keepalived.conf ‐ configuration file for Keepalived

keepalived.conf is the configuration file which describes
all the Keepalived keywords. Keywords are placed in
hierarchies of blocks and subblocks, each layer being
delimited by ’{’ and ’}’ pairs.

     Comments start with ’#’ or ’!’ to the end of the line
and can start anywhere in a line.

     The keyword ’include’ allows inclusion of other
configuration files from within the main configuration file,
or from subsequently included files.

     The format of the include directive is:

include FILENAME

     FILENAME can be a fully qualified or relative pathname,
and can include wildcards, including csh style brace
expressions such as "{foo/{,cat,dog},bar}" if glob()
supports them.

     After opening an included file, the current directory
is set to the directory of the file itself, so any relative
paths included from a file are relative to the directory of
the including file itself.

     Note: This documentation MUST be considered as THE
exhaustive source of information in order to configure
Keepalived. This documenation is supported and maintained by
Keepalived Core‐Team.

<BOOL> is one of on|off|true|false|yes|no
<TIMER> is a time value in seconds, including fractional
seconds, e.g. 2.71828 or 3; resolution of timer is micro‐

There are three classes of scripts can be configured to be

(a) Notify scripts that are run when a vrrp instance or vrrp
group changes state, or a virtual server quorum changes
between up and down.

(b) vrrp tracking scripts that will cause vrrp instances to
go down it they exit a non‐zero exist status, or if a weight
is specified will add or subtract the weight to/from the
priority of that vrrp instance.

(c) LVS checker misc scripts that will cause a real server
to be configured down if they exit with a non‐zero status.


By default the scripts will be executed by user
keepalived_script if that user exists, or if not by root,
but for each script the user/group under which it is to be
executed can be specified.

There are significant security implications if scripts are
executed with root privileges, especially if the scripts
themselves are modifiable or replaceable by a non root user.
Consequently, security checks are made at startup to ensure
that if a script is executed by root, then it cannot be
modified or replaced by a non root user.

All scripts should be written so that they will terminate on
receipt of a SIGTERM signal. Scripts will be sent SIGTERM if
their parent terminates, or it is a script the keepalived is
awaiting its exit status and it has run for too long.

Quoted strings are specified between " characters; more
specifically a string will only end after a quoted string if
there is whitespace afterwards. For example:
     "abcd" efg h jkl "mnop"
will be the single string "abcd efg h jkl mnop", i.e. the
embedded " characters are removed.

     Quoted strings can also have escaped characters, like
the shell. \a, \b, \E, \f, \n, \r, \t, \v, \nnn and \xXX
(where nnn is up to 3 octal digits, and XX is any sequence
of hex digits) and \cC (which produces the control version
of character C) are all supported. \C for any other
character C is just treated as an escaped version of
character C, so \\ is a \ character and \" will be a "
character, but it won’t start or terminate a quoted string.

     For specifying scripts with parameters, unquoted spaces
will separate the parameters.  If it is required for a
parameter to contain a space, it should be enclosed in
single quotes (’).

Traditionally the configuration file parser has not been one
of the strengths of keepalived. Lot of efforts have been put
to correct this even if this is not the primal goal of the

     Keepalived configuration file is articulated around a
set of configuration blocks.  Each block is focusing and
targetting a specific daemon family feature. These features






contains subblocks of Global definitions, Linkbeat
interfaces, Static track groups, Static addresses, Static
routes, and Static rules

     # Following are global daemon facilities for running
# keepalived in a separate network namespace:
# ‐‐
# Set the network namespace to run in.
# The directory /var/run/keepalived will be created as an
# unshared mount point, for example for pid files.
# syslog entries will have _NAME appended to the ident.
# Note: the namespace cannot be changed on a configuration reload.
net_namespace NAME

# ipsets wasn’t network namespace aware until Linux 3.13, and so
# if running with # an earlier version of the kernel, by default
# use of ipsets is disabled if using a namespace and vrrp_ipsets
# has not been specified. This options overrides the default and
# allows ipsets to be used with a namespace on kernels prior to 3.13.

# If multiple instances of keepalived are run in the same namespace,
# this will create pid files with NAME as part of the file names,
# in /var/run/keepalived.
# Note: the instance name cannot be changed on a configuration reload
instance NAME

# Create pid files in /var/run/keepalived

# Poll to detect media link failure using ETHTOOL, MII or ioctl interface
# otherwise uses netlink interface.

# Time for main process to allow for child processes to exit on termination
# in seconds. This can be needed for very large configurations.
# (default: 5)
child_wait_time SECS

# Global definitions configuration block
global_defs {
    # Set the process names of the keepalived processes to the default values:
    #   keepalived, keepalived_vrrp, keepalived_ipvs, keepalived_bfd



    # Specify the individual process names
    process_name NAME
    vrrp_process_name NAME
    ipvs_process_name NAME
    bfd_process_name NAME

    # Set of email To: notify
    notification_email {

    # email from address that will be in the header
    # (default: keepalived@<local host name>)

    # Remote SMTP server used to send notification email.
    # IP address or domain name with optional port number.
    # (default port number: 25)
    smtp_server [<PORT>]

    # Name to use in HELO messages.
    # (default: local host name)
    smtp_helo_name <STRING>

    # SMTP server connection timeout in seconds.
    smtp_connect_timeout 30

    # Sets default state for all smtp_alerts
    smtp_alert <BOOL>

    # Sets default state for vrrp smtp_alerts
    smtp_alert_vrrp <BOOL>

    # Sets default state for checker smtp_alerts
    smtp_alert_checker <BOOL>

    # Sets logging all checker failes while checker up
    checker_log_all_failures <BOOL>

    # Don’t send smtp alerts for fault conditions

    # String identifying the machine (doesn’t have to be hostname).
    # (default: local host name)
    router_id <STRING>

    # Multicast Group to use for IPv4 VRRP adverts
    # (default:

    # Multicast Group to use for IPv6 VRRP adverts


    # (default: ff02::12)
    vrrp_mcast_group6 ff02::12

    # sets the default interface for static addresses.
    # (default: eth0)
    default_interface p33p1.3

    # Sync daemon as provided by IPVS kernel code only support
    # a single daemon instance at a time to synchronize connection table.
    # Binding interface, vrrp instance and optional
    #  syncid for lvs syncd
    #  syncid (0 to 255) for lvs syncd
    #  maxlen (1..65507) maximum packet length
    #  port (1..65535) UDP port number to use
    #  ttl (1..255)
    #  group ‐ multicast group address (IPv4 or IPv6)
    # NOTE: maxlen, port, ttl and group are only available on Linux 4.3 or later.
    lvs_sync_daemon <INTERFACE> <VRRP_INSTANCE> [id <SYNC_ID>] [maxlen <LEN>] \
                    [port <PORT>] [ttl <TTL>] [group <IP ADDR>]

    # flush any existing LVS configuration at startup

    # flush remaining LVS configuration at shutdown
    # If VS is specified, remove each keepalived managed virtual
    # server without explicitly removing the real servers (the kernel will
    # remove them).
    lvs_flush_onstop [VS]

    # delay for second set of gratuitous ARPs after transition to MASTER.
    # in seconds, 0 for no second set.
    # (default: 5)
    vrrp_garp_master_delay 10

    # number of gratuitous ARP messages to send at a time after
    # transition to MASTER.
    # (default: 5)
    vrrp_garp_master_repeat 1

    # delay for second set of gratuitous ARPs after lower priority
    # advert received when MASTER.
    vrrp_garp_lower_prio_delay 10

    # number of gratuitous ARP messages to send at a time after
    # lower priority advert received when MASTER.
    vrrp_garp_lower_prio_repeat 1

    # minimum time interval for refreshing gratuitous ARPs while MASTER.
    # in seconds.
    # (default: 0 (no refreshing))
    vrrp_garp_master_refresh 60

    # number of gratuitous ARP messages to send at a time while MASTER
    # (default: 1)


    vrrp_garp_master_refresh_repeat 2

    # Delay in ms between gratuitous ARP messages sent on an interface
    # decimal, seconds (resolution usecs).
    # (default: 0)
    vrrp_garp_interval 0.001

    # Delay in ms between unsolicited NA messages sent on an interface
    # decimal, seconds (resolution usecs).
    # (default: 0)
    vrrp_gna_interval 0.000001

    # By default keepalived sends 5 gratuitions ARP/NA messages at a
    # time, and after transitioning to MASTER sends a second block of
    # 5 messages 5 seconds later.
    # With modern switches this is unnecessary, so setting vrrp_min_garp
    # causes only one ARP/NA message to be sent, with no repeat 5 seconds
    # later.
    vrrp_min_garp [<BOOL>]

    # If a lower priority advert is received, don’t send another advert.
    # This causes adherence to the RFCs. Defaults to false, unless
    # strict_mode is set.
    vrrp_lower_prio_no_advert [<BOOL>]

    # If we are master and receive a higher priority advert, send an advert
    # (which will be lower priority than the other master), before we
    # transition to backup. This means that if the other master has
    # garp_lower_priority_repeat set, it will resend garp messages.
    # This is to get around the problem of their having been two simultaneous
    # masters, and the last GARP messages seen were from us.
    vrrp_higher_prio_send_advert [<BOOL>]

    # Set the default VRRP version to use
    # (default: 2, but IPv6 instances will use version 3)
    vrrp_version <2 or 3>

    # Specify the iptables chain for ensuring a version 3 instance
    # doesn’t respond on addresses that it doesn’t own.
    # Note: it is necessary for the specified chain to exist in
    # the iptables and/or ip6tables configuration, and for the chain
    # to be called from an appropriate point in the iptables configuration.
    # It will probably be necessary to have this filtering after accepting
    # any ESTABLISHED,RELATED packets, because IPv4 might select the VIP as
    # the source address for outgoing connections.
    # (default: INPUT)
    vrrp_iptables keepalived

    # or for outbound filtering as well
    # Note, outbound filtering won’t work with IPv4, since the VIP can be
    # selected as the source address for an outgoing connection. With IPv6
    # this is unlikely since the addresses are deprecated.
    vrrp_iptables keepalived_in keepalived_out


    # or to not add any iptables rules:

    # Keepalived may have the option to use ipsets in conjunction with
    # iptables. If so, then the ipset names can be specified, defaults
    # as below. If no names are specified, ipsets will not be used,
    # otherwise any omitted names will be constructed by adding "_if"
    # and/or "6" and _igmp/_mld to previously specified names.
    vrrp_ipsets [keepalived [keepalived6 [keepalived_if6 [keepalived_igmp [keepalived_mld]]]]]

    # Use nftables to implement no_accept mode and only send IGMP/MLD
    #   messages on the parent interface of a VMAC.
    #   TABLENAME must not exist, and must be different for each
    #   instance of keepalived running in the same network namespace.
    #   Default tablename is keepalived, and priority is ‐1.
    #   keepalived will create base chains in the table.
    #   counters means counters are added to the rules (primarily for
    #   debugging purposes).
    #   ifindex means create IPv6 link local sets using ifindex rather
    #   than ifnames. This is the default unless the vrrp_instance has
    #   set dont_track_primary. The alternative is to use interface names
    #   as part of the set key, but the nft utility prior to v0.8.3 will
    #   then not output interface names properly.
    nftables [TABLENAME]
    nftables_priority PRIORITY

    # The following enables checking that when in unicast mode, the
    # source address of a VRRP packet is one of our unicast peers.

    # Checking all the addresses in a received VRRP advert can be time
    # consuming. Setting this flag means the check won’t be carried out
    # if the advert is from the same master router as the previous advert
    # received.
    # (default: don’t skip)

    # Enforce strict VRRP protocol compliance. This will prohibit:
    #   0 VIPs
    #   unicast peers
    #   IPv6 addresses in VRRP version 2

    # Send vrrp instance priority notifications on notify FIFOs.
    vrrp_notify_priority_changes <BOOL>

    # The following options can be used if vrrp, checker or bfd  processes
    # are timing out. This can be seen by a backup vrrp instance becoming
    # master even when the master is still running because the master or
    # backup system is too busy to process vrrp packets.
    # ‐‐
    # Set the vrrp child process priority (Negative values increase priority)


    vrrp_priority <‐20 to 19>

    # Set the checker child process priority
    checker_priority <‐20 to 19>

    # Set the BFD child process priority
    bfd_priority <‐20 to 19>

    # Set the vrrp child process non swappable

    # Set the checker child process non swappable

    # Set the BFD child process non swappable

    # The following options can be used to force vrrp, checker and bfd
    # processes to run on a restricted CPU set.
    # You can either bind processes to a single CPU or define a set of
    # cpu. In that last case Linux kernel will be restricted to that cpu
    # set during scheduling. Forcing process binding to single CPU can
    # increase performances on heavy loaded box.
    # INTEGER following configuration keyword are representing cpu_id
    # as shown in /proc/cpuinfo on line "processor:"
    # ‐‐
    # Set CPU Affinity for the vrrp child process
    vrrp_cpu_affinity <INTEGER> [<INTERGER>]...[<INTEGER>]

    # Set CPU Affinity for the checker child process
    checker_cpu_affinity <INTEGER> [<INTERGER>]...[<INTEGER>]

    # Set CPU Affinity for the bfd child process
    bfd_cpu_affinity <INTEGER> [<INTERGER>]...[<INTEGER>]

    # Set the vrrp child process to use real‐time scheduling
    # at the specified priority
    vrrp_rt_priority <1..99>

    # Set the checker child process to use real‐time scheduling
    # at the specified priority
    checker_rt_priority <1..99>

    # Set the BFD child process to use real‐time scheduling
    # at the specified  priority
    bfd_rt_priority <1..99>

    # Set the limit on CPU time between blocking system calls,
    # in microseconds
    # (default: 1000)
    vrrp_rlimit_rtime >=1
    checker_rlimit_rtime >=1
    bfd_rlimit_rtime >=1


    # If Keepalived has been build with SNMP support, the following
    # keywords are available.
    # Note: Keepalived, checker and RFC support can be individually
    # enabled/disabled
    # ‐‐
    # Specify socket to use for connecting to SNMP master agent
    # (see source module keepalived/vrrp/vrrp_snmp.c for more details)
    # (default: unix:/var/agentx/master)
    snmp_socket udp:

    # enable SNMP handling of vrrp element of KEEPALIVED MIB

    # enable SNMP handling of checker element of KEEPALIVED MIB

    # enable SNMP handling of RFC2787 and RFC6527 VRRP MIBs

    # enable SNMP handling of RFC2787 VRRP MIB

    # enable SNMP handling of RFC6527 VRRP MIB

    # enable SNMP traps

    # If Keepalived has been build with DBus support, the following
    # keywords are available.
    # ‐‐
    # Enable the DBus interface

    # Name of DBus service
    # Useful if you want to run multiple keepalived processes with DBus enabled
    # (default: org.keepalived.Vrrp1)
    dbus_service_name SERVICE_NAME

    # Specify the default username/groupname to run scripts under.
    # If this option is not specified, the user defaults to keepalived_script
    # if that user exists, otherwise root.
    # If groupname is not specified, it defaults to the user’s group.
    script_user username [groupname]

    # Don’t run scripts configured to be run as root if any part of the path
    # is writable by a non‐root user.

    # Rather than using notify scripts, specifying a fifo allows more
    # efficient processing of notify events, and guarantees that they
    # will be delivered in the correct sequence.
    # NOTE: the FIFO names must all be different
    # ‐‐


    # FIFO to write notify events to
    # See vrrp_notify_fifo and lvs_notify_fifo for format of output
    # For further details, see the description under vrrp_sync_group.
    # see doc/samples/ for sample usage.
    notify_fifo FIFO_NAME [username [groupname]]

    # script to be run by keepalived to process notify events
    # The FIFO name will be passed to the script as the last parameter
    notify_fifo_script STRING|QUOTED_STRING [username [groupname]]

    # FIFO to write vrrp notify events to.
    # The string written will be a line of the form: INSTANCE "VI_1" MASTER 100
    # and will be terminated with a new line character.
    # For further details of the output, see the description under vrrp_sync_group
    # and doc/samples/ for sample usage.
    vrrp_notify_fifo FIFO_NAME [username [groupname]]

    # script to be run by keepalived to process vrrp notify events
    # The FIFO name will be passed to the script as the last parameter
    vrrp_notify_fifo_script STRING|QUOTED_STRING [username [groupname]]

    # FIFO to write notify healthchecker events to
    # The string written will be a line of the form:
    # VS []:tcp:80 {UP|DOWN}
    # RS []:tcp:80 []:tcp:80 {UP|DOWN}
    # and will be terminated with a new line character.
    lvs_notify_fifo FIFO_NAME [username [groupname]]

    # script to be run by keepalived to process healthchecher notify events
    # The FIFO name will be passed to the script as the last parameter
    lvs_notify_fifo_script STRING|QUOTED_STRING [username [groupname]]

    # Allow configuration to include interfaces that don’t exist at startup.
    # This allows keepalived to work with interfaces that may be deleted and restored
    #   and also allows virtual and static routes and rules on VMAC interfaces.
    #   allow_if_changes allows an interface to be deleted and recreated with a
    #   different type or underlying interface, eg changing from vlan to macvlan
    #   or changing a macvlan from eth1 to eth2. This is predominantly used for
    #   reporting duplicate VRID errors at startup if allow_if_changes is not set.
    dynamic_interfaces [allow_if_changes]

    # The following options are only needed for large configurations, where either
    # keepalived creates a large number of interface, or the system has a large
    # number of interface. These options only need using if
    # "Netlink: Receive buffer overrun" messages are seen in the system logs.
    # If the buffer size needed exceeds the value in /proc/sys/net/core/rmem_max
    #  the corresponding force option will need to be set.
    # ‐‐
    # Set netlink receive buffer size. This is useful for
    # very large configurations where a large number of interfaces exist, and
    # the initial read of the interfaces on the system causes a netlink buffer
    # overrun.
    vrrp_netlink_cmd_rcv_bufs BYTES
    vrrp_netlink_cmd_rcv_bufs_force <BOOL>


    vrrp_netlink_monitor_rcv_bufs BYTES
    vrrp_netlink_monitor_rcv_bufs_force <BOOL>

    # The vrrp netlink command and monitor socket the checker command and
    # and monitor socket and process monitor buffer sizes can be independently set.
    # The force flag means to use SO_RCVBUFFORCE, so that the buffer size
    # can exceed /proc/sys/net/core/rmem_max.
    lvs_netlink_cmd_rcv_bufs BYTES
    lvs_netlink_cmd_rcv_bufs_force <BOOL>
    lvs_netlink_monitor_rcv_bufs BYTES
    lvs_netlink_monitor_rcv_bufs_force <BOOL>

    # As a guide for process_monitor_rcv_bufs for 1400 processes terminating
    # simultaneously, 212992 (the default on some systems) is insufficient, whereas
    # 500000 is sufficient.
    process_monitor_rcv_bufs BYTES
    process_monitor_rcv_bufs_force <BOOL>

    # When a socket is opened, the kernel configures the max rx buffer size for
    # the socket to /proc/sys/net/core/rmem_default. On some systems this can be
    # very large, and even generally this can be much larger than necessary.
    # This isn’t a problem so long as keepalived is reading all queued data from
    # it’s sockets, but if rmem_default was set sufficiently large, and if for
    # some reason keepalived stopped reading, it could consume all system memory.
    # The vrrp_rx_bufs_policy allows configuring of the rx bufs size when the
    # sockets are opened. If the policy is MTU, the rx buf size is configured
    # to the total of interface’s MTU * vrrp_rx_bufs_multiplier for each vrrp
    # instance using the socket. Likewise, if the policy is ADVERT, then it is
    # the total of each vrrp instances advert packet size * multiplier.
    # (default: use system default)
    vrrp_rx_bufs_policy [MTU|ADVERT|NUMBER]

    # (default: 3)
    vrrp_rx_bufs_multiplier NUMBER

    # Send notifies at startup for real servers that are starting up

    # Don’t send an email every time a real server checker changes state;
    # only send email when a real server is added or removed

    # The umask to use for creating files. The number can be specified in hex, octal
    #   or decimal. BITS are I{R|W|X}{USR|GRP|OTH}, e.g. IRGRP, separated by ’|’s.
    #   The default umask is IWGRP | IWOTH. This option cannot override the
    #   command‐line option.
    umask [NUMBER|BITS]

    # On some systems when bond interfaces are created, they can start passing traffic
    # and then have a several second gap when they stop passing traffic inbound. This
    # can mean that if keepalived is started at boot time, i.e. at the same time as
    # bond interfaces are being created, keepalived doesn’t receive adverts and hence
    # can become master despite an instance with higher priority sending adverts.
    # This option specifies a delay in seconds before vrrp instances start up after


    # keepalived starts,
    vrrp_startup_delay 5.5

    # The following will cause logging of receipt of VRRP adverts for VRIDs not configured
    # on the interface on which they are received.

    # Specify random seed for ${_RANDOM}, to make configurations repeatable (default
    # is to use a seed based on the time, so that each time a different configuration
    # will be generated).
    random_seed UNSIGNED_INT

     The linkbeat_interfaces block allows specifying which
interfaces should use polling via MII, Ethtool or ioctl
status rather than rely on netlink status updates. This
allows more granular control of global definition

     This option is preferred over the deprecated use of
linkbeat_use_polling in a vrrp_instance block, since the
latter only allows using linkbeat on the interface of the
vrrp_instance itself, whereas track_interface and
virtual_ipaddresses and virtual_iproutes may require
monitoring other interfaces, which may need to use linkbeat

     The default polling type to use is MII, unless that
isn’t supported in which case ETHTOOL is used, and if that
isn’t supported then ioctl polling. The preferred type of
polling to use can be specified with MII or ETHTOOL or IOCTL
after the interface name, but if that type isn’t supported,
a supported type will be used.

     The synfax for linkbeat_interfaces is:
    linkbeat_interfaces {
        enp2s0 ETHTOOL

     Static track groups are used to allow vrrp instances to
track static addresses, routes and rules. If a static
address/route/rule specifies a track group, then if the
address/route/rule is deleted and cannot be restored, the
vrrp instance will transition to fault state.

     The syntax for a track group is:
    track_group GROUP1 {
        group {



     Keepalived can configure static addresses, routes, and
rules. These addresses are NOT moved by vrrpd, they stay on
the machine.  If you already have IPs and routes on your
machines and your machines can ping each other, you don’t
need this section.  The syntax for rules and routes is that
same as for ip rule add/ip route add (except shorted option
names aren’t supported due to ambiguities).  The track_group
specification refers to a named track_group which lists the
vrrp instances which will track the address, i.e. if the
address is deleted the vrrp instances will transition to

NOTE: since rules without preferences can be added in
different orders due to vrrp instances transitioning from
master to backup etc, rules need to have a preference. If a
preference is not specified, keepalived will assign one, but
it will probably not be what you want.

     The syntax is the same for virtual addresses and
virtual routes. If no dev element is specified, it defaults
to default_interface (default eth0).  Note: the broadcast
address may be specified as ’‐’ or ’+’ to clear or set the
host bits of the address.

     If a route or rule could apply to either IPv4 or IPv6
it will default to IPv4.  To force a route/rule to be IPv6,
add the keyword "inet6".

         static_ipaddress {
        <IPADDR>[/<MASK>] [brd <IPADDR>] [dev <STRING>] [scope <SCOPE>]
                          [label <LABEL>] [peer <IPADDR>] [home]
                          [‐nodad] [mngtmpaddr] [noprefixroute]
                          [autojoin] [track_group GROUP] [preferred_lft nn|forever] dev eth0 scope global

         static_routes { via dev eth0 track_group GROUP1 table 6909 nexthop via dev wlan0
                         onlink weight 1 nexthop via
                         dev wlan0 onlink weight 2 dev p33p1.2 table 6909 tos 0x04 protocol bird
                         scope link priority 12 mtu 1000 hoplimit 100
                         advmss 101 rtt 102 rttvar 103 reordering 104
                         window 105 cwnd 106 ssthresh lock 107 realms


                         PQA/0x14 rto_min 108 initcwnd 109 initrwnd 110
                         features ecn

        2001:470:69e9:1:2::4 dev p33p1.2 table 6909 tos 0x04 protocol
                             bird scope link priority 12 mtu 1000
                             hoplimit 100 advmss 101 rtt 102 rttvar 103
                             reordering 104 window 105 cwnd 106 ssthresh
                             lock 107 rto_min 108 initcwnd 109
                             initrwnd 110 features ecn fastopen_no_cookie 1

         static_rules {
        from table 1 track_group GROUP1

        to table 1

        from to table small iif p33p1
                             oif wlan0 tos 22 fwmark 24/12
                             preference 39 realms 30/20 goto 40

        to 1:2:3:4:5:6:7:0/112 from 7:6:5:4:3:2::/96 table 6908
                               uidrange 10000‐19999

        to 1:2:3:4:6:6:7:0/112 from 8:6:5:4:3:2::/96 l3mdev protocol 12
                               ip_proto UDP sport 10‐20 dport 20‐30

     The configuration block looks like:

    vrrp_track_process <STRING> {
        # process to monitor (with optional parameters)
        # A quoted string is treated as a single element, so if the first item
        # after the process keyword is quoted, that will be the command name.
        # For example:
        #  process "/tmp/a b" param1 "param 2"
        # would mean a process named ’/tmp/a b’ (quotes removed) with 2 parameters
        #  ’param1’ and ’param 2’.

        # If matching parameters, this specifies a partial match (i.e. the first
        #   n parameters match exactly), or an initial match, i.e. the last
        #   parameter may be longer that the parameter configured.
        # To specify that a command must have no parameters, don’t specify
        #   any parameters, but specify param_match.
        param_match {initial|partial}

        # default weight (default is 1). For description of reverse, see track_process.
        # ’weight 0 reverse’ will cause the vrrp instance to be down when the
        # quorum is up, and vice versa.


        weight <‐254..254> [reverse]

        # minimum number of processes for success
        quorum NUM

        # maximum number of processes for success. For example, setting
        #   this to 1 would cause a failure if two instances of the process
        #   were running (but beware forks ‐ see fork_delay below).
        #   Setting this to 0 would mean failure if the matching process were
        #   running at all.
        quorum_max NUM

        # time to delay after process quorum gained after fork before
        #   consider process up (in fractions of second)
        #   This is to avoid up/down bounce for fork/exec
        fork_delay SECS

        # time to delay after process quorum lost before
        #   consider process down (in fractions of second)
        #   This is to avoid down/up bounce after terminate/parent refork.
        terminate_delay SECS

        # this sets fork_delay and terminate_delay
        delay SECS

        # Normally process string is matched against the process name,
        #   as shown on the Name: line in /proc/PID/status, unless
        #   parameters are specified.
        #   This option forces matching the full command line

     To avoid having to frequently run a track_script to
monitor the existance of processes (often haproxy or nginx),
vrrp_track_process can monitor whether other processes are

     One difference from pgrep is track_process doesn’t do a
regular expression match of the command string, but does an
exact match. ’pgrep ssh’ will match an sshd process, this
track_process will not (it is equivalent to pgrep "^ssh$").

     If full_command is used (equivalent to pgrep ‐f),
/proc/PID/cmdline is used, but any updates to cmdline will
not be detected (a process shouldn’t normally change it,
although it is possible with great care, for example

     Prior to Linux v3.2 track_process will not support
detection of changes to a process name, since the kernel did
not notify changes of process name prior to 3.2. Most
processes do not change their process name, but, for
example, firefox forks processes that change their process
name to "Web Content". The process name referred to here is


the contents of /proc/PID/comm.

     Quorum is the number of matching processes that must be
run for an OK status.

     Delay might be useful if it anticipated that a process
may be reloaded (stopped and restarted), and it isn’t
desired to down and up a vrrp instance.

     A positive weight means that an OK status will add
<weight> to the priority of all VRRP instances which monitor
it. On the opposite, a negative weight will be subtracted
from the initial priority in case of insufficient processes.

     If the vrrp instance or sync group is not the address
owner and the result is between ‐253 and 253, the result
will be added to the initial priority of the VRRP instance
(a negative value will reduce the priority), although the
effective priority will be limited to the range [1,254].

     If a vrrp instance using a track_process is a member of
a sync group, unless sync_group_tracking_weight is set on
the group weight 0 must be set.  Likewise, if the vrrp
instance is the address owner, weight 0 must also be set.

     Rational for not using pgrep/pidof/killall and the

     Every time pgrep or its equivalent is run, it iterates
though the /proc/[1‐9][0‐9]* directories, and opens the
status and cmdline pseudo files in each directory.  The
cmdline pseudo file is mapped to the process’s address
space, and so if that part of the process is swapped out, it
will have to be fetched from the swap space.  pgrep etc also
include zombie processes whereas keepalived does not, since
they aren’t running.

     This implementation only iterates though
/proc/[1‐9][0‐9]*/ directories at start up, and it won’t
even read the cmdline pseudo files if ’full_command’ is not
specified for any of the vrrp_track_process entries. After
startup, it uses the process_events kernel <‐> userspace
connector to receive notification of process changes. If
full_command is specified for any track_process instance,
the cmdline pseudo file will have to be read upon
notification of the creation of the new process, but at that
time it is very unlikely that it will have already been
swapped out.

     On a busy system with a high number of process
creations/terminations, using a track_script with
pgrep/pidof/killall may be more efficient, although those
processes are inefficient compared to the minimum that
keepalived needs.


     Using pgrep etc on a system that is swapping can have a
significant detrimental impact on the performance of the
system, due to having to fetch swapped memory from the swap
space, thereby causing additional swapping.

     This is an implementation of RFC5880 (Bidirectional
forwarding detection), and this can be configured to work
between 2 keepalived instances, but using unweighted
track_bfds between a master/backup pair of VRRP instances
means that the VRRP instance will only be able to come up if
both VRRP instance are running, which somewhat defeats the
purpose of VRRP.

     This implementation has been tested with OpenBFDD
(available at

     The syntax for bfd instance is :

bfd_instance <STRING> {
    # BFD Neighbor IP (synonym neighbour_ip)
    neighbor_ip <IP ADDRESS>

    # Source IP to use (optional, except in order to ensure that the
    # local port is valid, it is required)
    source_ip <IP ADDRESS>

    # Required min RX interval, in ms
    # (default is 10 ms)
    min_rx <INTEGER>

    # Desired min TX interval, in ms
    # (default is 10 ms)
    min_tx <INTEGER>

    # Desired idle TX interval, in ms
    # (default is 1000 ms)
    idle_tx <INTEGER>

    # Number of missed packets after
    # which the session is declared down
    # (default is 5)
    multiplier <INTEGER>

    # Operate in passive mode (default is active)

    # outgoing IPv4 ttl to use (default 255)
    ttl <INTEGER>

    # outgoing IPv6 hoplimit to use (default 64)
    hoplimit <INTEGER>


    # maximum reduction of ttl/hoplimit
    #  in received packet (default 0)
    #  (255 disables hop count checking)
    max_hops <INTEGER>

    # Default tracking weight
    # Normally, positive weights are added to the vrrp instance priority when
    # the bfd instance is up, negative weights reduce the priority when it is down.
    # However, if reverse is specified, the priority is decreased when up and
    # increased when down. ’weight 0 reverse’ will cause the vrrp instance to be down
    # when the bfd instance is up, and vice versa.
    weight <‐253:253> [reverse]

    # Normally bfd event notifications are sent to both the VRRP and checker processes.
    # Specifying vrrp or checker will cause event notifications for this bfd_instance
    # only to be sent to the specified process

contains subblocks of VRRP script(s), VRRP synchronization
group(s), VRRP gratuitous ARP and unsolicited neighbour
advert delay group(s) and VRRP instance(s)

     The script will be executed periodically, every
<interval> seconds. Its exit code will be recorded for all
VRRP instances which monitor it.  Note that the script will
only be executed if at least one VRRP instance monitors it.

The default weight equals 0, which means that any VRRP
instance monitoring the script will transition to the fault
state after <fall> consecutive failures of the script. After
that, <rise> consecutive successes will cause VRRP instances
to leave the fault state, unless they are also in the fault
state due to other scripts or interfaces that they are

A positive weight means that <rise> successes will add
<weight> to the priority of all VRRP instances which monitor
it. On the opposite, a negative weight will be subtracted
from the initial priority in case of <fall> failures.

     The syntax for the vrrp script is:

# Adds a script to be executed periodically. Its exit code will be
# recorded for all VRRP instances and sync groups which are monitoring it.
vrrp_script <SCRIPT_NAME> {
    # path of the script to execute


    # seconds between script invocations, (default: 1 second)
    interval <INTEGER>

    # seconds after which script is considered to have failed
    timeout <INTEGER>

    # adjust priority by this weight, (default: 0)
    # For description of reverse, see track_script.
    # ’weight 0 reverse’ will cause the vrrp instance to be down when the
    # script is up, and vice versa.
    weight <INTEGER:‐253..253> [reverse]

    # required number of successes for OK transition
    rise <INTEGER>

    # required number of successes for KO transition
    fall <INTEGER>

    # user/group names to run script under.
    #  group default to group of user

    # assume script initially is in failed state

     Adds a file to be monitored. The file will be read
whenever it is modified. The value in the file will be
recorded for all VRRP instances and sync groups which
monitor it.  Note that the file will only be read if at
least one VRRP instance or sync group monitors it.

A value will be read as a number in text from the file.  If
the weight configured against the track_file is 0, a non‐
zero value in the file will be treated as a failure status,
and a zero value will be treated as an OK status, otherwise
the value will be  multiplied by the weight configured in
the track_file statement. If the result is less than ‐253
any VRRP instance or sync group monitoring the script will
transition to the fault state (the weight can be 254 to
allow for a negative value being read from the file).

If the vrrp instance or sync group is not the address owner
and the result is between ‐253 and 253, the result will be
added to the initial priority of the VRRP instance (a
negative value will reduce the priority), although the
effective priority will be limited to the range [1,254].

If a vrrp instance using a track_file is a member of a sync
group, unless sync_group_tracking_weight is set on the group
weight 0 must be set.  Likewise, if the vrrp instance is the


address owner, weight 0 must also be set.

     The syntax for vrrp track file is :

vrrp_track_file <STRING> {
    # file to track (weight defaults to 1)
    file <QUOTED_STRING>

    # optional default weight
    weight <‐254..254> [reverse]

    # create the file and/or initialise the value
    # This causes VALUE (default 0) to be written to
    # the specified file at startup if the file doesn’t
    # exist, unless overwrite is specified in which case
    # any existing file contents will be overwritten with
    # the specified value.
    init_file [VALUE] [overwrite]

     VRRP Sync Group is an extension to VRRP protocol. The
main goal is to define a bundle of VRRP instance to get
synchronized together so that transition of one instance
will be reflected to others group members.

In addition there is an enhanced notify feature for fine
state transition catching.

You can also define multiple track policy in order to force
state transition according to a third party event such as
interface, scripts, file, BFD.

Important: for a SYNC group to run reliably, it is vital
that all instances in the group are MASTER or that they are
all either BACKUP or FAULT. A situation with half instances
having higher priority on machine A half others with higher
priority on machine B will lead to constant re‐elections.
For this reason, when instances are grouped, any track
scripts/files configured against member VRRP instances will
have their tracking weights automatically set to zero, in
order to avoid inconsistent priorities across instances.

     The syntax for vrrp_sync_group is :

vrrp_sync_group <STRING> {
    group {
        # name of the vrrp_instance (see below)
        # Set of VRRP_Instance string


    # Synchronization group tracking interface, script, file & bfd will
    # update the status/priority of all VRRP instances which are members
    # of the sync group.
    # ’weight 0 reverse’ will cause the vrrp instance to be down when the
    # interface is up, and vice versa.
    track_interface {
        eth2 weight <‐253..253> [reverse]

    # add a tracking script to the sync group (<SCRIPT_NAME> is the name
    # of the vrrp_script entry) go to FAULT state if any of these go down
    # if unweighted.
    # reverse causes the direction of the adjustment of the priority to be reversed.
    track_script {
        <SCRIPT_NAME> weight <‐253..253> [reverse|no_reverse]

    # Files whose state we monitor, value is added to effective priority.
    # <STRING> is the name of a vrrp_track_file
    # weight defaults to weight configured in vrrp_track_file
    track_file {
        <STRING> weight <‐254..254> [reverse|noreverse]

    # Process to monitor, weight is added to effective priority.
    # <STRING> is the name of a vrrp_track_process
    # weight defaults to weight configured in vrrp_track_process.
    # See vrrp_instance track_process for description of weight.
    track_process {
        <STRING> weight <‐254..254> [reverse|noreverse]

    # BFD instances we monitor, value is added to effective priority.
    # <STRING> is the name of a BFD instance
    track_bfd {
        <STRING> weight <INTEGER: ‐253..253> [reverse|noreverse]

    # notify scripts and alerts are optional
    # filenames of scripts to run on transitions can be unquoted (if
    #Â just filename) or quoted (if it has parameters)
    # The username and groupname specify the user and group


    # under which the scripts should be run. If username is
    # specified, the group defaults to the group of the user.
    # If username is not specified, they default to the
    # global script_user and script_group

    # to MASTER transition
    notify_master /path/ [username [groupname]]

    # to BACKUP transition
    notify_backup /path/ [username [groupname]]

    # FAULT transition
    notify_fault "/path/ VG_1" [username [groupname]]

    # executed when stopping vrrp
    notify_stop <STRING>|<QUOTED‐STRING> [username [groupname]]

    # for ANY state transition.
    # "notify" script is called AFTER the notify_* script(s) and
    # is executed with 4 additional arguments after the configured
    # arguments provided by Keepalived:
    #   $(n‐3) = "GROUP"|"INSTANCE"
    #   $(n‐2) = name of the group or instance
    #   $(n‐1) = target state of transition (stop only applies to instances)
    #            ("MASTER"|"BACKUP"|"FAULT"|"STOP")
    #   $(n)   = priority value
    #   $(n‐3) and $(n‐1) are ALWAYS sent in uppercase, and the possible
    # strings sent are the same ones listed above
    # (note: STOP is only applicable to instances)
    notify <STRING>|<QUOTED‐STRING> [username [groupname]]

    # The notify fifo output is the same as the last 4 parameters for the "notify"
    # script, with the addition of "MASTER_RX_LOWER_PRI" instead of state for an
    # instance, and also "MASTER_PRIORITY" and "BACKUP_PRIORITY" if the priority
    # changes and notify_priority_changes is configured.
    # MASTER_RX_LOWER_PRI is used if a master needs to set some external state, such
    # as setting a secondary IP address when using Amazon AWS; if another keepalived
    # has transitioned to master due to a communications break, the lower priority
    # instance will have taken over the secondary IP address, and the proper master
    # needs to be able to restore it.

    # Send FIFO notifies for vrrp priority changes
    notify_priority_changes <BOOL>

    # Send email notification during state transition,
    # using addresses in global_defs above (default no,
    # unless global smtp_alert/smtp_alert_vrrp set)
    smtp_alert <BOOL>

    # DEPRECATED. Use track_interface, track_script and
    # track_file on vrrp_sync_groups instead.


    # allow sync groups to use differing weights.
    # This probably WON’T WORK, but is a replacement for
    # global_tracking in case different weights were used
    # across different vrrp instances in the same sync group.

     specifies the setting of delays between sending
gratuitous ARPs and unsolicited neighbour advertisements.
This is intended for when an upstream switch is unable to
handle being flooded with ARPs/NAs.

Use interface when the limits apply on the single physical
interface.  Use interfaces when a group of interfaces are
linked to the same switch and the limits apply to the switch
as a whole.

Note: Only one of interface or interfaces should be used per

If the global vrrp_garp_interval and/or vrrp_gna_interval
are set, any interfaces that aren’t specified in a
garp_group will inherit the global settings.

     The syntax for garp_group is :

garp_group {
    # Sets the interval between Gratuitous ARP (in seconds, resolution microseconds)
    garp_interval <DECIMAL>

    # Sets the default interval between unsolicited NA (in seconds, resolution microseconds)
    gna_interval <DECIMAL>

    # The physical interface to which the intervals apply
    interface <STRING>

    # A list of interfaces accross which the delays are aggregated.
    interfaces {

     A VRRP Instance is the VRRP protocol key feature. It
defines and configures VRRP behaviour to run on a specific
interface. Each VRRP Instances are related to a uniq


     The syntax for vrrp_instance is :

vrrp_instance <STRING> {
    # Initial state, MASTER|BACKUP
    # As soon as the other machine(s) come up,
    # an election will be held and the machine
    # with the highest priority will become MASTER.
    # So the entry here doesn’t matter a whole lot.
    state MASTER

    # interface for inside_network, bound by vrrp
    interface eth0

    # Use VRRP Virtual MAC.
    # NOTE: If sysctl net.ipv4.conf.all.rp_filter is set,
    # and this vrrp_instance is an IPv4 instance, using
    # this option will cause the individual interfaces to be
    # updated to the greater of their current setting, and
    # all.rp_filter, as will default.rp_filter, and all.rp_filter
    # will be set to 0.
    # The original settings are restored on termination.
    use_vmac [<VMAC_INTERFACE>]

    # Send/Recv VRRP messages from base interface instead of
    # VMAC interface

    # Use IPVLAN interface. keepalived will create a mode L2
    # ipvlan interface on top of the specified interface.
    # For IPv4 instances, an IP address is required, for IPv6
    # the address is optional, in which case the link local
    # address will be used.
    # The mode flags default to bridge. NOTE: the mode flags must be the
    # same for all ipvlans on the same underlying interface.
    # It is safer to configure an interface name, in case keepalived crashes
    # and restarts, in which case it can more reliably find a previously
    # created interface.
    use_ipvlan [<INTERFACE_NAME>] [IP_ADDRESS] [bridge|private|vepa]

    # force instance to use IPv6 (this option is deprecated since
    # the virtual ip addresses determine whether IPv4 or IPv6 is used).

    # Ignore VRRP interface faults (default unset)

    # optional, monitor these as well.
    # go to FAULT state if any of these go down if unweighted.
    # When a weight is specified in track_interface, instead of setting the vrrp
    # instance to the FAULT state in case of failure, its priority will be
    # increased by the weight when the interface is up (for positive weights),
    # or decreased by the weight’s absolute value when the interface is down
    # (for negative weights), unless reverse is specified, in which case the
    # direction of adjustment of the priority is reversed.


    # The weight must be comprised between ‐253 and +253 inclusive.
    # 0 is the default behaviour which means that a failure implies a
    # FAULT state. The common practice is to use positive weights to count a
    # limited number of good services so that the server with the highest count
    # becomes master. Negative weights are better to count unexpected failures
    # among a high number of interfaces, as it will not saturate even with high
    # number of interfaces. Use reverse to increase priority if an interfaces is down
    track_interface {
        eth2 weight <‐253..253> [reverse]

    # add a tracking script to the interface
    # (<SCRIPT_NAME> is the name of the vrrp_track_script entry)
    # The same principle as track_interface can be applied to track_script entries,
    # except that an unspecified weight means that the default weight declared in
    # the script will be used (which itself defaults to 0).
    # reverse causes the direction of the adjustment of the priority to be reversed.
    track_script {
        <SCRIPT_NAME> weight <‐253..253> [reverse|no_reverse]

    # Files whose state we monitor, value is added to effective priority.
    # <STRING> is the name of a vrrp_track_file
    track_file {
        <STRING> weight <‐254..254> [reverse|noreverse]

    # Positive weights are added/subtracted when the process is running,
    # negative weights are subtracted/added when the not running.
    # If reverse is specified, the addition/subtraction is reversed.
    # <STRING> is the name of a vrrp_track_process
    # weight defaults to weight configured in vrrp_track_process
    track_process {
        <STRING> weight <‐254..254> [reverse|noreverse]

    # BFD instances we monitor, value is added to effective priority,
    # unless reverse is specified, when the value is subtracted.
    # Positive weights are add/subtracted when the bfd instance is up,
    # negative weights are subtracted/added when the bfd instance is down.
    # <STRING> is the name of a BFD instance
    track_bfd {
        <STRING> weight <INTEGER: ‐253..253> [reverse|noreverse]



    # default IP for binding vrrpd is the primary IP
    # on interface. If you want to hide the location of vrrpd,
    # use this IP as src_addr for multicast or unicast vrrp
    # packets. (since it’s multicast, vrrpd will get the reply
    # packet no matter what src_addr is used).
    # optional
    mcast_src_ip <IPADDR>
    unicast_src_ip <IPADDR>

    # if the configured src_ip doesn’t exist or is removed put the
    # instance into fault state

    # VRRP version to run on interface
    #  default is global parameter vrrp_version, but IPv6 instances will
    #  always use version 3.
    version <2 or 3>

    # Do not send VRRP adverts over a VRRP multicast group.
    # Instead it sends adverts to the following list of
    # ip addresses using unicast. It can be cool to use
    # the VRRP FSM and features in a networking
    # environment where multicast is not supported!
    # IP addresses specified can be IPv4 as well as IPv6.
    unicast_peer {

    # The checksum calculation when using VRRPv3 changed after v1.3.6.
    #  Setting this flag forces the old checksum algorithm to be used
    #  to maintain backward compatibility, although keepalived will
    #  attempt to maintain compatibility anyway if it sees an old
    #  version checksum. Specifying never will turn off auto detection
    #  of old checksums. [This option may not be enabled ‐ check output
    #  of ‘keepalived ‐v‘ for OLD_CHKSUM_COMPAT.]
    old_unicast_checksum [never]

    # interface specific settings, same as global parameters.
    # default to global parameters
    garp_master_delay 10
    garp_master_repeat 1
    garp_lower_prio_delay 10
    garp_lower_prio_repeat 1
    garp_master_refresh 60
    garp_master_refresh_repeat 2
    garp_interval 100
    gna_interval 100

    # If a lower priority advert is received, don’t send another advert.
    # This causes adherence to the RFCs (defaults to global


    # vrrp_lower_priority_dont_send_advert).
    lower_prio_no_advert [<BOOL>]

    # If we are master and receive a higher priority advert, send an advert
    # (which will be lower priority than the other master), before we transition
    # to backup. This means that if the other master has garp_lower_prio_repeat
    # set, it will resend garp messages. This is to get around the problem of
    # their having been two simultaneous masters, and the last GARP
    # messages seen were from us.
    higher_prio_send_advert [<BOOL>]

    # arbitrary unique number from 1 to 255
    # used to differentiate multiple instances of vrrpd
    # running on the same NIC (and hence same socket).
    virtual_router_id 51

    # for electing MASTER, highest priority wins.
    # to be MASTER, make this 50 more than on other machines.
    priority 100

    # VRRP Advert interval in seconds (e.g. 0.92) (use default)
    advert_int 1

    # Note: authentication was removed from the VRRPv2 specification by
    # RFC3768 in 2004.
    #   Use of this option is non‐compliant and can cause problems; avoid
    #   using if possible, except when using unicast, where it can be helpful.
    authentication {
        # PASS|AH
        # PASS ‐ Simple password (suggested)
        # AH ‐ IPSEC (not recommended))
        auth_type PASS

        # Password for accessing vrrpd.
        # should be the same on all machines.
        # Only the first eight (8) characters are used.
        auth_pass 1234

    # addresses add|del on change to MASTER, to BACKUP.
    # With the same entries on other machines,
    # the opposite transition will be occurring.
    # For virutal_ipaddress, virtual_ipaddress_excluded,
    #   virtual_routes and virtual_rules most of the options
    #   match the options of the command ip address/route/rule add.
    #   The track_group option only applies to static addresses/routes/rules.
    #   no_track is specific to keepalived and means that the
    #   vrrp_instance will not transition out of master state
    #   if the address/route/rule is deleted and the address/route/rule
    #   will not be reinstated until the vrrp instance next transitions
    #   to master.
    # <LABEL>: is optional and creates a name for the alias.
               For compatibility with "ifconfig", it should
               be of the form <realdev>:<anytext>, for example


               eth0:1 for an alias on eth0.
    # <SCOPE>: ("site"|"link"|"host"|"nowhere"|"global")
    # preferred_lft is set to 0 to deprecate IPv6 addresses (this is the
    # default if the address mask is /128). Use "preferred_lft forever"
    # to specify that a /128 address should not be deprecated.
    virtual_ipaddress {
        <IPADDR>[/<MASK>] [brd <IPADDR>] [dev <STRING>] [scope <SCOPE>]
                          [label <LABEL>] [peer <IPADDR>] [home]
                          [‐nodad] [mngtmpaddr] [noprefixroute]
                          [autojoin] [no_track] [preferred_lft nn|forever] dev eth1 dev eth2 label eth2:1

    # VRRP IP excluded from VRRP optional.
    # For cases with large numbers (eg 200) of IPs
    # on the same interface. To decrease the number
    # of addresses sent in adverts, you can exclude
    # most IPs from adverts.
    # The IPs are add|del as for virtual_ipaddress.
    # Can also be used if you want to be able to add
    # a mixture of IPv4 and IPv6 addresses, since all
    # addresses in virtual_ipaddress must be of the
    # same family.
    virtual_ipaddress_excluded {
        <IPADDR>[/<MASK>] [brd <IPADDR>] [dev <STRING>] [scope <SCOPE>]
                          [label <LABEL>] [peer <IPADDR>] [home]
                          [‐nodad] [mngtmpaddr] [noprefixroute]
                          [autojoin] [no_track]
        <IPADDR>[/<MASK>] ...

    # Set the promote_secondaries flag on the interface to stop other
    # addresses in the same CIDR being removed when 1 of them is removed
    # For example if and are both configured on an
    # interface, and one is removed, unless promote_secondaries is set on
    # the interface the other address will also be removed.

    # routes add|del when changing to MASTER, to BACKUP.
    # See static_routes for more details
    virtual_routes {
        # src <IPADDR> [to] <IPADDR>/<MASK> via|gw <IPADDR>
        #   [or <IPADDR>] dev <STRING> scope <SCOPE> table <TABLE>
        src to via dev eth1 via dev eth1 dev eth2 no_track via via or dev eth1
        blackhole gw table 100  # To set a default gateway into table 100.


    # rules add|del when changing to MASTER, to BACKUP
    # See static_rules for more details
    virtual_rules {
        from table 1
        to table 1 no_track

    # VRRPv3 has an Accept Mode to allow the virtual router when not the
    # address owner to receive packets addressed to a VIP. This is the default
    # setting unless strict mode is set. As an extension, this also works for
    # VRRPv2 (RFC 3768 doesn’t define an accept mode).
    # ‐‐
    # Accept packets to non address‐owner

    # Drop packets to non address‐owner.

    # A higher priority VRRP instance will normally preempt a lower priority instance
    # when it comes online.  "nopreempt" stops the higher priority machine taking
    # over the master role, and allows the lower priority machine to remain as
    # master.
    # NOTE: For this to work, the initial state must not be MASTER.
    # ‐‐

    # for backwards compatibility

    # Seconds after startup or seeing a lower priority master until preemption
    # (if not disabled by "nopreempt").
    # Range: 0 (default) to 1000 (e.g. 4.12)
    # NOTE: For this to work, the initial state must not be MASTER.
    preempt_delay 300    # waits 5 minutes

    # See description of global vrrp_skip_check_adv_addr, which
    # sets the default value. Defaults to vrrp_skip_check_adv_addr
    skip_check_adv_addr [on|off|true|false|yes|no]

    # See description of global vrrp_strict
    # If vrrp_strict is not specified, it takes the value of vrrp_strict
    # If strict_mode without a parameter is specified, it defaults to on
    strict_mode [on|off|true|false|yes|no]

    # Debug level, not implemented yet.
    # LEVEL is a number in the range 0 to 4
    debug <LEVEL>

    # notify scripts, alert as above
    notify_master <STRING>|<QUOTED‐STRING> [username [groupname]]
    notify_backup <STRING>|<QUOTED‐STRING> [username [groupname]]
    notify_fault <STRING>|<QUOTED‐STRING> [username [groupname]]
    # executed when stopping vrrp
    notify_stop <STRING>|<QUOTED‐STRING> [username [groupname]]


    notify <STRING>|<QUOTED‐STRING> [username [groupname]]

    # The notify_master_rx_lower_pri script is executed if a master
    #  receives an advert with priority lower than the master’s priority.
    notify_master_rx_lower_pri <STRING>|<QUOTED‐STRING> [username [groupname]]

    # Send vrrp instance priority notifications on notify FIFOs.
    notify_priority_changes <BOOL>

    # Send SMTP alerts
    smtp_alert <BOOL>

    # Set socket receive buffer size (see global_defs
    # vrrp_rx_bufs_policy for explanation)

    # Set use of linkbeat for the interface of this VRRP instance. This option is
    # deprecated ‐ use linkbeat_interfaces block instead.

contains subblocks of Virtual server group(s) and Virtual

     The subblocks contain arguments for configuring Linux
IPVS (LVS) feature.  Knowledge of ipvsadm(8) will be helpful
here. Configuring LVS is achieved by defining virtual server
groups, virtual servers and optionally SSL configuration.
Every virtual server defines a set of real servers, you can
attach healthcheckers to each real server. Keepalived will
then lead LVS operation by dynamically maintaining topology.

     For details of what configuration combinations are
valid, see the ipvsadm(8) man page.

     Note: Where an option can be configured for a virtual
server, real server, and possibly checker, the virtual
server setting is the default for real servers, and the real
server setting is the default for checkers.

     Note: Tunnelled real/sorry servers can differ from the
address family of the virtual server and non tunnelled
real/sorry servers, which all have to be the same. If a
virtual server uses a fwmark, and all the real/sorry servers
are tunnelled, the address family of the virtual server will
be the same as the address family of the real/sorry servers
if they are all the same, otherwise it will default to IPv4
(use ip_family inet6 to override this).

     Note: The port for the virtual server can only be
omitted if the virtual service is persistent.


     This feature offers a way to simplify your
configuration by factorizing virtual server definitions. If
you need to define a bunch of virtual servers with exactly
the same real server topology then this feature will make
your configuration much more readable and will optimize
healthchecking task by only spawning one healthchecking
where multiple virtual server declaration will spawn a
dedicated healthchecker for every real server which will
waste system resources.

     Any combination of IP addresses, IP address ranges and
firewall marks can be used. Use of this option is intended
for very large LVSs.

     The syntax for virtual_server_group is :

virtual_server_group <STRING> {
    # Virtual IP Address and Port
    <IPADDR> [<PORT>]
    <IPADDR> [<PORT>]
    # <IPADDR RANGE> has the form
    # XXX.YYY.ZZZ.WWW‐VVV eg‐10
    # range includes both .1 and .10 address
    <IPADDR RANGE> [<PORT>] # VIP range [VPORT]
    # Firewall Mark (fwmark)
    fwmark <INTEGER>
    fwmark <INTEGER>

     A virtual_server can be a declaration of one of
<IPADDR> [<PORT>] , fwmark <INTEGER> or group <STRING>

     The syntax for virtual_server is :

virtual_server <IPADDR> [<PORT>]  |
virtual_server fwmark <INTEGER> |
virtual_server group <STRING> {
    # LVS scheduler
    lvs_sched rr|wrr|lc|wlc|lblc|sh|mh|dh|fo|ovf|lblcr|sed|nq

    # Enable hashed entry
    # Enable flag‐1 for scheduler (‐b flag‐1 in ipvsadm)
    # Enable flag‐2 for scheduler (‐b flag‐2 in ipvsadm)


    # Enable flag‐3 for scheduler (‐b flag‐3 in ipvsadm)
    # Enable sh‐port for sh scheduler (‐b sh‐port in ipvsadm)
    # Enable sh‐fallback for sh scheduler  (‐b sh‐fallback in ipvsadm)
    # Enable mh‐port for mh scheduler (‐b mh‐port in ipvsadm)
    # Enable mh‐fallback for mh scheduler  (‐b mh‐fallback in ipvsadm)
    # Enable One‐Packet‐Scheduling for UDP (‐O in ipvsadm)

    # Default LVS forwarding method.
    # Default tunnel type is ipip. Since Linux 5.2 the GUE tunnel type can
    # be specified. If using GUE, a port number is required. Since Linux 5.3
    # if the tunnel type is GUE, the checksum option can also be specified.
    # Since Linux 5.3, GRE tunnel type is also supported, but without the
    # remcsum option.
    lvs_method NAT|DR
    lvs_method TUN [type {ipip|gue port NUM|gre} [nocsum|csum|remcsum]]
    # LVS persistence engine name (currently only sip supported)
    persistence_engine <STRING>
    # LVS persistence timeout in seconds, default 6 minutes
    persistence_timeout [<INTEGER>]
    # LVS granularity mask (‐M in ipvsadm)
    persistence_granularity <NETMASK>
    # L4 protocol
    protocol TCP|UDP|SCTP
    # If VS IP address is not set,
    # suspend healthchecker’s activity

    # Send email notification during quorum up/down transition,
    # using addresses in global_defs above (default no,
    # unless global smtp_alert/smtp_alert_checker set)
    smtp_alert <BOOL>

    # Default VirtualHost string for HTTP_GET or SSL_GET
    # eg virtualhost www.firewall.loc
    # Overridden by virtualhost config of real server or checker
    virtualhost <STRING>

    # On daemon startup assume that all RSs are down
    # and healthchecks failed. This helps to prevent
    # false positives on startup. Alpha mode is
    # disabled by default.

    # On daemon shutdown consider quorum and RS
    # down notifiers for execution, where appropriate.
    # Omega mode is disabled by default.


    # Minimum total weight of all live servers in
    # the pool necessary to operate VS with no
    # quality regression. Defaults to 1.
    quorum <INTEGER>

    # Tolerate this much weight units compared to the
    # nominal quorum, when considering quorum gain
    # or loss. A flap dampener. Defaults to 0.
    hysteresis <INTEGER>

    # Script to execute when quorum is gained.
    quorum_up <STRING>|<QUOTED‐STRING> [username [groupname]]

    # Script to execute when quorum is lost.
    quorum_down <STRING>|<QUOTED‐STRING> [username [groupname]]

    # IP family for a fwmark service (only needed if all real servers are tunnelled
    # and persistence_granularity is not specified). Defaults to inet if not specified.
    ip_family inet|inet6

    # setup realserver(s)

    # RS to add to LVS topology when the quorum isn’t achieved.
    #  If a sorry server is configured, all real servers will
    #  be brought down when the quorum is not achieved.
    sorry_server <IPADDR> [<PORT>]
    # applies inhibit_on_failure behaviour to the sorry_server
    # Sorry server LVS forwarding method
    # For details of tunnel type, see virtual_server details.
    sorry_server_lvs_method NAT|DR
    sorry_server_lvs_method TUN [type {ipip|gue port NUM|gre} [nocsum|csum|remcsum]]

    # Optional connection timeout in seconds.
    # The default is 5 seconds
    connect_timeout <TIMER>

    # Retry count to make additional checks if check
    # of an alive server fails. Default: 1 unless specified below
    retry <INTEGER>

    # delay before retry after failure
    delay_before_retry <TIMER>

    # Optional random delay to start the initial check
    # for maximum N seconds.
    # Useful to scatter multiple simultaneous
    # checks to the same RS. Enabled by default, with
    # the maximum at delay_loop. Specify 0 to disable
    warmup <TIMER>

    # delay timer for checker polling
    delay_loop <TIMER>


    # Set weight to 0 when healthchecker detects failure

    # one entry for each realserver
    real_server <IPADDR> [<PORT>] {
        # relative weight to use, default: 1
        weight <INTEGER>
        # LVS forwarding method
        # For details of tunnel type, see virtual_server details.
        lvs_method NAT|DR
        lvs_method TUN [type {ipip|gue port NUM|gre} [nocsum|csum|remcsum]]

        # Script to execute when healthchecker
        # considers service as up.
        notify_up <STRING>|<QUOTED‐STRING> [username [groupname]]
        # Script to execute when healthchecker
        # considers service as down.
        notify_down <STRING>|<QUOTED‐STRING> [username [groupname]]

        # maximum number of connections to server
        uthreshold <INTEGER>
        # minimum number of connections to server
        lthreshold <INTEGER>

        # Send email notification during state transition,
        # using addresses in global_defs above (default yes,
        # unless global smtp_alert/smtp_alert_checker set)
        smtp_alert <BOOL>

        # Default VirtualHost string for HTTP_GET or SSL_GET
        # eg virtualhost www.firewall.loc
        # Overridden by virtualhost config of a checker
        virtualhost <STRING>

        alpha <BOOL>                    # see above
        connect_timeout <TIMER>         # see above
        retry <INTEGER>                 # see above
        delay_before_retry <TIMER>      # see above
        warmup <TIMER>                  # see above
        delay_loop <TIMER>              # see above
        inhibit_on_failure <BOOL>       # see above
        log_all_failures <BOOL>         # log all failures when checker up

        # healthcheckers. Can be multiple of each type

        # All checkers have the following options, except MISC_CHECK
        # which only has options alpha onwards, and BFD_CHECK which has none
        # of the standard options:
        CHECKER_TYPE {
            # ======== generic connection options
            # Optional IP address to connect to.
            # The default is the realserver IP


            connect_ip <IPADDR>

            # Optional port to connect to
            # The default is the realserver port
            connect_port <PORT>

            # Optional address to use to
            # originate the connection
            bindto <IPADDR>

            # Optional interface to use; needed if
            # the bindto address is IPv6 link local
            bind_if <IFNAME>

            # Optional source port to
            # originate the connection from
            bind_port <PORT>

            # Optional fwmark to mark all outgoing
            # checker packets with
            fwmark <INTEGER>

            alpha <BOOL>                    # see above
            connect_timeout <TIMER>         # see above
            retry <INTEGER>                 # see above
            delay_before_retry <TIMER>      # see above
            warmup <TIMER>                  # see above
            delay_loop <TIMER>              # see above

        # The following options are additional checker specific

        # HTTP and SSL healthcheckers
        HTTP_GET|SSL_GET {
            # HTTP protocol version, one of 1.0, 1.0C, 1.1
            # Protocol version 1.0C means version 1.0 with the addition
            # of a "Connection: close" line, which is included in
            # version 1.1 by default.
            http_protocol <PROTOCOL>
            # When alpha mode is set, or when recovering from a failure,
            # each URL is checked, with a delay of <delay_loop> between
            # each check. if there were 20 URLs, and the <delay_loop> were
            # 3 seconds, it would take 1 minute before the RS would come up
            # following startup, or recovery from a failure. Setting
            # fast_recovery removes the delay, both at start up and after
            # recovery from a failure, meaning that the RS will come up
            # once all the URLs have been checked, with no delay between
            # checking each URL.
            fast_recovery [<BOOL>]
            # An url to test
            # can have multiple entries here
            url {
              #eg path / , or path /mrtg2/
              path <STRING>


              # healthcheck needs digest
              # or status_code and digest
              # Digest computed with genhash
              # eg digest 9b3a0c85a887a256d6939da88aabd8cd
              digest <STRING>
              # status code returned in the HTTP header
              # eg status_code 200 or status_code 200‐299 400‐499 503 505
              # Default is 200‐299
              status_code <INTEGER|RANGE> [<INTEGER|RANGE>] ...
              # VirtualHost string. eg virtualhost www.firewall.loc
              # If not set, uses virtualhost from real or virtual server
              virtualhost <STRING>
              # Regular expression to search returned data against.
              # A failure to match causes the check to fail.
              regex <STRING>
              # Reverse the sense of the match, so a match of the
              # returned text causes the check to fail.
              # Space separated list of options for regex.
              #  See man pcre2api for a description of the options.
              #  The following option are supported:
              #   allow_empty_class alt_bsux auto_callout caseless
              #   dollar_endonly dotall dupnames extended firstline
              #   match_unset_backref multiline never_ucp never_utf
              #   no_auto_capture no_auto_possess no_dotstar_anchor
              #   no_start_optimize ucp ungreedy utf never_backslash_c
              #   alt_circumflex alt_verbnames use_offset_limit
              regex_options <OPTIONS>
              # For complicated regular expressions a larger stack
              #   may be needed, and this allows the start and maximum
              #   sizes in bytes to be specified. For more details see
              #   the documentation for pcre2_jit_stack_create()
              regex_stack <START> <MAX>
              # The minimum offset into the returned data to start
              #   checking for the regex pattern match. This can save
              #   processing time if the returned data is large.
              regex_min_offset <OFFSET>
              # The maximum offset into the returned data for the
              #   start of the subject match.
              regex_max_offset <OFFSET>

        SSL_GET {
            # when provided, send Server Name Indicator during SSL handshake

        # TCP healthchecker
        TCP_CHECK {
            # No additional options

        # SMTP healthchecker


        SMTP_CHECK {
            # Optional string to use for the SMTP HELO request
            helo_name <STRING>|<QUOTED‐STRING>

        # DNS healthchecker
        DNS_CHECK {
            # The retry default is 3.

            # DNS query type
            #   A|NS|CNAME|SOA|MX|TXT|AAAA
            # The default is SOA
            type <STRING>

            # Domain name to use for the DNS query
            # The default is . (dot)
            name <STRING>

        # MISC healthchecker, run a program
        MISC_CHECK {
            # The retry default is 0.

            # External script or program
            misc_path <STRING>|<QUOTED‐STRING>
            # Script execution timeout
            misc_timeout <INTEGER>

            # If set, the exit code from healthchecker is used
            # to dynamically adjust the weight as follows:
            #   exit status 0: svc check success, weight
            #     unchanged.
            #   exit status 1: svc check failed.
            #   exit status 2‐255: svc check success, weight
            #     changed to 2 less than exit status.
            #   (for example: exit status of 255 would set
            #     weight to 253)
            # NOTE: do not have more than one dynamic MISC_CHECK per real_server.

            # Specify the username/groupname that the script should
            #   be run under.
            # If GROUPNAME is not specified, the group of the user
            #   is used
            user USERNAME [GROUPNAME]

        # BFD instance name to check
        BFD_CHECK {
            name <STRING>


     # Parameters used for SSL_GET check.
# If none of the parameters are specified, the SSL context
# will be auto generated.
    # Password
    password <STRING>
    # CA file
    ca <STRING>
    # Certificate file
    certificate <STRING>
    # Key file
    key <STRING>

     Configuration parser has been extended to support
advanced features such as conditional configuration and
parameter substitution. These features are very usefull for
any scripted env where configuration template are generated

The config‐id defaults to the first part of the node name as
returned by uname, and can be overridden with the ‐i or
‐‐config‐id command line option.

     Any configuration line starting with ’@’ is a
conditional configuration line.  The word immediately
following (i.e. without any space) the ’@’ character is
compared against the config‐id, and if they don’t match, the
configuration line is ignored.

     Alternatively, ’@^’ is a negative comparison, so if the
word immediately following does NOT match the config‐id, the
configuration line IS included.

     The purpose of this is to allow a single configuration
file to be used for multiple systems, where the only
differences are likely to be the router_id, vrrp instance
priorities, and possibly interface names and unicast

     For example:

         global_defs {
        @main   router_id main_router
        @backup router_id backup_router
    vrrp_instance VRRP {
        @main    unicast_src_ip


        @backup  unicast_src_ip
        @backup2 unicast_src_ip
        unicast_peer {

     If keepalived is invoked with ‐i main, then the
router_id will be set to main_router, if invoked with ‐i
backup, then backup_router, if not invoked with ‐i, or with
‐i anything else, then the router_id will not be set. The
unicast peers for main will be and

Substitutable parameters can be specified. The format for
defining a parameter is:


     where there must be no space before the ’=’ and only
whitespace may preceed to ’$’.  Empty values are allowed.

Parameter names can be made up of any combination of A‐Za‐
z0‐9 and _, but cannot start with a digit. Parameter names
starting with an underscore should be considered reserved
names that keepalived will define for various pre‐defined

After a parameter is defined, any occurrence of $PARAMETER
followed by whitespace, or any occurrence of ${PARAMETER}
(which need not be followed by whitespace) will be replaced

Replacement is recursive, so that if a parameter value
itself includes a replaceable parameter, then after the
first substitution, the parameter in the value will then be
replaced; the substitution is done at replacement time and
not at definition time, so for example:


    will produce:

     Note in the above examples the use of both ADDRESS_BASE
and ADDRESS_BASE_SUB required braces ({}) since the
parameters were not followed by whitespace (after the first


substitution which produced 10.2.${ADDRESS_BASE_SUB}.100/32
the parameter is still not followed by whitespace).

If a parameter is not defined, it will not be replaced at
all, so for example ${UNDEF_PARAMETER} will remain in the
configuration if it is undefined; this means that existing
configuration that contains a ’$’ character (for example in
a script definition) will not be changed so long as no new
parameter definitions are added to the configuration.

Parameter substitution works in conjunction with conditional
configuration.  For example:

         @main $PRIORITY=240
    @backup $PRIORITY=200
    vrrp_instance VI_0 {
        priority $PRIORITY

    will produce:
        vrrp_instance VI_0 {
            priority 240
        if the config_id is main.

    $IF_MAIN priority 240

    will produce:
        priority 240
        if the config_id is main and nothing if the config_id is not main,
        although why anyone would want to use this rather than simply the
        following is not known (but still possible):
            @main priority 240

     Multiline definitions are also supported, but when used
there must be nothing on the line after the parameter name.
A multiline definition is specified by ending each line
except the last with a ’\’ character.

    $INSTANCE= \
    vrrp_instance VI_${NUM} { \
        interface eth0.${NUM} \
        use_vmac vrrp${NUM}.1 \
        virtual_router_id 1 \
        @high priority 130 \
        @low priority 120 \
        advert_int 1 \
        virtual_ipaddress { \
            10.0.${NUM}.254/24 \
        } \


        track_script { \
            offset_instance_${NUM} \
        } \



     The use of multiline definitions can be nested.

    $RS= \
    real_server 192.168.${VS_NUM}.${RS_NUM} 80 { \
        weight 1 \
        inhibit_on_failure \
        smtp_alert \
        MISC_CHECK { \
            misc_path "${_PWD}/scripts/ RS_misc.${INST}.${VS_NUM}.${RS_NUM}.0 10.0.${VS_NUM}.4:80‐>192.168.${VS_NUM}.${RS_NUM}:80" \
        } \

        MISC_CHECK { \
            misc_path "${_PWD}/scripts/ RS_misc.${INST}.${VS_NUM}.${RS_NUM}.1 10.0.${VS_NUM}.4:80‐>192.168.${VS_NUM}.${RS_NUM}:80" \
        } \

        notify_up "${_PWD}/scripts/ RS_notify.${INST}.${VS_NUM}.${RS_NUM} UP 10.0.${VS_NUM}.4:80‐>192.168.${VS_NUM}.${RS_NUM}:80" \

        notify_down "${_PWD}/scripts/ RS_notify.${INST}.${VS_NUM}.${RS_NUM} DOWN 10.0.${VS_NUM}.4:80‐>192.168.${VS_NUM}.${RS_NUM}:80" \


    $VS= \
    virtual_server 10.0.${VS_NUM}.4 80 { \
        quorum 2 \
        quorum_up "${_PWD}/scripts/ VS_notify.${INST} UP 10.0.${VS_NUM}.4:80" \
        quorum_down "${_PWD}/scripts/ VS_notify.${INST} DOWN 10.0.${VS_NUM}.4:80" \
        $RS_NUM=1 \
        $RS \
        $RS_NUM=2 \
        $RS \
        $RS_NUM=3 \
        $RS \




     The above will create 2 virtual servers, each with 3
real servers

     The following pre‐defined definitions are defined:

${_PWD} : The directory of the current configuration file
(this can be changed if using the include directive).
${_INSTANCE} : The instance name (as defined by the ‐i
option, defaults to hostname).
${_RANDOM [MIN [MAX]]} : This is replaced by a random
integer in the range [MIN, MAX], where MIN and MAX are
optional non‐negative integers. Defaults are MIN=0 and

     Additional pre‐defined definitions will be added as
their need is identified.  It will normally be quite
straightforward to add additional pre‐defined definitions,
so if you need one, or have a good idea for one, then raise
an issue at
requesting it.

     A line starting ~SEQ(var, start, step, end) will cause
the remainder of the line to be processed multiple times,
with the variable $var set initially to start, and then $var
will be incremented by step repeatedly, terminating when it
is greater than end. step may be omitted, in which case it
defaults to 1 or ‐1, depending on whether end is greater or
less than start. start may also be omitted, in which case it
defaults to 1 if end > 0 or ‐1 if end < 0. so, for example:

         ~SEQ(SUBNET, 0, 3) ip_address 10.0.$SUBNET.1

    would produce:

     There can be multiple ~SEQ elements on a line, so for

         $VI4= \
    vrrp_track_file offset_instance_4.${IF}.${NUM}.${ID} { \
        file "${_PWD}/679/track_files/4.${IF}.${NUM}.${ID}" \
        weight ‐100 \
    } \
    vrrp_instance vrrp4.${IF}.${NUM}.${ID} { \
        interface bond${IF}.${NUM} \
        use_vmac vrrp4.${IF}.${NUM}.${ID} \
        virtual_router_id ${ID} \


        priority 130 \
        virtual_ipaddress { \
            10.${IF}.${NUM}.${ID}/24 \
        } \
        track_file { \
            offset_instance_4.${IF}.${NUM}.${ID} \
        } \

    ~SEQ(IF,0,7) ~SEQ(NUM,0,31) ~SEQ(ID,1,254) $VI4

    will produce 65024 vrrp instances with names from vrrp4.0.0.1 through to

Initial by Joseph Mack. Extensive updates by Alexandre
Cassen & Quentin Armitage.

ipvsadm(8), ip ‐‐help.