jfs_mkfs

jfs_mkfs(8)                JFS file system creation                jfs_mkfs(8)



NAME
       jfs_mkfs - create a JFS formatted partition


SYNOPSIS
       jfs_mkfs [options] device [ blocks ]


DESCRIPTION
       jfs_mkfs is used to create (format) a JFS partition.  jfs_mkfs must be
       run as root.


       device is the special file name corresponding to the actual device
       (e.g. /dev/hdb1) on which a JFS file system and/or JFS journal will be
       created.  blocks is the number of blocks to be used for the file
       system.  If omitted, jfs_mkfs automatically figures the file system
       size.


       The default block size is 4096.


WARNING
       jfs_mkfs will destroy all data on the specified device!


OPTIONS
       -c     Check the device for bad blocks before building the file system.



       -j journal_device
              Create the external JFS journal on journal_device , create the
              JFS file system on device , and attach the external journal to
              the file system.


       -J journal-options
              Create the JFS journal on its own device or attach an external
              JFS journal to the JFS file system using options specified on
              the command-line.  The following journal options are supported:

                   journal_dev
                          Create an external JFS journal on the given device.

                   device=external-journal
                          Attach an existing external JFS journal located on
                          external-journal to the JFS file system that will be
                          created on device.  The external journal must
                          already have been created using the command

                          jfs_mkfs -J journal_dev external-journal

                          Attach the external journal to the file system being
                          created by using the command

                          jfs_mkfs -J device=external-journal device

                          Instead of specifying a device name directly,
                          external-journal can also be specified by either
                          LABEL=label or UUID=UUID to locate the external
                          journal by either the volume label or UUID stored in
                          the JFS external log superblock at the start of the
                          journal.  Use jfs_tune(8) to display a journal
                          device's volume label and UUID.  (See the -l, -L,
                          and -U options of jfs_tune(8).)

              Only one of the journal_dev or device= options can be given per
              jfs_mkfs issuance.


       -L volume_label
              Set the volume label for the newly formatted device.

              If -L volume_label is used along with -J journal_device, the
              volume label of the specified external journal device will be
              set to volume_label.  Otherwise, the volume label of the JFS
              file system will be set to volume_label.


       -O     Provide case-insensitive support for compatibility with OS/2.


       -q     Quiet execution - do not ask for confirmation before creating
              the file system.


       -s log_size
              Set the log size (in megabytes) of the inline log.  If the -s
              option is not used, the default log size is 0.4% of the
              aggregate size.


       -V     Print version information and exit (regardless of any other
              chosen options).


EXAMPLES
       Format 3rd partition on 2nd hard disk with the volume label "JFS_hdb3":

              jfs_mkfs -L JFS_hdb3 /dev/hdb3

       Format 5th partition on 1st hard disk, verifying each block created:

              jfs_mkfs -c /dev/hda5

       Format 3rd partition on 2nd hard disk as external journal, format 4th
       partition on 1st hard disk as JFS file system, and attach the external
       journal to the file system:

              jfs_mkfs -j /dev/hdb3 /dev/hda4

REPORTING BUGS
       If you find a bug in JFS or jfs_mkfs, please report it via the bug
       tracking system ("Report Bugs" section) of the JFS project web site:
       http://jfs.sourceforge.net/

       Please send as much pertinent information as possible including any
       error messages resulting from running jfs_mkfs.


SEE ALSO
       mkfs(8), jfs_fsck(8), jfs_fscklog(8), jfs_tune(8), jfs_logdump(8),
       jfs_debugfs(8)



AUTHORS
       Barry Arndt  (barndt@us.ibm.com)
       William Braswell, Jr.

       jfs_mkfs is maintained by IBM.
       See the JFS project web site for more details:
       http://jfs.sourceforge.net/



                                 March 9, 2005                     jfs_mkfs(8)