IBOD.CF(4)                 Kernel Interfaces Manual                 IBOD.CF(4)

       ibod.cf - configuration file for ibod (ISDN Bandwidth On Demand)

       This file contains the initial configuration values for the ibod
       daemon. Each line contains a keyword and a value.

       Boolean attributes are set with 0 or 1 which corresponds to false and
       true respectively. A boolean attribute not specified at all is always

       Lines beginning with # are treated as comments and will be ignored.

       1. Keywords are case sensitive.
       2. Kewords must begin at the first column.
       3. Keywords and values must be separated by exactly one (1) space or
       tab character.

       This file is re-read every time ibod receives SIGHUP (1) signal.

       DEVICE <name>
              Name of ISDN PPP device. Default is ippp0.

       ENABLE 1|0
              Enable/disable bandwidth-on-demand.  Default is enable (1).

       INTERVAL <n>
              Specify the sample time interval in ms.  Default is 500 ms.

       FILTER <n>
              Defines "filtering factor". A value of 10 means that the average
              bytes/sec value measured over 10 intervals must pass the limit
              defined by LIMIT to bring up or down the slave link.  Default is

       LIMIT <n>
              Transfer rate limit in bytes/sec for bringing up or down ISDN
              slave channel. Default is 7000.

       STAYUP 0|1
              Enable/disable slave channel stay up function.  If enabled, the
              2:nd cannel (slave link) will stay up even if the average
              bytes/sec decrease the value defined by LIMIT. In this case the
              slave link will stay up until hangup time is reached.  (Example:
              isdnctrl huptimeout ippp1 60) If disabled the slave link will be
              brought down in the same way it was brought up.  Default is 0.

       STAYUP_TIME <n>
              Defines the minimum time in seconds the 2:nd channel will
              unconditionally stay up after it has been brought up. Default
              value is 30.

       ibod(1) and xibod(1)

       Bjoern Smith, Smith@Compound.SE