GIT-DAEMON(1)                      Git Manual                      GIT-DAEMON(1)

       git-daemon - A really simple server for Git repositories

       git daemon [--verbose] [--syslog] [--export-all]
                    [--timeout=<n>] [--init-timeout=<n>] [--max-connections=<n>]
                    [--strict-paths] [--base-path=<path>] [--base-path-relaxed]
                    [--user-path | --user-path=<path>]
                    [--reuseaddr] [--detach] [--pid-file=<file>]
                    [--enable=<service>] [--disable=<service>]
                    [--allow-override=<service>] [--forbid-override=<service>]
                    [--access-hook=<path>] [--[no-]informative-errors]
                    [--inetd |
                     [--listen=<host_or_ipaddr>] [--port=<n>]
                     [--user=<user> [--group=<group>]]]

       A really simple TCP Git daemon that normally listens on port
       "DEFAULT_GIT_PORT" aka 9418. It waits for a connection asking for a
       service, and will serve that service if it is enabled.

       It verifies that the directory has the magic file "git-daemon-export-ok",
       and it will refuse to export any Git directory that hasn’t explicitly
       been marked for export this way (unless the --export-all parameter is
       specified). If you pass some directory paths as git daemon arguments, you
       can further restrict the offers to a whitelist comprising of those.

       By default, only upload-pack service is enabled, which serves git
       fetch-pack and git ls-remote clients, which are invoked from git fetch,
       git pull, and git clone.

       This is ideally suited for read-only updates, i.e., pulling from Git

       An upload-archive also exists to serve git archive.

           Match paths exactly (i.e. don’t allow "/foo/repo" when the real path
           is "/foo/repo.git" or "/foo/repo/.git") and don’t do user-relative
           paths.  git daemon will refuse to start when this option is enabled
           and no whitelist is specified.

           Remap all the path requests as relative to the given path. This is
           sort of "Git root" - if you run git daemon with --base-path=/srv/git
           on, then if you later try to pull
           git://, git daemon will interpret the path as

           If --base-path is enabled and repo lookup fails, with this option git
           daemon will attempt to lookup without prefixing the base path. This
           is useful for switching to --base-path usage, while still allowing
           the old paths.

           To support virtual hosting, an interpolated path template can be used
           to dynamically construct alternate paths. The template supports %H
           for the target hostname as supplied by the client but converted to
           all lowercase, %CH for the canonical hostname, %IP for the server’s
           IP address, %P for the port number, and %D for the absolute path of
           the named repository. After interpolation, the path is validated
           against the directory whitelist.

           Allow pulling from all directories that look like Git repositories
           (have the objects and refs subdirectories), even if they do not have
           the git-daemon-export-ok file.

           Have the server run as an inetd service. Implies --syslog (may be
           overridden with --log-destination=). Incompatible with --detach,
           --port, --listen, --user and --group options.

           Listen on a specific IP address or hostname. IP addresses can be
           either an IPv4 address or an IPv6 address if supported. If IPv6 is
           not supported, then --listen=hostname is also not supported and
           --listen must be given an IPv4 address. Can be given more than once.
           Incompatible with --inetd option.

           Listen on an alternative port. Incompatible with --inetd option.

           Timeout (in seconds) between the moment the connection is established
           and the client request is received (typically a rather low value,
           since that should be basically immediate).

           Timeout (in seconds) for specific client sub-requests. This includes
           the time it takes for the server to process the sub-request and the
           time spent waiting for the next client’s request.

           Maximum number of concurrent clients, defaults to 32. Set it to zero
           for no limit.

           Short for --log-destination=syslog.

           Send log messages to the specified destination. Note that this option
           does not imply --verbose, thus by default only error conditions will
           be logged. The <destination> must be one of:

               Write to standard error. Note that if --detach is specified, the
               process disconnects from the real standard error, making this
               destination effectively equivalent to none.

               Write to syslog, using the git-daemon identifier.

               Disable all logging.

           The default destination is syslog if --inetd or --detach is
           specified, otherwise stderr.

       --user-path, --user-path=<path>
           Allow ~user notation to be used in requests. When specified with no
           parameter, requests to git://host/~alice/foo is taken as a request to
           access foo repository in the home directory of user alice. If
           --user-path=path is specified, the same request is taken as a request
           to access path/foo repository in the home directory of user alice.

           Log details about the incoming connections and requested files.

           Use SO_REUSEADDR when binding the listening socket. This allows the
           server to restart without waiting for old connections to time out.

           Detach from the shell. Implies --syslog.

           Save the process id in file. Ignored when the daemon is run under

       --user=<user>, --group=<group>
           Change daemon’s uid and gid before entering the service loop. When
           only --user is given without --group, the primary group ID for the
           user is used. The values of the option are given to getpwnam(3) and
           getgrnam(3) and numeric IDs are not supported.

           Giving these options is an error when used with --inetd; use the
           facility of inet daemon to achieve the same before spawning git
           daemon if needed.

           Like many programs that switch user id, the daemon does not reset
           environment variables such as $HOME when it runs git programs, e.g.
           upload-pack and receive-pack. When using this option, you may also
           want to set and export HOME to point at the home directory of <user>
           before starting the daemon, and make sure any Git configuration files
           in that directory are readable by <user>.

       --enable=<service>, --disable=<service>
           Enable/disable the service site-wide per default. Note that a service
           disabled site-wide can still be enabled per repository if it is
           marked overridable and the repository enables the service with a
           configuration item.

       --allow-override=<service>, --forbid-override=<service>
           Allow/forbid overriding the site-wide default with per repository
           configuration. By default, all the services may be overridden.

           When informative errors are turned on, git-daemon will report more
           verbose errors to the client, differentiating conditions like "no
           such repository" from "repository not exported". This is more
           convenient for clients, but may leak information about the existence
           of unexported repositories. When informative errors are not enabled,
           all errors report "access denied" to the client. The default is

           Every time a client connects, first run an external command specified
           by the <path> with service name (e.g. "upload-pack"), path to the
           repository, hostname (%H), canonical hostname (%CH), IP address
           (%IP), and TCP port (%P) as its command-line arguments. The external
           command can decide to decline the service by exiting with a non-zero
           status (or to allow it by exiting with a zero status). It can also
           look at the $REMOTE_ADDR and $REMOTE_PORT environment variables to
           learn about the requestor when making this decision.

           The external command can optionally write a single line to its
           standard output to be sent to the requestor as an error message when
           it declines the service.

           A directory to add to the whitelist of allowed directories. Unless
           --strict-paths is specified this will also include subdirectories of
           each named directory.

       These services can be globally enabled/disabled using the command-line
       options of this command. If finer-grained control is desired (e.g. to
       allow git archive to be run against only in a few selected repositories
       the daemon serves), the per-repository configuration file can be used to
       enable or disable them.

           This serves git fetch-pack and git ls-remote clients. It is enabled
           by default, but a repository can disable it by setting
           daemon.uploadpack configuration item to false.

           This serves git archive --remote. It is disabled by default, but a
           repository can enable it by setting daemon.uploadarch configuration
           item to true.

           This serves git send-pack clients, allowing anonymous push. It is
           disabled by default, as there is no authentication in the protocol
           (in other words, anybody can push anything into the repository,
           including removal of refs). This is solely meant for a closed LAN
           setting where everybody is friendly. This service can be enabled by
           setting daemon.receivepack configuration item to true.

       We assume the following in /etc/services

               $ grep 9418 /etc/services
               git             9418/tcp                # Git Version Control System

       git daemon as inetd server
           To set up git daemon as an inetd service that handles any repository
           under the whitelisted set of directories, /pub/foo and /pub/bar,
           place an entry like the following into /etc/inetd all on one line:

                       git stream tcp nowait nobody  /usr/bin/git
                               git daemon --inetd --verbose --export-all
                               /pub/foo /pub/bar

       git daemon as inetd server for virtual hosts
           To set up git daemon as an inetd service that handles repositories
           for different virtual hosts, and,
           place an entry like the following into /etc/inetd all on one line:

                       git stream tcp nowait nobody /usr/bin/git
                               git daemon --inetd --verbose --export-all

           In this example, the root-level directory /pub will contain a
           subdirectory for each virtual host name supported. Further, both
           hosts advertise repositories simply as
           git:// For pre-1.4.0 clients, a
           symlink from /software into the appropriate default repository could
           be made as well.

       git daemon as regular daemon for virtual hosts
           To set up git daemon as a regular, non-inetd service that handles
           repositories for multiple virtual hosts based on their IP addresses,
           start the daemon like this:

                       git daemon --verbose --export-all

           In this example, the root-level directory /pub will contain a
           subdirectory for each virtual host IP address supported. Repositories
           can still be accessed by hostname though, assuming they correspond to
           these IP addresses.

       selectively enable/disable services per repository
           To enable git archive --remote and disable git fetch against a
           repository, have the following in the configuration file in the
           repository (that is the file config next to HEAD, refs and objects).

                               uploadpack = false
                               uploadarch = true

       git daemon will set REMOTE_ADDR to the IP address of the client that
       connected to it, if the IP address is available. REMOTE_ADDR will be
       available in the environment of hooks called when services are performed.

       Part of the git(1) suite

Git 2.31.0                         03/15/2021                      GIT-DAEMON(1)