gimprc

GIMPRC(5)                     File Formats Manual                    GIMPRC(5)



NAME
       gimprc - gimp configuration file

DESCRIPTION
       The gimprc file is a configuration file read by GIMP when it starts up.
       There are two of these: one system-wide one stored in
       /etc/gimp/2.0/gimprc and a per-user $XDG_CONFIG_HOME/GIMP/2.10/gimprc
       which may override system settings.

       Comments are introduced by a hash sign (#), and continue until the end
       of the line.  Blank lines are ignored.

       The gimprc file associates values with properties.  These properties
       may be set by lisp-like assignments of the form:

              (property-name value)

       where:

       property-name
                 is one of the property names described below.

       value     is the value the property is to be set to.

       Either spaces or tabs may be used to separate the name from the value.

PROPERTIES
       Valid properties and their default values are:


       (temp-path "${gimp_temp_dir}")

              Sets the folder for temporary storage. Files will appear here
              during the course of running GIMP.  Most files will disappear
              when GIMP exits, but some files are likely to remain, so it is
              best if this folder not be one that is shared by other users.
              This is a single folder.


       (swap-path "${gimp_cache_dir}")

              Sets the swap file location. GIMP uses a tile based memory
              allocation scheme.  The swap file is used to quickly and easily
              swap tiles out to disk and back in. Be aware that the swap file
              can easily get very large if GIMP is used with large images.
              Also, things can get horribly slow if the swap file is created
              on a folder that is mounted over NFS.  For these reasons, it may
              be desirable to put your swap file in "/tmp".  This is a single
              folder.


       (swap-compression "fast")

              The compression method used for tile data stored in the swap
              file.  This is a string value.


       (num-processors 1)

              Sets how many threads GIMP should use for operations that
              support it.  This is an integer value.


       (tile-cache-size 2g)

              When the amount of pixel data exceeds this limit, GIMP will
              start to swap tiles to disk.  This is a lot slower but it makes
              it possible to work on images that wouldn't fit into memory
              otherwise.  If you have a lot of RAM, you may want to set this
              to a higher value.  The integer size can contain a suffix of
              'B', 'K', 'M' or 'G' which makes GIMP interpret the size as
              being specified in bytes, kilobytes, megabytes or gigabytes. If
              no suffix is specified the size defaults to being specified in
              kilobytes.


       (use-opencl no)

              When enabled, uses OpenCL for some operations.  Possible values
              are yes and no.



       Specifies the language to use for the user interface.  This is a string
       value.


       (interpolation-type cubic)

              Sets the level of interpolation used for scaling and other
              transformations.  Possible values are none, linear, cubic,
              nohalo and lohalo.


       (default-threshold 15)

              Tools such as fuzzy-select and bucket fill find regions based on
              a seed-fill algorithm.  The seed fill starts at the initially
              selected pixel and progresses in all directions until the
              difference of pixel intensity from the original is greater than
              a specified threshold. This value represents the default
              threshold.  This is an integer value.


       (plug-in-path "${gimp_dir}/plug-ins:${gimp_plug_in_dir}/plug-ins")

              Sets the plug-in search path.  This is a colon-separated list of
              folders to search.


       (module-path "${gimp_dir}/modules:${gimp_plug_in_dir}/modules")

              Sets the module search path.  This is a colon-separated list of
              folders to search.


       (interpreter-path
       "${gimp_dir}/interpreters:${gimp_plug_in_dir}/interpreters")

              Sets the interpreter search path.  This is a colon-separated
              list of folders to search.


       (environ-path "${gimp_dir}/environ:${gimp_plug_in_dir}/environ")

              Sets the environ search path.  This is a colon-separated list of
              folders to search.


       (brush-path "${gimp_dir}/brushes:${gimp_data_dir}/brushes")

              Sets the brush search path.  This is a colon-separated list of
              folders to search.


       (brush-path-writable "${gimp_dir}/brushes")

              This is a colon-separated list of folders to search.


       (dynamics-path "${gimp_dir}/dynamics:${gimp_data_dir}/dynamics")

              Sets the dynamics search path.  This is a colon-separated list
              of folders to search.


       (dynamics-path-writable "${gimp_dir}/dynamics")

              This is a colon-separated list of folders to search.


       (mypaint-brush-path "/usr/share/mypaint-
       data/1.0/brushes:~/.mypaint/brushes")

              Sets the brush search path.  This is a colon-separated list of
              folders to search.


       (mypaint-brush-path-writable "~/.mypaint/brushes")

              This is a colon-separated list of folders to search.


       (pattern-path "${gimp_dir}/patterns:${gimp_data_dir}/patterns")

              Sets the pattern search path.  This is a colon-separated list of
              folders to search.


       (pattern-path-writable "${gimp_dir}/patterns")

              This is a colon-separated list of folders to search.


       (palette-path "${gimp_dir}/palettes:${gimp_data_dir}/palettes")

              Sets the palette search path.  This is a colon-separated list of
              folders to search.


       (palette-path-writable "${gimp_dir}/palettes")

              This is a colon-separated list of folders to search.


       (gradient-path "${gimp_dir}/gradients:${gimp_data_dir}/gradients")

              Sets the gradient search path.  This is a colon-separated list
              of folders to search.


       (gradient-path-writable "${gimp_dir}/gradients")

              This is a colon-separated list of folders to search.


       (tool-preset-path "${gimp_dir}/tool-presets:${gimp_data_dir}/tool-
       presets")

              Sets the dynamics search path.  This is a colon-separated list
              of folders to search.


       (tool-preset-path-writable "${gimp_dir}/tool-presets")

              This is a colon-separated list of folders to search.


       (font-path "${gimp_dir}/fonts:${gimp_data_dir}/fonts")

              Where to look for fonts in addition to the system-wide installed
              fonts.  This is a colon-separated list of folders to search.


       (default-brush "2. Hardness 050")

              Specify a default brush.  The brush is searched for in the
              specified brush path.  This is a string value.


       (default-dynamics "Dynamics Off")

              Specify a default dynamics.  The dynamics is searched for in the
              specified dynamics path.  This is a string value.


       (default-mypaint-brush "Fixme")

              Specify a default MyPaint brush.  This is a string value.


       (default-pattern "Pine")

              Specify a default pattern.  This is a string value.


       (default-palette "Default")

              Specify a default palette.  This is a string value.


       (default-gradient "FG to BG (RGB)")

              Specify a default gradient.  This is a string value.


       (default-tool-preset "Current Options")

              Specify a default tool preset.  The tool preset is searched for
              in the specified tool prests path.  This is a string value.


       (default-font "Sans-serif")

              Specify a default font.  This is a string value.


       (global-brush yes)

              When enabled, the selected brush will be used for all tools.
              Possible values are yes and no.


       (global-dynamics yes)

              When enabled, the selected dynamics will be used for all tools.
              Possible values are yes and no.


       (global-pattern yes)

              When enabled, the selected pattern will be used for all tools.
              Possible values are yes and no.


       (global-palette yes)

              When enabled, the selected palette will be used for all tools.
              Possible values are yes and no.


       (global-gradient yes)

              When enabled, the selected gradient will be used for all tools.
              Possible values are yes and no.


       (global-font yes)

              When enabled, the selected font will be used for all tools.
              Possible values are yes and no.


       (default-image
                  (width 1920)
                  (height 1080)
                  (unit pixels)
                  (xresolution 300)
                  (yresolution 300)
                  (resolution-unit inches)
                  (image-type rgb)
                  (precision u8-gamma)
                  (color-managed yes)
                  (color-profile NULL)
                  (fill-type background)
                  (comment "Created with GIMP"))

              Sets the default image in the "File/New" dialog.  This is a
              parameter list.


       (default-grid
                  (style solid)
                  (fgcolor (color-rgba 0 0 0 1))
                  (bgcolor (color-rgba 1 1 1 1))
                  (xspacing 10)
                  (yspacing 10)
                  (spacing-unit inches)
                  (xoffset 0)
                  (yoffset 0)
                  (offset-unit inches))

              Specify a default image grid.  This is a parameter list.


       (undo-levels 5)

              Sets the minimal number of operations that can be undone. More
              undo levels are kept available until the undo-size limit is
              reached.  This is an integer value.


       (undo-size 1g)

              Sets an upper limit to the memory that is used per image to keep
              operations on the undo stack. Regardless of this setting, at
              least as many undo-levels as configured can be undone.  The
              integer size can contain a suffix of 'B', 'K', 'M' or 'G' which
              makes GIMP interpret the size as being specified in bytes,
              kilobytes, megabytes or gigabytes. If no suffix is specified the
              size defaults to being specified in kilobytes.


       (undo-preview-size large)

              Sets the size of the previews in the Undo History.  Possible
              values are tiny, extra-small, small, medium, large, extra-large,
              huge, enormous and gigantic.


       (plug-in-history-size 10)

              How many recently used filters and plug-ins to keep on the
              Filters menu.  This is an integer value.


       (pluginrc-path "${gimp_dir}/pluginrc")

              Sets the pluginrc search path.  This is a single filename.


       (layer-previews yes)

              Sets whether GIMP should create previews of layers and channels.
              Previews in the layers and channels dialog are nice to have but
              they can slow things down when working with large images.
              Possible values are yes and no.


       (group-layer-previews yes)

              Sets whether GIMP should create previews of layer groups. Layer
              group previews are more expensive than ordinary layer previews.
              Possible values are yes and no.


       (layer-preview-size medium)

              Sets the preview size used for layers and channel previews in
              newly created dialogs.  Possible values are tiny, extra-small,
              small, medium, large, extra-large, huge, enormous and gigantic.


       (thumbnail-size normal)

              Sets the size of the thumbnail shown in the Open dialog.
              Possible values are none, normal and large.


       (thumbnail-filesize-limit 4M)

              The thumbnail in the Open dialog will be automatically updated
              if the file being previewed is smaller than the size set here.
              The integer size can contain a suffix of 'B', 'K', 'M' or 'G'
              which makes GIMP interpret the size as being specified in bytes,
              kilobytes, megabytes or gigabytes. If no suffix is specified the
              size defaults to being specified in kilobytes.


       (color-management
                  (mode display)
                  (display-profile-from-gdk no)
                  (display-rendering-intent relative-colorimetric)
                  (display-use-black-point-compensation yes)
                  (display-optimize yes)
                  (simulation-rendering-intent perceptual)
                  (simulation-use-black-point-compensation no)
                  (simulation-optimize yes)
                  (simulation-gamut-check no)
                  (out-of-gamut-color (color-rgb 1 0 1))
                  (display-module "CdisplayLcms"))

              Defines the color management behavior.  This is a parameter
              list.


       (save-document-history yes)

              Keep a permanent record of all opened and saved files in the
              Recent Documents list.  Possible values are yes and no.


       (quick-mask-color (color-rgba 1 0 0 0.5))

              Sets the default quick mask color.  The color is specified in
              the form (color-rgba red green blue alpha) with channel values
              as floats in the range of 0.0 to 1.0.


       (import-promote-float no)

              Promote imported images to floating point precision. Does not
              apply to indexed images.  Possible values are yes and no.


       (import-promote-dither yes)

              When promoting imported images to floating point precision, also
              add minimal noise in order to distribute color values a bit.
              Possible values are yes and no.


       (import-add-alpha no)

              Add an alpha channel to all layers of imported images.  Possible
              values are yes and no.


       (import-raw-plug-in "")

              Which plug-in to use for importing raw digital camera files.
              This is a single filename.


       (export-file-type png)

              Export file type used by default.  Possible values are png, jpg,
              ora, psd, pdf, tif, bmp and webp.


       (export-color-profile yes)

              Export the image's color profile by default.  Possible values
              are yes and no.


       (export-metadata-exif yes)

              Export Exif metadata by default.  Possible values are yes and
              no.


       (export-metadata-xmp yes)

              Export XMP metadata by default.  Possible values are yes and no.


       (export-metadata-iptc yes)

              Export IPTC metadata by default.  Possible values are yes and
              no.


       (debug-policy fatal)

              Try generating debug data for bug reporting when appropriate.
              Possible values are warning, critical, fatal and never.


       (check-updates yes)

              Check for availability of GIMP updates through background
              internet queries.  Possible values are yes and no.


       (check-update-timestamp 0)

              Timestamp of the last update check.  (null)


       (last-release-timestamp 0)

              The timestamp for the last known release date.  (null)



       The last known release version of GIMP as queried from official
       website.  This
              is a string value.


       (last-revision 0)

              The timestamp for the last known release date.  This is an
              integer value.



       The last known release version of GIMP as queried from official
       website.  This
              is a string value.


       (transparency-size medium-checks)

              Sets the size of the checkerboard used to display transparency.
              Possible values are small-checks, medium-checks and large-
              checks.


       (transparency-type gray-checks)

              Sets the manner in which transparency is displayed in images.
              Possible values are light-checks, gray-checks, dark-checks,
              white-only, gray-only and black-only.


       (snap-distance 8)

              This is the distance in pixels where Guide and Grid snapping
              activates.  This is an integer value.


       (marching-ants-speed 200)

              Speed of marching ants in the selection outline.  This value is
              in milliseconds (less time indicates faster marching).  This is
              an integer value.


       (resize-windows-on-zoom no)

              When enabled, the image window will automatically resize itself
              when zooming into and out of images. This setting only takes
              effect in multi-window mode.  Possible values are yes and no.


       (resize-windows-on-resize no)

              When enabled, the image window will automatically resize itself
              whenever the physical image size changes. This setting only
              takes effect in multi-window mode.  Possible values are yes and
              no.


       (default-show-all no)

              Show full image content by default.  Possible values are yes and
              no.


       (default-dot-for-dot yes)

              When enabled, this will ensure that each pixel of an image gets
              mapped to a pixel on the screen.  Possible values are yes and
              no.


       (initial-zoom-to-fit yes)

              When enabled, this will ensure that the full image is visible
              after a file is opened, otherwise it will be displayed with a
              scale of 1:1.  Possible values are yes and no.


       (cursor-mode tool-crosshair)

              Sets the type of mouse pointers to use.  Possible values are
              tool-icon, tool-crosshair and crosshair.


       (cursor-updating yes)

              Context-dependent mouse pointers are helpful.  They are enabled
              by default.  However, they require overhead that you may want to
              do without.  Possible values are yes and no.


       (show-brush-outline yes)

              When enabled, all paint tools will show a preview of the current
              brush's outline.  Possible values are yes and no.


       (snap-brush-outline no)

              When enabled, the brush outline will snap to individual dabs
              while painting.  Possible values are yes and no.


       (show-paint-tool-cursor yes)

              When enabled, the mouse pointer will be shown over the image
              while using a paint tool.  Possible values are yes and no.


       (image-title-format "%D*%f-%p.%i (%t, %o, %L) %wx%h")

              Sets the text to appear in image window titles.  This is a
              format string; certain % character sequences are recognised and
              expanded as follows:

              %%  literal percent sign
              %f  bare filename, or "Untitled"
              %F  full path to file, or "Untitled"
              %p  PDB image id
              %i  view instance number
              %t  image type (RGB, grayscale, indexed)
              %z  zoom factor as a percentage
              %s  source scale factor
              %d  destination scale factor
              %Dx expands to x if the image is dirty, the empty string
              otherwise
              %Cx expands to x if the image is clean, the empty string
              otherwise
              %B  expands to (modified) if the image is dirty, the empty
              string otherwise
              %A  expands to (clean) if the image is clean, the empty string
              otherwise
              %Nx expands to x if the image is export-dirty, the empty string
              otherwise
              %Ex expands to x if the image is export-clean, the empty string
              otherwise
              %l  the number of layers
              %L  the number of layers (long form)
              %m  memory used by the image
              %n  the name of the active layer/channel
              %P  the PDB id of the active layer/channel
              %w  image width in pixels
              %W  image width in real-world units
              %h  image height in pixels
              %H  image height in real-world units
              %M  the image size expressed in megapixels
              %u  unit symbol
              %U  unit abbreviation
              %x  the width of the active layer/channel in pixels
              %X  the width of the active layer/channel in real-world units
              %y  the height of the active layer/channel in pixels
              %Y  the height of the active layer/channel in real-world units
              %o  the name of the image's color profile



       (image-status-format "%n (%m)")

              Sets the text to appear in image window status bars.  This is a
              format string; certain % character sequences are recognised and
              expanded as follows:

              %%  literal percent sign
              %f  bare filename, or "Untitled"
              %F  full path to file, or "Untitled"
              %p  PDB image id
              %i  view instance number
              %t  image type (RGB, grayscale, indexed)
              %z  zoom factor as a percentage
              %s  source scale factor
              %d  destination scale factor
              %Dx expands to x if the image is dirty, the empty string
              otherwise
              %Cx expands to x if the image is clean, the empty string
              otherwise
              %B  expands to (modified) if the image is dirty, the empty
              string otherwise
              %A  expands to (clean) if the image is clean, the empty string
              otherwise
              %Nx expands to x if the image is export-dirty, the empty string
              otherwise
              %Ex expands to x if the image is export-clean, the empty string
              otherwise
              %l  the number of layers
              %L  the number of layers (long form)
              %m  memory used by the image
              %n  the name of the active layer/channel
              %P  the PDB id of the active layer/channel
              %w  image width in pixels
              %W  image width in real-world units
              %h  image height in pixels
              %H  image height in real-world units
              %M  the image size expressed in megapixels
              %u  unit symbol
              %U  unit abbreviation
              %x  the width of the active layer/channel in pixels
              %X  the width of the active layer/channel in real-world units
              %y  the height of the active layer/channel in pixels
              %Y  the height of the active layer/channel in real-world units
              %o  the name of the image's color profile



       (monitor-xresolution 96)

              Sets the monitor's horizontal resolution, in dots per inch.  If
              set to 0, forces the X server to be queried for both horizontal
              and vertical resolution information.  This is a float value.


       (monitor-yresolution 96)

              Sets the monitor's vertical resolution, in dots per inch.  If
              set to 0, forces the X server to be queried for both horizontal
              and vertical resolution information.  This is a float value.


       (monitor-resolution-from-windowing-system yes)

              When enabled, GIMP will use the monitor resolution from the
              windowing system.  Possible values are yes and no.


       (navigation-preview-size medium)

              Sets the size of the navigation preview available in the lower
              right corner of the image window.  Possible values are tiny,
              extra-small, small, medium, large, extra-large, huge, enormous
              and gigantic.


       (default-view
                  (show-menubar yes)
                  (show-statusbar yes)
                  (show-rulers yes)
                  (show-scrollbars yes)
                  (show-selection yes)
                  (show-layer-boundary yes)
                  (show-canvas-boundary yes)
                  (show-guides yes)
                  (show-grid no)
                  (show-sample-points yes)
                  (snap-to-guides yes)
                  (snap-to-grid no)
                  (snap-to-canvas no)
                  (snap-to-path no)
                  (padding-mode default)
                  (padding-color (color-rgb 1 1 1))
                  (padding-in-show-all no))

              Sets the default settings for the image view.  This is a
              parameter list.


       (default-fullscreen-view
                  (show-menubar yes)
                  (show-statusbar yes)
                  (show-rulers yes)
                  (show-scrollbars yes)
                  (show-selection yes)
                  (show-layer-boundary yes)
                  (show-canvas-boundary yes)
                  (show-guides yes)
                  (show-grid no)
                  (show-sample-points yes)
                  (snap-to-guides yes)
                  (snap-to-grid no)
                  (snap-to-canvas no)
                  (snap-to-path no)
                  (padding-mode default)
                  (padding-color (color-rgb 1 1 1))
                  (padding-in-show-all no))

              Sets the default settings used when an image is viewed in
              fullscreen mode.  This is a parameter list.


       (activate-on-focus yes)

              When enabled, an image will become the active image when its
              image window receives the focus. This is useful for window
              managers using "click to focus".
               Possible values are yes and no.


       (space-bar-action pan)

              What to do when the space bar is pressed in the image window.
              Possible values are none, pan and move.


       (zoom-quality high)

              There's a tradeoff between speed and quality of the zoomed-out
              display.  Possible values are low and high.


       (use-event-history no)

              Bugs in event history buffer are frequent so in case of cursor
              offset problems turning it off helps.  Possible values are yes
              and no.


       (edit-non-visible no)

              When enabled, non-visible layers can be edited as normal.
              Possible values are yes and no.


       (move-tool-changes-active no)

              If enabled, the move tool sets the edited layer or path as
              active.  This used to be the default behaviour in older
              versions.  Possible values are yes and no.


       (filter-tool-max-recent 10)

              How many recent settings to keep around in filter tools.  This
              is an integer value.


       (filter-tool-use-last-settings no)

              Default to the last used settings in filter tools.  Possible
              values are yes and no.


       (filter-tool-show-color-options no)

              Show advanced color options in filter tools.  Possible values
              are yes and no.


       (trust-dirty-flag no)

              When enabled, GIMP will not save an image if it has not been
              changed since it was opened.  Possible values are yes and no.


       (save-device-status yes)

              Remember the current tool, pattern, color, and brush across GIMP
              sessions.  Possible values are yes and no.


       (devices-share-tool no)

              When enabled, the same tool and tool options will be used for
              all input devices. No tool switching will occur when the input
              device changes.  Possible values are yes and no.


       (save-session-info yes)

              Save the positions and sizes of the main dialogs when GIMP
              exits.  Possible values are yes and no.


       (restore-session yes)

              Let GIMP try to restore your last saved session on each startup.
              Possible values are yes and no.


       (restore-monitor no)

              When enabled, GIMP will try to restore windows on the monitor
              they were open before.  When disabled, windows will appear on
              the currently used monitor.  Possible values are yes and no.


       (save-tool-options yes)

              Save the tool options when GIMP exits.  Possible values are yes
              and no.


       (compact-sliders yes)

              Use compact style for sliders.  Possible values are yes and no.


       (show-tooltips yes)

              Show a tooltip when the pointer hovers over an item.  Possible
              values are yes and no.


       (tearoff-menus yes)

              When enabled, menus can be torn off.  Possible values are yes
              and no.


       (can-change-accels no)

              When enabled, you can change keyboard shortcuts for menu items
              by hitting a key combination while the menu item is highlighted.
              Possible values are yes and no.


       (save-accels yes)

              Save changed keyboard shortcuts when GIMP exits.  Possible
              values are yes and no.


       (restore-accels yes)

              Restore saved keyboard shortcuts on each GIMP startup.  Possible
              values are yes and no.


       (last-opened-size 10)

              How many recently opened image filenames to keep on the File
              menu.  This is an integer value.


       (max-new-image-size 128M)

              GIMP will warn the user if an attempt is made to create an image
              that would take more memory than the size specified here.  The
              integer size can contain a suffix of 'B', 'K', 'M' or 'G' which
              makes GIMP interpret the size as being specified in bytes,
              kilobytes, megabytes or gigabytes. If no suffix is specified the
              size defaults to being specified in kilobytes.


       (toolbox-color-area yes)

              Show the current foreground and background colors in the
              toolbox.  Possible values are yes and no.


       (toolbox-foo-area no)

              Show the currently selected brush, pattern and gradient in the
              toolbox.  Possible values are yes and no.


       (toolbox-image-area no)

              Show the currently active image in the toolbox.  Possible values
              are yes and no.


       (toolbox-wilber yes)

              Show the GIMP mascot at the top of the toolbox.  Possible values
              are yes and no.


       (toolbox-groups yes)

              Use a single toolbox button for grouped tools.  Possible values
              are yes and no.


       (toolbox-group-menu-mode hover-single-column)

              Menu mode of grouped tools.  Possible values are click, hover
              and hover-single-column.


       (theme-path "${gimp_dir}/themes:${gimp_data_dir}/themes")

              Sets the theme search path.  This is a colon-separated list of
              folders to search.


       (theme "Dark")

              The name of the theme to use.  This is a string value.


       (icon-theme-path "${gimp_dir}/icons:${gimp_data_dir}/icons")

              Sets the icon theme search path.  This is a colon-separated list
              of folders to search.


       (icon-theme "Symbolic")

              The name of the icon theme to use.  This is a string value.


       (icon-size auto)

              The size of the icons to use.  Possible values are auto, theme,
              small, medium, large and huge.


       (use-help yes)

              When enabled, pressing F1 will open the help browser.  Possible
              values are yes and no.


       (show-help-button yes)

              When enabled, dialogs will show a help button that gives access
              to the related help page.  Without this button, the help page
              can still be reached by pressing F1.  Possible values are yes
              and no.


       (help-locales "")

              Specifies the language preferences used by the help system. This
              is a colon-separated list of language identifiers with
              decreasing priority. If empty, the language is taken from the
              user's locale setting.  This is a string value.


       (help-browser gimp)

              Sets the browser used by the help system.  Possible values are
              gimp and web-browser.


       (search-show-unavailable-actions no)

              When enabled, a search of actions will also return inactive
              actions.  Possible values are yes and no.


       (action-history-size 100)

              The maximum number of actions saved in history.  This is an
              integer value.


       (user-manual-online no)

              When enabled, the online user manual will be used by the help
              system.  Otherwise the locally installed copy is used.  Possible
              values are yes and no.


       (user-manual-online-uri "https://docs.gimp.org/2.10")

              The location of the online user manual. This is used if 'user-
              manual-online' is enabled.  This is a string value.


       (dock-window-hint utility)

              The window type hint that is set on dock windows and the toolbox
              window. This may affect the way your window manager decorates
              and handles these windows.  Possible values are normal, utility
              and keep-above.


       (cursor-handedness right)

              Sets the handedness for cursor positioning.  Possible values are
              left and right.


       (playground-npd-tool no)

              Enable the N-Point Deformation tool.  Possible values are yes
              and no.


       (playground-seamless-clone-tool no)

              Enable the Seamless Clone tool.  Possible values are yes and no.


       (color-profile-policy ask)

              How to handle embedded color profiles when opening a file.
              Possible values are ask, keep and convert.



       Sets the default folder path for all color profile file dialogs.  This
       is a
              single filename.


       (image-convert-profile-intent relative-colorimetric)

              Sets the default rendering intent for the 'Convert to Color
              Profile' dialog.  Possible values are perceptual, relative-
              colorimetric, saturation and absolute-colorimetric.


       (image-convert-profile-black-point-compensation yes)

              Sets the default 'Black Point Compensation' state for the
              'Convert to Color Profile' dialog.  Possible values are yes and
              no.


       (image-convert-precision-layer-dither-method none)

              Sets the default layer dithering method for the 'Convert
              Precision' dialog.  Possible values are none, floyd-steinberg,
              bayer, random, random-covariant, add, add-covariant, xor and
              xor-covariant.


       (image-convert-precision-text-layer-dither-method none)

              Sets the default text layer dithering method for the 'Convert
              Precision' dialog.  Possible values are none, floyd-steinberg,
              bayer, random, random-covariant, add, add-covariant, xor and
              xor-covariant.


       (image-convert-precision-channel-dither-method none)

              Sets the default channel dithering method for the 'Convert
              Precision' dialog.  Possible values are none, floyd-steinberg,
              bayer, random, random-covariant, add, add-covariant, xor and
              xor-covariant.


       (image-convert-indexed-palette-type generate)

              Sets the default palette type for the 'Convert to Indexed'
              dialog.  Possible values are generate, web, mono and custom.


       (image-convert-indexed-max-colors 256)

              Sets the default maximum number of colors for the 'Convert to
              Indexed' dialog.
               This is an integer value.


       (image-convert-indexed-remove-duplicates yes)

              Sets the default 'Remove duplicate colors' state for the
              'Convert to Indexed' dialog.  Possible values are yes and no.


       (image-convert-indexed-dither-type none)

              Sets the default dithering type for the 'Convert to Indexed'
              dialog.  Possible values are none, fs, fs-lowbleed and fixed.


       (image-convert-indexed-dither-alpha no)

              Sets the default 'Dither alpha' state for the 'Convert to
              Indexed' dialog.  Possible values are yes and no.


       (image-convert-indexed-dither-text-layers no)

              Sets the default 'Dither text layers' state for the 'Convert to
              Indexed' dialog.  Possible values are yes and no.


       (image-resize-fill-type transparent)

              Sets the default fill type for the 'Canvas Size' dialog.
              Possible values are foreground, background, white, transparent
              and pattern.


       (image-resize-layer-set none)

              Sets the default set of layers to resize for the 'Canvas Size'
              dialog.  Possible values are none, all, image-sized, visible and
              linked.


       (image-resize-resize-text-layers no)

              Sets the default 'Resize text layers' state for the 'Canvas
              Size' dialog.  Possible values are yes and no.


       (layer-new-name "Layer")

              Sets the default layer name for the 'New Layer' dialog.  This is
              a string value.


       (layer-new-mode normal)

              Sets the default mode for the 'New Layer' dialog.  Possible
              values are normal-legacy, dissolve, behind-legacy, multiply-
              legacy, screen-legacy, overlay-legacy, difference-legacy,
              addition-legacy, subtract-legacy, darken-only-legacy, lighten-
              only-legacy, hsv-hue-legacy, hsv-saturation-legacy, hsl-color-
              legacy, hsv-value-legacy, divide-legacy, dodge-legacy, burn-
              legacy, hardlight-legacy, softlight-legacy, grain-extract-
              legacy, grain-merge-legacy, color-erase-legacy, overlay, lch-
              hue, lch-chroma, lch-color, lch-lightness, normal, behind,
              multiply, screen, difference, addition, subtract, darken-only,
              lighten-only, hsv-hue, hsv-saturation, hsl-color, hsv-value,
              divide, dodge, burn, hardlight, softlight, grain-extract, grain-
              merge, vivid-light, pin-light, linear-light, hard-mix,
              exclusion, linear-burn, luma-darken-only, luma-lighten-only,
              luminance, color-erase, erase, merge, split, pass-through,
              replace and anti-erase.


       (layer-new-blend-space auto)

              Sets the default blend space for the 'New Layer' dialog.
              Possible values are auto, rgb-linear, rgb-perceptual and lab.


       (layer-new-composite-space auto)

              Sets the default composite space for the 'New Layer' dialog.
              Possible values are auto, rgb-linear, rgb-perceptual and lab.


       (layer-new-composite-mode auto)

              Sets the default composite mode for the 'New Layer' dialog.
              Possible values are auto, union, clip-to-backdrop, clip-to-layer
              and intersection.


       (layer-new-opacity 1)

              Sets the default opacity for the 'New Layer' dialog.  This is a
              float value.


       (layer-new-fill-type transparent)

              Sets the default fill type for the 'New Layer' dialog.  Possible
              values are foreground, background, white, transparent and
              pattern.


       (layer-resize-fill-type transparent)

              Sets the default fill type for the 'Layer Boundary Size' dialog.
              Possible values are foreground, background, white, transparent
              and pattern.


       (layer-add-mask-type white)

              Sets the default mask for the 'Add Layer Mask' dialog.  Possible
              values are white, black, alpha, alpha-transfer, selection, copy
              and channel.


       (layer-add-mask-invert no)

              Sets the default 'invert mask' state for the 'Add Layer Mask'
              dialog.  Possible values are yes and no.


       (layer-merge-type expand-as-necessary)

              Sets the default merge type for the 'Merge Visible Layers'
              dialog.  Possible values are expand-as-necessary, clip-to-image,
              clip-to-bottom-layer and flatten-image.


       (layer-merge-active-group-only yes)

              Sets the default 'Active group only' for the 'Merge Visible
              Layers' dialog.  Possible values are yes and no.


       (layer-merge-discard-invisible no)

              Sets the default 'Discard invisible' for the 'Merge Visible
              Layers' dialog.  Possible values are yes and no.


       (channel-new-name "Channel")

              Sets the default channel name for the 'New Channel' dialog.
              This is a string value.


       (channel-new-color (color-rgba 0 0 0 0.5))

              Sets the default color and opacity for the 'New Channel' dialog.
              The color is specified in the form (color-rgba red green blue
              alpha) with channel values as floats in the range of 0.0 to 1.0.


       (path-new-name "Path")

              Sets the default path name for the 'New Path' dialog.  This is a
              string value.



       Sets the default folder path for the 'Export Path' dialog.  This is a
       single
              filename.


       (path-export-active-only yes)

              Sets the default 'Export the active path' state for the 'Export
              Path' dialog.  Possible values are yes and no.



       Sets the default folder path for the 'Import Path' dialog.  This is a
       single
              filename.


       (path-import-merge no)

              Sets the default 'Merge imported paths' state for the 'Import
              Path' dialog.  Possible values are yes and no.


       (path-import-scale no)

              Sets the default 'Scale imported paths to fit size' state for
              the 'Import Path' dialog.  Possible values are yes and no.


       (selection-feather-radius 5)

              Sets the default feather radius for the 'Feather Selection'
              dialog.  This is a float value.


       (selection-feather-edge-lock yes)

              Sets the default 'Selected areas continue outside the image'
              setting for the 'Feather Selection' dialog.  Possible values are
              yes and no.


       (selection-grow-radius 1)

              Sets the default grow radius for the 'Grow Selection' dialog.
              This is a float value.


       (selection-shrink-radius 1)

              Sets the default shrink radius for the 'Shrink Selection'
              dialog.  This is a float value.


       (selection-shrink-edge-lock no)

              Sets the default 'Selected areas continue outside the image'
              setting for the 'Shrink Selection' dialog.  Possible values are
              yes and no.


       (selection-border-radius 5)

              Sets the default border radius for the 'Border Selection'
              dialog.  This is a float value.


       (selection-border-style smooth)

              Sets the default border style for the 'Border Selection' dialog.
              Possible values are hard, smooth and feathered.


       (selection-border-edge-lock no)

              Sets the default 'Selected areas continue outside the image'
              setting for the 'Border Selection' dialog.  Possible values are
              yes and no.


       (fill-options
                  (style solid)
                  (antialias yes)
                  (feather no)
                  (feather-radius 10))

              The default fill options for the fill dialogs.  This is a
              parameter list.


       (stroke-options
                  (style solid)
                  (antialias yes)
                  (feather no)
                  (feather-radius 10)
                  (method line)
                  (width 6)
                  (unit pixels)
                  (cap-style butt)
                  (join-style miter)
                  (miter-limit 10)
                  (dash-offset 0)
                  (dash-info 0)
                  (emulate-brush-dynamics no))

              The default stroke options for the stroke dialogs.  This is a
              parameter list.


       (fractalexplorer-path
       "${gimp_dir}/fractalexplorer:${gimp_data_dir}/fractalexplorer")

              Where to search for fractals used by the Fractal Explorer plug-
              in.  This is a colon-separated list of folders to search.


       (gfig-path "${gimp_dir}/gfig:${gimp_data_dir}/gfig")

              Where to search for Gfig figures used by the Gfig plug-in.  This
              is a colon-separated list of folders to search.


       (gflare-path "${gimp_dir}/gflare:${gimp_data_dir}/gflare")

              Where to search for gflares used by the GFlare plug-in.  This is
              a colon-separated list of folders to search.


       (gimpressionist-path
       "${gimp_dir}/gimpressionist:${gimp_data_dir}/gimpressionist")

              Where to search for data used by the Gimpressionist plug-in.
              This is a colon-separated list of folders to search.


       (script-fu-path "${gimp_dir}/scripts:${gimp_data_dir}/scripts")

              This path will be searched for scripts when the Script-Fu plug-
              in is run.  This is a colon-separated list of folders to search.


PATH EXPANSION
       Strings of type PATH are expanded in a manner similar to bash(1).
       Specifically: tilde (~) is expanded to the user's home directory. Note
       that the bash feature of being able to refer to other user's home
       directories by writing ~userid/ is not valid in this file.

       ${variable} is expanded to the current value of an environment
       variable.  There are a few variables that are pre-defined:

       gimp_dir
              The personal gimp directory which is set to the value of the
              environment variable GIMP2_DIRECTORY or to
              $XDG_CONFIG_HOME/GIMP/2.10.

       gimp_data_dir
              Base for paths to shareable data, which is set to the value of
              the environment variable GIMP2_DATADIR or to the compiled-in
              default value ${datarootdir}/gimp/2.0.

       gimp_plug_in_dir
              Base to paths for architecture-specific plug-ins and modules,
              which is set to the value of the environment variable
              GIMP2_PLUGINDIR or to the compiled-in default value
              ${exec_prefix}/lib/gimp/2.0.

       gimp_sysconf_dir
              Path to configuration files, which is set to the value of the
              environment variable GIMP2_SYSCONFDIR or to the compiled-in
              default value /etc/gimp/2.0.

       gimp_cache_dir
              Path to cached files, which is set to the value of the
              environment variable GIMP2_CACHEDIR or to the system default for
              per-user cached files.

       gimp_temp_dir
              Path to temporary files, which is set to the value of the
              environment variable GIMP2_TEMPDIR or to the system default for
              temporary files.


FILES
       /etc/gimp/2.0/gimprc
              System-wide configuration file

       $XDG_CONFIG_HOME/GIMP/2.10/gimprc
              Per-user configuration file


SEE ALSO
       gimp(1)



GIMP Manual Pages               Version 2.10.20                      GIMPRC(5)