujitsu's serial port is not, by default, detected.
       Therefore the port must be configured manually as described in the
       accompanying readme.txt file.

       For example, add the following to your startup scripts for Stylistic xx00
       devices:


       setserial /dev/ttyS3 autoconfig

       setserial /dev/ttyS3 IRQ 15 baud_base 115200 port 0xfce8

       This driver now supports Stylistic 3400 (and possibly other passive-pen
       systems) with a special "Passive" paramter. Try this serial configuration
       for the 3400:


       setserial /dev/ttyS3 autoconfig

       setserial /dev/ttyS3 uart 16450 irq 5 port 0xfd68


CONFIGURATION DETAILS
       Please refer to xorg.conf(5x) for general configuration details and for
       options that can be used with all input drivers.  This section only
       covers configuration details specific to this driver.

       The device supports the following options:

               Option "MaximumXPosition" "number"
                   Sets the maximum X position, use this to calibrate your
                   touchscreen's right hand edge.

               Option "MinimumXPosition" "number"
                   Sets the minimum X position, use this to calibrate your
                   touchscreen's left hand edge.

               Option "MaximumYPosition" "number"

               Option "MinimumYPosition" "number"
                   Same as for X axis, but for Y axis.

               Option "InvertX"

               Option "InvertY"
                   Invert the specified axis.

               Option "SwapXY"
                   Swap the X and Y axis (after inversions).

               Option "Rotate" "CW"
                   Option "Rotate" "CWW" Manipulate the invert and swap options
                   to match screen rotations. (Will behave strangely if combined
                   with invert or swap options.)  New users should consider the
                   "TrackRandR" option instead.

               Option "DeviceName" "name"
                   Option "DeviceName" "name" sets the name of the X device.

               Option "AlwaysCore" "on"
                   enables the sharing of the core pointer. When this feature is
                   enabled, the device will take control of the core pointer
                   (and thus will emit core events) and at the same time will be
                   able, when asked so, to report extended events.  You can use
                   the last available integer feedback to control this feature.
                   When the value of the feedback is zero, the feature is
                   disabled. The feature is enabled for any other value.

               Option "DebugLevel" number
                   sets the level of debugging info reported.

               Option "BaudRate" "38400", "19200" (default) or "9600"
                   changes the serial link speed.

               Option "Passive"
                   decodes the passive pen.  Option "TrackRandR" automatically
                   keeps the cursor synchronized with the pen's position, even
                   when the screen is resized or rotated. (Recommended for
                   tablet PC's.)

       Example, for Stylistic LT setup is:
       Section "InputDevice"
         Identifier "mouse0"
         Driver "fpit"
         Option "Device"   "/dev/ttyS3"
         # Option "TrackRandR"
       EndSection

       And for other Stylistic devices try:
       Section "InputDevice"
         Identifier "mouse0"
         Driver "fpit"
         Option "Device"   "/dev/ttyS3"
         Option "BaudRate" "19200"
         Option "MaximumXPosition" "6250"
         Option "MaximumYPosition" "4950"
         Option "MinimumXPosition" "130"
         Option "MinimumYPosition" "0"
         Option "InvertY"
         # Option "TrackRandR"
       EndSection

       For Stylistic 3400:
       Section "InputDevice"
         Identifier "mouse0"
         Driver "fpit"
         Option "Device"   "/dev/ttyS3"
         Option "BaudRate" "9600"
         Option "MaximumXPosition" "4070"
         Option "MaximumYPosition" "4020"
         Option "MinimumXPosition" "0"
         Option "MinimumYPosition" "0"
         Option "Passive"
         Option "SendCoreEvents"
         # Option "TrackRandR"
       EndSection


SEE ALSO
       Xorg(1), xorg.conf(5), Xserver(1), X(7).

AUTHORS
       Original FPIT port: Rob Tsuk <rob@tsuk.com> and John Apfelbaum
       <johnapf@linuxslate.com>

       X4 Port: Richard Miller-Smith <richard.miller-smith@philips.com>, based
       on Elographics code from: Patrick Lecoanet

       X4.2 Cleanup: Alan Cox



X Version 11                  xf86-input-fpit 1.4.0                      FPIT(4)