vector

vector(1grass)                Grass User's Manual               vector(1grass)



GRASS GIS 7.6.1 Reference Manual
       Geographic Resources Analysis Support System, commonly referred to as
       GRASS, is a Geographic Information System (GIS) used for geospatial
       data management and analysis, image processing, graphics/maps
       production, spatial modeling, and visualization. GRASS is currently
       used in academic and commercial settings around the world, as well as
       by many governmental agencies and environmental consulting companies.

       This reference manual details the use of modules distributed with
       Geographic Resources Analysis Support System (GRASS), an open source
       (GNU GPLed), image processing and geographic information system (GIS).
       Go to vector introduction | topics

       Go back to help overview

   Vector commands:
       v.buffer                                                     Creates a buffer around vector features of given type.

       v.build.all                                                  Rebuilds topology on all vector maps in the current mapset.

       v.build                                                      Creates topology for vector map.

       v.build.polylines                                            Builds polylines from lines or boundaries.

       v.category                                                   Attaches, deletes or reports vector categories to map
                                                                    geometry.

       v.centroids                                                  Adds missing centroids to closed boundaries.

       v.class                                                      Classifies attribute data, e.g. for thematic mapping

       v.clean                                                      Toolset for cleaning topology of vector map.

       v.clip                                                       Extracts features of input map which overlay features of
                                                                    clip map.

       v.cluster                                                    Performs cluster identification.

       v.colors                                                     Creates/modifies the color table associated with a vector
                                                                    map.

       v.colors.out                                                 Exports the color table associated with a vector map.

       v.db.addcolumn                                               Adds one or more columns to the attribute table connected to
                                                                    a given vector map.

       v.db.addtable                                                Creates and connects a new attribute table to a given layer
                                                                    of an existing vector map.

       v.db.connect                                                 Prints/sets DB connection for a vector map to attribute
                                                                    table.

       v.db.dropcolumn                                              Drops a column from the attribute table connected to a given
                                                                    vector map.

       v.db.droprow                                                 Removes a vector feature from a vector map through attribute
                                                                    selection.

       v.db.droptable                                               Removes existing attribute table of a vector map.

       v.db.join                                                    Joins a database table to a vector map table.


       v.db.reconnect.all                                           Reconnects attribute tables for all vector maps from the
                                                                    current mapset to a new database.

       v.db.renamecolumn                                            Renames a column in the attribute table connected to a given
                                                                    vector map.

       v.db.select                                                  Prints vector map attributes.

       v.db.univar                                                  Calculates univariate statistics on selected table column
                                                                    for a GRASS vector map.

       v.db.update                                                  Updates a column in the attribute table connected to a
                                                                    vector map.

       v.decimate                                                   Decimates a point cloud

       v.delaunay                                                   Creates a Delaunay triangulation from an input vector map
                                                                    containing points or centroids.

       v.dissolve                                                   Dissolves boundaries between adjacent areas sharing a common
                                                                    category number or attribute.

       v.distance                                                   Finds the nearest element in vector map ’to’ for elements in
                                                                    vector map ’from’.

       v.drape                                                      Converts 2D vector features to 3D by sampling of elevation
                                                                    raster map.

       v.edit                                                       Edits a vector map, allows adding, deleting and modifying
                                                                    selected vector features.

       v.external                                                   Creates a new pseudo-vector map as a link to an
                                                                    OGR-supported layer or a PostGIS feature table.

       v.external.out                                               Defines vector output format.

       v.extract                                                    Selects vector features from an existing vector map and
                                                                    creates a new vector map containing only the selected
                                                                    features.

       v.extrude                                                    Extrudes flat vector features to 3D vector features with
                                                                    defined height.

       v.generalize                                                 Performs vector based generalization.

       v.hull                                                       Produces a 2D/3D convex hull for a given vector map.

       v.import                                                     Imports vector data into a GRASS vector map using OGR
                                                                    library and reprojects on the fly.

       v.in.ascii                                                   Creates a vector map from an ASCII points file or ASCII
                                                                    vector file.

       v.in.db                                                      Creates new vector (points) map from database table
                                                                    containing coordinates.

       v.in.dxf                                                     Converts file in DXF format to GRASS vector map.

       v.in.e00                                                     Imports E00 file into a vector map.

       v.in.geonames                                                Imports geonames.org country files into a vector points map.

       v.in.lines                                                   Imports ASCII x,y[,z] coordinates as a series of lines.



       v.in.mapgen                                                  Imports Mapgen or Matlab-ASCII vector maps into GRASS.

       v.in.ogr                                                     Imports vector data into a GRASS vector map using OGR
                                                                    library.

       v.in.pdal                                                    Converts LAS LiDAR point clouds to a GRASS vector map with
                                                                    PDAL.

       v.in.region                                                  Creates a vector polygon from the current region extent.

       v.in.wfs                                                     Imports GetFeature from a WFS server.

       v.info                                                       Outputs basic information about a vector map.

       v.kcv                                                        Randomly partition points into test/train sets.

       v.kernel                                                     Generates a raster density map from vector points map.

       v.label                                                      Creates paint labels for a vector map from attached
                                                                    attributes.

       v.label.sa                                                   Create optimally placed labels for vector map(s)

       v.lidar.correction                                           Corrects the v.lidar.growing output. It is the last of the
                                                                    three algorithms for LIDAR filtering.

       v.lidar.edgedetection                                        Detects the object’s edges from a LIDAR data set.

       v.lidar.growing                                              Building contour determination and Region Growing algorithm
                                                                    for determining the building inside

       v.lrs.create                                                 Creates a linear reference system.

       v.lrs.label                                                  Creates stationing from input lines, and linear reference
                                                                    system.

       v.lrs.segment                                                Creates points/segments from input lines, linear reference
                                                                    system and positions read from stdin or a file.

       v.lrs.where                                                  Finds line id and real km+offset for given points in vector
                                                                    map using linear reference system.

       v.mkgrid                                                     Creates a vector map of a user-defined grid.

       v.neighbors                                                  Neighborhood analysis tool for vector point maps.

       v.net.alloc                                                  Allocates subnets for nearest centers.

       v.net.allpairs                                               Computes the shortest path between all pairs of nodes in the
                                                                    network.

       v.net.bridge                                                 Computes bridges and articulation points in the network.

       v.net.centrality                                             Computes degree, centrality, betweeness, closeness and
                                                                    eigenvector centrality measures in the network.

       v.net.components                                             Computes strongly and weakly connected components in the
                                                                    network.

       v.net.connectivity                                           Computes vertex connectivity between two sets of nodes in
                                                                    the network.

       v.net.distance                                               Computes shortest distance via the network between the given
                                                                    sets of features.


       v.net.flow                                                   Computes the maximum flow between two sets of nodes in the
                                                                    network.

       v.net                                                        Performs network maintenance.

       v.net.iso                                                    Splits subnets for nearest centers by cost isolines.

       v.net.path                                                   Finds shortest path on vector network.

       v.net.salesman                                               Creates a cycle connecting given nodes (Traveling salesman
                                                                    problem).

       v.net.spanningtree                                           Computes minimum spanning tree for the network.

       v.net.steiner                                                Creates Steiner tree for the network and given terminals.

       v.net.timetable                                              Finds shortest path using timetables.

       v.net.visibility                                             Performs visibility graph construction.

       v.normal                                                     Tests for normality for vector points.

       v.out.ascii                                                  Exports a vector map to a GRASS ASCII vector representation.

       v.out.dxf                                                    Exports vector map to DXF file format.

       v.out.ogr                                                    Exports a vector map layer to any of the supported OGR
                                                                    vector formats.

       v.out.postgis                                                Exports a vector map layer to PostGIS feature table.

       v.out.pov                                                    Converts GRASS x,y,z points to POV-Ray x,z,y format.

       v.out.svg                                                    Exports a vector map to SVG file.

       v.out.vtk                                                    Converts a vector map to VTK ASCII output.

       v.outlier                                                    Removes outliers from vector point data.

       v.overlay                                                    Overlays two vector maps offering clip, intersection,
                                                                    difference, symmetrical difference, union operators.

       v.pack                                                       Exports a vector map as GRASS GIS specific archive file

       v.parallel                                                   Creates parallel line to input vector lines.

       v.patch                                                      Creates a new vector map by combining other vector maps.

       v.perturb                                                    Random location perturbations of vector points.

       v.profile                                                    Vector map profiling tool

       v.proj                                                       Re-projects a vector map from one location to the current
                                                                    location.

       v.qcount                                                     Indices for quadrat counts of vector point lists.

       v.random                                                     Generates random 2D/3D vector points.

       v.rast.stats                                                 Calculates univariate statistics from a raster map based on
                                                                    a vector map and uploads statistics to new attribute
                                                                    columns.




       v.reclass                                                    Changes vector category values for an existing vector map
                                                                    according to results of SQL queries or a value in attribute
                                                                    table column.

       v.rectify                                                    Rectifies a vector by computing a coordinate transformation
                                                                    for each object in the vector based on the control points.

       v.report                                                     Reports geometry statistics for vector maps.

       v.sample                                                     Samples a raster map at vector point locations.

       v.segment                                                    Creates points/segments from input vector lines and
                                                                    positions.

       v.select                                                     Selects features from vector map (A) by features from other
                                                                    vector map (B).

       v.split                                                      Splits vector lines to shorter segments.

       v.support                                                    Updates vector map metadata.

       v.surf.bspline                                               Performs bicubic or bilinear spline interpolation with
                                                                    Tykhonov regularization.

       v.surf.idw                                                   Provides surface interpolation from vector point data by
                                                                    Inverse Distance Squared Weighting.

       v.surf.rst                                                   Performs surface interpolation from vector points map by
                                                                    splines.

       v.timestamp                                                  Modifies a timestamp for a vector map.

       v.to.3d                                                      Performs transformation of 2D vector features to 3D.

       v.to.db                                                      Populates attribute values from vector features.

       v.to.lines                                                   Converts vector polygons or points to lines.

       v.to.points                                                  Creates points along input lines in new vector map with 2
                                                                    layers.

       v.to.rast                                                    Converts (rasterize) a vector map into a raster map.

       v.to.rast3                                                   Converts a vector map (only points) into a 3D raster map.

       v.transform                                                  Performs an affine transformation (shift, scale and rotate)
                                                                    on vector map.

       v.type                                                       Changes type of vector features.

       v.univar                                                     Calculates univariate statistics of vector map features.

       v.unpack                                                     Imports a GRASS GIS specific vector archive file (packed
                                                                    with v.pack) as a vector map

       v.vect.stats                                                 Count points in areas, calculate statistics from point
                                                                    attributes.

       v.vol.rst                                                    Interpolates point data to a 3D raster map using regularized
                                                                    spline with tension (RST) algorithm.

       v.voronoi                                                    Creates a Voronoi diagram constrained to the extents of the
                                                                    current region from an input vector map containing points or
                                                                    centroids.


       v.what                                                       Queries a vector map at given locations.

       v.what.rast                                                  Uploads raster values at positions of vector points to the
                                                                    table.

       v.what.rast3                                                 Uploads 3D raster values at positions of vector points to
                                                                    the table.

       v.what.strds                                                 Uploads space time raster dataset values at positions of
                                                                    vector points to the table.

       v.what.vect                                                  Uploads vector values at positions of vector points to the
                                                                    table.


       Main index | Topics index | Keywords index | Graphical index | Full
       index

       © 2003-2019 GRASS Development Team, GRASS GIS 7.6.1 Reference Manual



GRASS 7.6.1                                                     vector(1grass)