uudecode(1)                       User Commands                      uudecode(1)

       uudecode - decode an encoded file

       uudecode [-flags] [-flag [value]] [--option-name[[=| ]value]] [<file>...]

       If no file(s) are provided, then standard input is decoded.

       uudecode transforms uuencoded files into their original form.

       The encoded file(s) may be specified on the command line, or one may be
       read from standard input.  The output file name is specified in the
       encoded file, but may be overridden with the -o option.  It will have the
       mode of the original file, except that setuid and execute bits are not
       retained.  If the output file is specified to be /dev/stdout or -, the
       result will be written to standard output. If there are multiple input
       files and the second or subsquent file specifies standard output, the
       decoded data will be written to the same file as the previous output.
       Don't do that.

       uudecode ignores any leading and trailing lines.  It looks for a line
       that starts with "begin" and proceeds until the end-of-encoding marker is
       found.  The program determines from the header line of the encoded file
       which of the two supported encoding schemes was used and whether or not
       the output file name has been encoded with base64 encoding.  See

       -o file, --output-file=file
              direct output to file.

              If specified, decoded data are written to this file.  When
              multiple inputs are specified on the command line, this option
              cannot be specified.  All decoded data must be written to the file
              name encoded in the data.

       -c, --ignore-chmod
              ignore fchmod(3P) errors.

              By default, if the output file permissions cannot be changed to
              the permissions specified in the encoded data, the file will not
              be written out and execution stops.  This option will cause that
              error to be ignored.  The resulting file will have all the data,
              but the incorrect mode settings.

              fchmod() errors are also ignored if POSIXLY_CORRECT is set in the
              environment.  RE: http://austingroupbugs.net/view.php?id=635

              A warning is always emitted when fchmod() fails.

       -h, --help
              Display usage information and exit.

       -!, --more-help
              Pass the extended usage information through a pager.

       -R [cfgfile], --save-opts [=cfgfile]
              Save the option state to cfgfile.  The default is the last
              configuration file listed in the OPTION PRESETS section, below.
              The command will exit after updating the config file.

       -r cfgfile, --load-opts=cfgfile, --no-load-opts
              Load options from cfgfile.  The no-load-opts form will disable the
              loading of earlier config/rc/ini files.  --no-load-opts is handled
              early, out of order.

       -v [{v|c|n --version [{v|c|n}]}]
              Output version of program and exit.  The default mode is `v', a
              simple version.  The `c' mode will print copyright information and
              `n' will print the full copyright notice.

       Any option that is not marked as not presettable may be preset by loading
       values from configuration ("RC" or ".INI") file(s).  The file
       "$HOME/.sharrc" will be used, if present.

       This implementation is compliant with P1003.2b/D11.

       See OPTION PRESETS for configuration files.

       One of the following exit values will be returned:

       0  (EXIT_SUCCESS)
              Successful program execution.

              The command options were misconfigured.

       2  (EXIT_INVALID)
              (warning) One or more input files contained no valid data

       4  (EXIT_NO_INPUT)
              (warning) The specified input file was not found

       8  (EXIT_NO_OUTPUT)
              The specified output file could not be created (error); or else
              one of the output files could not be written or its access mode
              could not be changed (warnings).  The accompanying message(s) will

       9  (EXIT_NO_MEM)
              No process memory available

       66  (EX_NOINPUT)
              A specified configuration file could not be loaded.

       70  (EX_SOFTWARE)
              libopts had an internal operational error.  Please report it to
              autogen-users@lists.sourceforge.net.  Thank you.

              The exit status codes are (mostly) warning codes.  As such, each
              code is "or"-ed into the final exit code as the input files are
              processed.  For example, an exit code of '6' is not listed above.
              It is the sum of EXIT_INVALID and EXIT_NO_INPUT.  It would mean
              that at least one input file contained invalid data and also at
              least one input file could not be found at all.

       uuencode(1), uuencode(5)

       Free Software Foundation, Inc.

       Copyright (C) 1994-2015 Free Software Foundation, Inc. all rights
       reserved.  This program is released under the terms of the GNU General
       Public License, version 3 or later.

       Please put sharutils in the subject line for emailed bug reports.  It
       helps to spot the message.

       If more than one name in the encoded files are the same, or if the second
       or following input files specifies standard output for the output file,
       then the result is probably not what is expected.  Specifically, standard
       output will be appended to and named output files will be replaced.

       Please send bug reports to: bug-gnu-utils@gnu.org

       This manual page was AutoGen-erated from the uudecode option definitions.

GNU sharutils (4.15.2)             30 May 2015                       uudecode(1)