gethostbyaddr

GETHOSTBYNAME(3)           Linux Programmer's Manual          GETHOSTBYNAME(3)



NAME
       gethostbyname, gethostbyaddr, sethostent, gethostent, endhostent,
       h_errno, herror, hstrerror, gethostbyaddr_r, gethostbyname2,
       gethostbyname2_r, gethostbyname_r, gethostent_r - get network host
       entry

SYNOPSIS
       #include <netdb.h>
       extern int h_errno;

       struct hostent *gethostbyname(const char *name);

       #include <sys/socket.h>       /* for AF_INET */
       struct hostent *gethostbyaddr(const void *addr,
                                     socklen_t len, int type);

       void sethostent(int stayopen);

       void endhostent(void);

       void herror(const char *s);

       const char *hstrerror(int err);

       /* System V/POSIX extension */
       struct hostent *gethostent(void);

       /* GNU extensions */
       struct hostent *gethostbyname2(const char *name, int af);

       int gethostent_r(
               struct hostent *ret, char *buf, size_t buflen,
               struct hostent **result, int *h_errnop);

       int gethostbyaddr_r(const void *addr, socklen_t len, int type,
               struct hostent *ret, char *buf, size_t buflen,
               struct hostent **result, int *h_errnop);

       int gethostbyname_r(const char *name,
               struct hostent *ret, char *buf, size_t buflen,
               struct hostent **result, int *h_errnop);

       int gethostbyname2_r(const char *name, int af,
               struct hostent *ret, char *buf, size_t buflen,
               struct hostent **result, int *h_errnop);

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       gethostbyname2(), gethostent_r(), gethostbyaddr_r(), gethostbyname_r(),
       gethostbyname2_r():
           Since glibc 2.19:
               _DEFAULT_SOURCE
           Glibc versions up to and including 2.19:
               _BSD_SOURCE || _SVID_SOURCE

       herror(), hstrerror():
           Since glibc 2.19:
               _DEFAULT_SOURCE
           Glibc 2.8 to 2.19:
               _BSD_SOURCE || _SVID_SOURCE
           Before glibc 2.8:
               none

       h_errno:
           Since glibc 2.19
               _DEFAULT_SOURCE || _POSIX_C_SOURCE < 200809L
           Glibc 2.12 to 2.19:
               _BSD_SOURCE || _SVID_SOURCE || _POSIX_C_SOURCE < 200809L
           Before glibc 2.12:
               none

DESCRIPTION
       The gethostbyname*(), gethostbyaddr*(), herror(), and hstrerror()
       functions are obsolete.  Applications should use getaddrinfo(3),
       getnameinfo(3), and gai_strerror(3) instead.

       The gethostbyname() function returns a structure of type hostent for
       the given host name.  Here name is either a hostname or an IPv4 address
       in standard dot notation (as for inet_addr(3)).  If name is an IPv4
       address, no lookup is performed and gethostbyname() simply copies name
       into the h_name field and its struct in_addr equivalent into the
       h_addr_list[0] field of the returned hostent structure.  If name
       doesn't end in a dot and the environment variable HOSTALIASES is set,
       the alias file pointed to by HOSTALIASES will first be searched for
       name (see hostname(7) for the file format).  The current domain and its
       parents are searched unless name ends in a dot.

       The gethostbyaddr() function returns a structure of type hostent for
       the given host address addr of length len and address type type.  Valid
       address types are AF_INET and AF_INET6.  The host address argument is a
       pointer to a struct of a type depending on the address type, for
       example a struct in_addr * (probably obtained via a call to
       inet_addr(3)) for address type AF_INET.

       The sethostent() function specifies, if stayopen is true (1), that a
       connected TCP socket should be used for the name server queries and
       that the connection should remain open during successive queries.
       Otherwise, name server queries will use UDP datagrams.

       The endhostent() function ends the use of a TCP connection for name
       server queries.

       The (obsolete) herror() function prints the error message associated
       with the current value of h_errno on stderr.

       The (obsolete) hstrerror() function takes an error number (typically
       h_errno) and returns the corresponding message string.

       The domain name queries carried out by gethostbyname() and
       gethostbyaddr() rely on the Name Service Switch (nsswitch.conf(5))
       configured sources or a local name server (named(8)).  The default
       action is to query the Name Service Switch (nsswitch.conf(5))
       configured sources, failing that, a local name server (named(8)).

   Historical
       The nsswitch.conf(5) file is the modern way of controlling the order of
       host lookups.

       In glibc 2.4 and earlier, the order keyword was used to control the
       order of host lookups as defined in /etc/host.conf (host.conf(5)).

       The hostent structure is defined in <netdb.h> as follows:

           struct hostent {
               char  *h_name;            /* official name of host */
               char **h_aliases;         /* alias list */
               int    h_addrtype;        /* host address type */
               int    h_length;          /* length of address */
               char **h_addr_list;       /* list of addresses */
           }
           #define h_addr h_addr_list[0] /* for backward compatibility */

       The members of the hostent structure are:

       h_name The official name of the host.

       h_aliases
              An array of alternative names for the host, terminated by a null
              pointer.

       h_addrtype
              The type of address; always AF_INET or AF_INET6 at present.

       h_length
              The length of the address in bytes.

       h_addr_list
              An array of pointers to network addresses for the host (in
              network byte order), terminated by a null pointer.

       h_addr The first address in h_addr_list for backward compatibility.

RETURN VALUE
       The gethostbyname() and gethostbyaddr() functions return the hostent
       structure or a null pointer if an error occurs.  On error, the h_errno
       variable holds an error number.  When non-NULL, the return value may
       point at static data, see the notes below.

ERRORS
       The variable h_errno can have the following values:

       HOST_NOT_FOUND
              The specified host is unknown.

       NO_DATA
              The requested name is valid but does not have an IP address.
              Another type of request to the name server for this domain may
              return an answer.  The constant NO_ADDRESS is a synonym for
              NO_DATA.

       NO_RECOVERY
              A nonrecoverable name server error occurred.

       TRY_AGAIN
              A temporary error occurred on an authoritative name server.  Try
              again later.

FILES
       /etc/host.conf
              resolver configuration file

       /etc/hosts
              host database file

       /etc/nsswitch.conf
              name service switch configuration

ATTRIBUTES
       For an explanation of the terms used in this section, see
       attributes(7).

       ┌───────────────────┬───────────────┬───────────────────────────────┐
       │Interface          Attribute     Value                         │
       ├───────────────────┼───────────────┼───────────────────────────────┤
       │gethostbyname()    │ Thread safety │ MT-Unsafe race:hostbyname env │
       │                   │               │ locale                        │
       ├───────────────────┼───────────────┼───────────────────────────────┤
       │gethostbyaddr()    │ Thread safety │ MT-Unsafe race:hostbyaddr env │
       │                   │               │ locale                        │
       ├───────────────────┼───────────────┼───────────────────────────────┤
       │sethostent(),      │ Thread safety │ MT-Unsafe race:hostent env    │
       │endhostent(),      │               │ locale                        │
       │gethostent_r()     │               │                               │
       ├───────────────────┼───────────────┼───────────────────────────────┤
       │herror(),          │ Thread safety │ MT-Safe                       │
       │hstrerror()        │               │                               │
       ├───────────────────┼───────────────┼───────────────────────────────┤
       │gethostent()       │ Thread safety │ MT-Unsafe race:hostent        │
       │                   │               │ race:hostentbuf env locale    │
       ├───────────────────┼───────────────┼───────────────────────────────┤
       │gethostbyname2()   │ Thread safety │ MT-Unsafe race:hostbyname2    │
       │                   │               │ env locale                    │
       ├───────────────────┼───────────────┼───────────────────────────────┤
       │gethostbyaddr_r(), │ Thread safety │ MT-Safe env locale            │
       │gethostbyname_r(), │               │                               │
       │gethostbyname2_r() │               │                               │
       └───────────────────┴───────────────┴───────────────────────────────┘
       In the above table, hostent in race:hostent signifies that if any of
       the functions sethostent(), gethostent(), gethostent_r(), or
       endhostent() are used in parallel in different threads of a program,
       then data races could occur.

CONFORMING TO
       POSIX.1-2001 specifies gethostbyname(), gethostbyaddr(), sethostent(),
       endhostent(), gethostent(), and h_errno; gethostbyname(),
       gethostbyaddr(), and h_errno are marked obsolescent in that standard.
       POSIX.1-2008 removes the specifications of gethostbyname(),
       gethostbyaddr(), and h_errno, recommending the use of getaddrinfo(3)
       and getnameinfo(3) instead.

NOTES
       The functions gethostbyname() and gethostbyaddr() may return pointers
       to static data, which may be overwritten by later calls.  Copying the
       struct hostent does not suffice, since it contains pointers; a deep
       copy is required.

       In the original BSD implementation the len argument of gethostbyname()
       was an int.  The SUSv2 standard is buggy and declares the len argument
       of gethostbyaddr() to be of type size_t.  (That is wrong, because it
       has to be int, and size_t is not.  POSIX.1-2001 makes it socklen_t,
       which is OK.)  See also accept(2).

       The BSD prototype for gethostbyaddr() uses const char * for the first
       argument.

   System V/POSIX extension
       POSIX requires the gethostent() call, which should return the next
       entry in the host data base.  When using DNS/BIND this does not make
       much sense, but it may be reasonable if the host data base is a file
       that can be read line by line.  On many systems, a routine of this name
       reads from the file /etc/hosts.  It may be available only when the
       library was built without DNS support.  The glibc version will ignore
       ipv6 entries.  This function is not reentrant, and glibc adds a
       reentrant version gethostent_r().

   GNU extensions
       Glibc2 also has a gethostbyname2() that works like gethostbyname(), but
       permits to specify the address family to which the address must belong.

       Glibc2 also has reentrant versions gethostent_r(), gethostbyaddr_r(),
       gethostbyname_r() and gethostbyname2_r().  The caller supplies a
       hostent structure ret which will be filled in on success, and a
       temporary work buffer buf of size buflen.  After the call, result will
       point to the result on success.  In case of an error or if no entry is
       found result will be NULL.  The functions return 0 on success and a
       nonzero error number on failure.  In addition to the errors returned by
       the nonreentrant versions of these functions, if buf is too small, the
       functions will return ERANGE, and the call should be retried with a
       larger buffer.  The global variable h_errno is not modified, but the
       address of a variable in which to store error numbers is passed in
       h_errnop.

BUGS
       gethostbyname() does not recognize components of a dotted IPv4 address
       string that are expressed in hexadecimal.

SEE ALSO
       getaddrinfo(3), getnameinfo(3), inet(3), inet_ntop(3), inet_pton(3),
       resolver(3), hosts(5), nsswitch.conf(5), hostname(7), named(8)

COLOPHON
       This page is part of release 4.16 of the Linux man-pages project.  A
       description of the project, information about reporting bugs, and the
       latest version of this page, can be found at
       https://www.kernel.org/doc/man-pages/.




                                  2017-09-15                  GETHOSTBYNAME(3)