WMCTRL(1)                    General Commands Manual                   WMCTRL(1)

       wmctrl - interact with a EWMH/NetWM compatible X Window Manager.

       wmctrl [ options | actions ]...

       wmctrl is a command that can be used to interact with an X Window manager
       that is compatible with the EWMH/NetWM specification.  wmctrl can query
       the window manager for information, and it can request that certain
       window management actions be taken.

       wmctrl is controlled entirely by its command line arguments. The command
       line arguments are used to specify the action to be performed (with
       options that modify behavior) and any arguments that might be needed to
       perform the actions.

       The following sections define the supported actions and options.
       Arguments to the actions and options are written in the form <ARGNAME> in
       the descriptions below. The detailed syntax for writing arguments are in
       a single section dedicated to that purpose.

       The following command line arguments can be specified to invoke a wmctrl
       action. Only one action can be executed with the invocation of the wmctrl

       -a <WIN>
              Switch to the desktop containing the window <WIN>, raise the
              window, and give it focus.

       -b  ( add | remove | toggle),prop1 [,prop2 ]
              Add, remove, or toggle up to two window properties simultaneously.
              The window that is being modified must be identified with a -r
              action. The property change is achived by using the EWMH
              _NET_WM_STATE request. The supported property names (for prop1 and
              prop2) are modal, sticky, maximized_vert, maximized_horz, shaded,
              skip_taskbar, skip_pager, hidden, fullscreen, above and below.
              Two properties are supported to allow operations like maximizing a
              window to full screen mode. Note that this action is made up of
              exactly two shell command line arguments.

       -c <WIN>
              Close the window <WIN> gracefully.

       -d     List all desktops managed by the window manager. One line is
              output for each desktop, with the line broken up into space
              separated columns. The first column contains an integer desktop
              number. The second column contains a '*' character for the current
              desktop, otherwise it contains a '-' character. The next two
              columns contain the fixed string DG: and then the desktop geometry
              as '<width>x<height>' (e.g. '1280x1024'). The following two
              columns contain the fixed string VP: and then the viewport
              position in the format '<y>,<y>' (e.g. '0,0'). The next three
              columns after this contains the fixed string WA: and then two
              columns with the workarea geometry as 'X,Y and WxH' (e.g. '0,0
              1280x998'). The rest of the line contains the name of the desktop
              (possibly containing multiple spaces).

       -e <MVARG>
              Resize and move a window that has been specified with a -r action
              according to the <MVARG> argument.

       -g w,h Change the geometry (common size) of all desktops so they are w
              pixels wide and h pixels high. w and h must be positive integers.
              A window manager may ignore this request.

       -h     Print help text about program usage.

       -I name
              Set the icon name (short title) of the window specified by a -r
              action to name.

       -k  ( on  |  off  )
              Turn on or off the window manager's "show the desktop" mode (if
              the window manager implements this feature).

       -l     List the windows being managed by the window manager. One line is
              output for each window, with the line broken up into space
              separated columns.  The first column always contains the window
              identity as a hexadecimal integer, and the second column always
              contains the desktop number (a -1 is used to identify a sticky
              window). If the -p option is specified the next column will
              contain the PID for the window as a decimal integer. If the -G
              option is specified then four integer columns will follow: x-
              offset, y-offset, width and height. The next column always
              contains the client machine name. The remainder of the line
              contains the window title (possibly with multiple spaces in the

       -m     Display information about the window manager and the environment.

       -n N   Change the number of desktops to N (a non-negative integer).

       -N name
              Set the name (long title) of the window specified by a -r action
              to name.

       -o x,y Change the viewport for the current desktop. The values x and y
              are numeric offsets that specify the position of the top left
              corner of the viewport. A window manager may ignore this request.

       -r <WIN>
              Specify a target window for an action.

       -R <WIN>
              Move the window <WIN> to the current desktop, raise the window,
              and give it focus.

       -s <DESK>
              Switch to the desktop <DESK>.

       -t <DESK>
              Move a window that has been specified with the -r action to the
              desktop <DESK>.

       -T name
              Set the both the name (long title) and icon name (short title) of
              the window specified by a -r action to name.  This action is like
              using the -N and -I actions at the same time (which would
              otherwise be impossible since wmctrl can execute only one action
              at a time).

       The following options modify the default actions, or they modify the
       interpretation of arguments.

       -F     Window name arguments (<WIN>) are to be treated as exact window
              titles that are case sensitive. Without this options window titles
              are considered to be case insensitive substrings of the full
              window title.

       -G     Include geometry information in the output of the -l action.

       -i     Interpret window arguments (<WIN>) as a numeric value rather than
              a string name for the window. If the numeric value starts with the
              prefix '0x' it is assumed to be a hexadecimal number.

       -p     Include PIDs in the window list printed by the -l action. Prints a
              PID of '0' if the application owning the window does not support

       -u     Override auto-detection and force UTF-8 mode.

       -v     Provide verbose output. This is really useful when debugging
              wmctrl itself.

       -w [ <WORKAROUND>[,<WORKAROUND>]... ]
              Use workarounds specified in the argument.

       -x     Include WM_CLASS in the window list or interpret <WIN> as the
              WM_CLASS name.

       <DESK> A Desktop is always specified by an integer which represents the
              desktop numbers. Desktop numbers start at 0.

              A move and resize argument has the format 'g,x,y,w,h'.  All five
              components are integers. The first value, g, is the gravity of the
              window, with 0 being the most common value (the default value for
              the window). Please see the EWMH specification for other values.

              The four remaining values are a standard geometry specification:
              x,y is the position of the top left corner of the window, and w,h
              is the width and height of the window, with the exception that the
              value of -1 in any position is interpreted to mean that the
              current geometry value should not be modified.

       <WIN>  This argument specifies a window that is the target of an action.
              By default the argument is treated as if were a string, and
              windows are examined until one is found with a title the contains
              the specified string as a substring. The substring matching is
              done in a case insensitive manner. The -F option may be used to
              force exact, case sensitive title matching. The option -i may be
              used to interpret the window target as a numeric window identity
              instead of a string.

              The window name string :SELECT: is treated specially. If this
              window name is used then wmctrl waits for the user to select the
              target window by clicking on it.

              The window name string :ACTIVE: may be used to instruct wmctrl to
              use the currently active window for the action.

              There is only one work around currently implemeted. It is
              specified by using the string DESKTOP_TITLES_INVALID_UTF8 and it
              causes the printing of non-ASCII desktop tiles correctly when
              using Window Maker.

       Getting a list of windows managed by the window manager

              wmctrl -l

       Getting a list of windows with PID and geometry information.

              wmctrl -p -G -l

       Going to the window with a name containing 'emacs' in it

              wmctrl -a emacs

       Shade a window with a title that contains the word 'mozilla'

              wmctrl -r mozilla -b add,shaded

       Close a very specifically titled window sticky

              wmctrl -F -c 'Debian bug tracking system - Mozilla'

       Toggle the 'stickiness' of a window with a specific window identity

              wmctrl -i -r 0x0120002 -b add,sticky

       Change the title of window to a specified string but choose the window by
       clicking on it

              wmctrl -r :SELECT: -T "Selected Window"

       zenity(1) is a useful dialog program for building scripts with wmctrl.

       Some examples of EWMH/NetWM compatible window managers include recent
       versions of Enlightenment, Icewm, Kwin, Sawfish and Xfce.

       wmctrl was written by Tomas Styblo <tripie@cpan.org>.

       This manual page was written by Shyamal Prasad <shyamal@member.fsf.org>
       for the Debian project (but may be used by others).

                                December 12, 2004                      WMCTRL(1)